Chips work fine friend. This is the 2nd batch. You have to check cpu pins to see if there is any bridge on your board.
You my friend have the bestest English.
I'll do an attempt at translating for the others:
"Is this chip custom made, and delivered assembled and ready to be programmed? Not possible to purchase on Aliexpress?"
The answer is: Yes. You use the files from this post: https://gbatemp.net/threads/picofly-a-hwfly-switch-modchip.622701/page-750#post-10367725
and make an order at JLCPCB with assembly included.
its 100% something hardware related. Just tried restoring my console by following level 1 and level 2 of sthetix guide and even wiping the entire nand and replacing it with a new one resorted with the same exact issue. Could there be something in the hardware side that could cause this? becuase it would be the only explanation onto why both emunand and sysnad both stopped working on the same time and why rebuilding my nand didnt work either and just produced the same issue
When Nintendo released firmware 17.0.0 they caused some problems.
https://gbatemp.net/threads/switch-stuck-at-nintendo-logo.651058/post-10380256
The question was whether your nand backup was completely clean or that you already used it with a CFW?
Would resorting to a factory reset maybe fix such issues?
Another thing I was wondering is whether the BOOT0 and BOOT1 partition are used from the sysnand.
I saw someone that posted a message that he could not use the emummc without a physical sysnand/emummc.
That would imply that if for some reason there a some data corruption that affect BOOT0 or BOOT1 then you would habe problems with both your sysnand and emummc.
hmm, that could be the case, if boot0 and boot1 are damaged then that could make sense on how both broke at the same time.
Also the only nand backup i did was AFTER my switch got fucked. Just incase i fucked it up even more while trying to restore it back.
Unfortunately i tried restoring this console using all 3 levels of sthetix guide and none worked. I frankly dont know what else to try
Post automatically merged:
its an oled. That would requiere to reball. Sadly i dont know how to do that rip lol.Try new mmc chip... If not change that may hardware problem....
Are the update fw that you rebuild the nand is fw support with cfw files in sd is it 18.0.0???
You
Need boot1 boot0 and prod info. For Orginal your oled... If no chip on motherboard are fulty and is mmc reson so buy Samsung mmc and send to repaire shop only...
Have you check trivial hardware like the cmd resistor, or the resistor around the emmc, for short circuit?
I finsh mod V2 console 18.0.0 fw and chose emummc it is working fine with hats pack 17.0.2 and when try go cfw it show error msg host pkgl... Ofw after nintendo logo black secreen.
what resistor near the emmc? i only see caps. But yes ive checked them and none are shorted.
wdym by pull up? also werent you talking about resistors near the emmc, not the cmd?
Similar threads
-
-
@
BigOnYa:
They actually enlisted Muslims, seriously, because the Muslims hates Jews, even tho it was not the supreme race. He claimed common hate, is friendship. -
-
-
@
BigOnYa:
So a man, wifey laying in bed, and man wants sum and rubs on her a little, she turns and says "Not tonight, I have a gyno apt in the morning." So man rolls over, but after few minutes starts rubbing her again. She says didn't you here me, no messing around, I have a gyno apt tomorrow. " Man says, "Well you don't have a dentist apt tomorrow also do you?"
-
-
@
BigOnYa:
Damn I have 8 modded rgh3 x360 slims I've done, I need to get rid of, I figured my family members or friends would want but times have changed. Think I'm gonna stop buying them and modding. Time to Switch it up (pun intended)
-
-
-
@
BigOnYa:
There literally no storms in your area, does it go out alot? You need to just send me your slim n ill rgh3 it free.
-
@
BigOnYa:
Or grow sum balls and do it yourself, not hard. More of a pain to jailbreak a ps4 than it is the 360, other than little soldering.
-
-
-
-
-
-
-
-
-
-
-
-
-
-