Look through this thread and picofly thread. You'll see different people saying their switches weren't turning on after installing those chips. Others have said maybe they're frying the emmc? Yes they can work, but like I said they're kind of hit or miss
i have switched to only using the rp2040-tiny. i started running into issues with the "picofly" chips. i cut pin 11 so i can use it as a second anchor point.
Hi, I'm stuck with an OLED, I hope you can help me.
When installing the chip it gives error *=* (No eMMC block 0 read (eMMC init failure?) and it boots normally in OFW. The diode values are all good. I've tried 3 different chips and 2 DAT0 adapters. I've carefully checked the CLK and CMD solders, which are the most delicate, and they look good. I'm running out of ideas. Could it be that the V2 flex I use for the CPU is damaged? Thanks
Hi, I'm stuck with an OLED, I hope you can help me.
When installing the chip it gives error *=* (No eMMC block 0 read (eMMC init failure?) and it boots normally in OFW. The diode values are all good. I've tried 3 different chips and 2 DAT0 adapters. I've carefully checked the CLK and CMD solders, which are the most delicate, and they look good. I'm running out of ideas. Could it be that the V2 flex I use for the CPU is damaged? Thanks
Use kimkaze mathed only. Working. And it is not easy to do that with out skill some time the chip is not empty use firmware for it if it not picoflay chip and same hwfly chip. Befor use it. Use laptop and see video how add firmware to chip.
Use kimkaze mathed only. Working. And it is not easy to do that with out skill some time the chip is not empty use firmware for it if it not picoflay chip and same hwfly chip. Befor use it. Use laptop and see video how add firmware to chip.
Hello, I've been missing for a while.
I received a switch, there is a chip based on picofly (rp2040).
It only starts in emummc.
Disassembling it I found this chip (never seen before, but it seems plug and play, convenient).
Inserting the mmc into the original socket, it starts normally.
Can I check something or do I have to install a new chip?
Thanks for your ideas.
Hello, I've been missing for a while.
I received a switch, there is a chip based on picofly (rp2040).
It only starts in emummc.
Disassembling it I found this chip (never seen before, but it seems plug and play, convenient).
Inserting the mmc into the original socket, it starts normally.
Can I check something or do I have to install a new chip?
Thanks for your ideas.
I need help! I got my rp2040 today and I wanted to flash it, but it didn't get detected by my PC. The led is blue long and 2-3 times yellow. I need help! Is my chip pre flashed?
I need help! I got my rp2040 today and I wanted to flash it, but it didn't get detected by my PC. The led is blue long and 2-3 times yellow. I need help! Is my chip pre flashed?
This is a Pikofly AIO Thread/Tutorial.
This information has been pulled from other threads and forums on this site, I haven't done anything except compile it in this one thread.
All credit goes to those who worked on all the relevant information and stuff.
First things First; I not not endorse piracy and those who released the firmware don't either so this is for home-brew use only.
DOING THIS MODIFCATION TO YOUR SWITCH MAY CAUSE PERMANENT DAMGE. I RECOMMEND YOU HAVE THIS DONE BY A PROFESSIONAL INSTALLER
DISCLAIMER! Me or any of the other temp members who helped make this happen can not be held liable to any damage you cause your console in attempting to mod it. Professional installation is recommended for this mod.
Just because a mod is cheap doesn't mean it's easy. - Trust me I learnt the hard way - Adran 2023
Mosfet (IRFHS8342 MOSFET) or cpu flex cable - I personally recommend - (v1 for v1, v2 flex for v2 mariko etc etc but yes you can use a v2 with a v1 flex and vice versa it just needs modding)
switch (duh)
Wire
RP2040 Firmware (Do not flash firmware from the archive folder unless advised to)
Not trying to be rude, but if you read the guide it tells you everything. As well as the hundreds of videos of installs on YouTube. You've been asking the same thing over and over with different posts for the past week. If it's too hard to comprehend, maybe this mod isn't for you. Your questions have been answered by multiple people.
It wasn't too long ago we saw our first glimpse of Courage Reborn, another Twilight Princess PC port in the works based on last year's decompilation efforts. With...
Seemingly out of nowhere a PC port for Pokemon Platinum has surfaced online, bundled alongside the source code for those interested in building and developing it for...
After much speculation, Nintendo has finally followed their competitors in announcing price increases for their hardware.
You can find a breakdown of what's changing...
Airing last night with very little in the way of warning, a brand new Nintendo Direct was aired. Running for 15 minutes in total, it took a moment to celebrate the...
With very little in the way of announcement, Valve has today increased the price of the Steam Deck but some fairly considerable margins. Both of the available models...
As a part of their Financial Results Briefing for the previous year, Nintendo president Shuntaro Furukawa took to the floor to answer key questions around the Switch...
Earlier this year, Sony announced major price increases for the PS5, PS5 Pro, and PlayStation Portal. Now the company is raising prices again, this time for...
We are once again here to tell you about a game leaking before its release, but for once, it's not one published by Nintendo. The game files for Microsoft's upcoming...
Continuing with the great news of Pokémon Platinum getting a native unofficial PC port just a few days ago, today, yet another classic title from the franchise has...
The latest in a growing number of native PC ports, Paper Mario ReCut got its first pre-release build earlier this week. Based on the N64 recompilation toolchain, the...
It wasn't too long ago we saw our first glimpse of Courage Reborn, another Twilight Princess PC port in the works based on last year's decompilation efforts. With...
With very little in the way of announcement, Valve has today increased the price of the Steam Deck but some fairly considerable margins. Both of the available models...
After much speculation, Nintendo has finally followed their competitors in announcing price increases for their hardware.
You can find a breakdown of what's changing...
Airing last night with very little in the way of warning, a brand new Nintendo Direct was aired. Running for 15 minutes in total, it took a moment to celebrate the...
Seemingly out of nowhere a PC port for Pokemon Platinum has surfaced online, bundled alongside the source code for those interested in building and developing it for...
Earlier this year, Sony announced major price increases for the PS5, PS5 Pro, and PlayStation Portal. Now the company is raising prices again, this time for...
As a part of their Financial Results Briefing for the previous year, Nintendo president Shuntaro Furukawa took to the floor to answer key questions around the Switch...
The latest in a growing number of native PC ports, Paper Mario ReCut got its first pre-release build earlier this week. Based on the N64 recompilation toolchain, the...
A whole hour of PlayStation content is on the way, thanks to the latest State of Play showcase. Headlining the stream will be Marvel's Wolverine, alongside a...
For the first time in 13 years, the Call of Duty series will again return to Nintendo's consoles. Set to launch on the 23rd of October, the latest release, Modern...
