Hardware Picofly DAT0 not reading correct voltage

[henryglends]

Hi all, having an issue with my picofly mod chip/adapter. I bought two different chips and tried both DAT0 flex cables in the EMMC, but could only get 0.020 volts max with either ribbon cable. Any idea what I’m doing wrong, besides user error?

 

[HawaiianInTown]

... Any idea what I’m doing wrong, besides user error?

Everything. New threads back-to-back regarding same issue. Not posting pictures regarding your soldering... everything.

 

[henryglends]

Everything. New threads back-to-back regarding same issue. Not posting pictures regarding your soldering... everything.

Yeah, I realize that now. I ended up figuring it out and realized my multimeter was set to the wrong mode, once set correctly I had the correct voltage reading. Had to set it to diode mode. Doesn’t matter now since I somehow pulled up the trace for clock, unless I can end up fixing that. Clearly I should’ve tried this on an already dead switch first before I screwed mine over

 

[henryglends]

somehow pulled up the trace for clock, unless I can end up fixing that.

I went to a repair shop since I know the owner and got it fixed and masked over, everything is working now! All that’s needed now is reassembly.