Hacking Hardware Picofly - a HWFLY switch modchip

[lightninjay]

yea im traing to find it

thanks , lets pray . i dont understand everything was working just fine , i reboot the console and no hekake just ofw, i tried a few more times on and off , alwys ofw and then purpple screen

Post automatically merged: Jun 22, 2023

here some pics

I know it doesn't REALLY matter, but for some reason it makes me cringe every time I read it.

It is spelled H-E-K-A-T-E and typically pronounced HECK-EIGHT. Seeing Hekake just makes me think of bukkake, which I would prefer not to think about. Just a friendly little PSA

 

[AceCuba]

ok i take it apart every resisstor was okp . every conection ok . when i put the battery back on , everything worket like nothing happers wtf

Post automatically merged: Jun 22, 2023

I know it doesn't REALLY matter, but for some reason it makes me cringe every time I read it.

It is spelled H-E-K-A-T-E and typically pronounced HECK-EIGHT. Seeing Hekake just makes me think of bukkake, which I would prefer not to think about. Just a friendly little PSA

sorry man really sory im from cuba spanish is my main languaje

 

[abal1000x]

.

 

[hippy dave]

I know it doesn't REALLY matter, but for some reason it makes me cringe every time I read it.

It is spelled H-E-K-A-T-E and typically pronounced HECK-EIGHT. Seeing Hekake just makes me think of bukkake, which I would prefer not to think about. Just a friendly little PSA

If we're gonna be picky, it should be pronounced Heck-a-Tea

 

[AceCuba]

Are you use 47Ohm resistor on cmd line?

offcurse 47ohm on cmd line no slowemcc , really wierd

 

[abal1000x]

.

 

[AceCuba]

v2 need 100ohm.

Try to backup the raw emmc, usually theres show problem.
Benchmark the emmc might not triggered it.

nop i made boot 0 boot 1 and raw emcc back up on the frist boot . mo issues no error no slow emcc , this is a tochiba using fw 2.73

 

[abal1000x]

.

 

[AceCuba]

That is why tracking the problem is difficult. You need to do lot of read/write of the emmc to triggered the problem. And its random to happened. I am sure that purple caused by the cmd resistor, but of course we cant confirm this, since the purple screen already gone.

the purple happends when after a 10 power off and on train to get to hekake , but only ofw , the issue go away just by putting the battery of and on . iam isntalling BUNCH OF THINGS TO THE EMCC 40mbs no issues , just to see if i can see a issue

Post automatically merged: Jun 23, 2023

any magnetic fusse out there that i can buy and sother to the reset on the pico ?

 

[lightninjay]

If we're gonna be picky, it should be pronounced Heck-a-Tea

I checked on the origin before making the post, both pronunciations are technically correct, but the modern Anglicism of the word is as I mentioned, HECK-eight. I normally pronounce it poshly, Heh-kah-tay.

 

[AceCuba]

hey a question here i have hack a few consoles now using picofly , all the samsung emcc boot in 1 sec , the tochibas are like ramdom time , its this normal in tochiba

 

[jkyoho]

v2 need 100ohm.

Try to backup the raw emmc, usually theres show problem.
Benchmark the emmc might not triggered it.

v2 with 47ohm HERE.
No issue backup emuMMC whatever

 

[AceCuba]

v2 with 47ohm HERE.
No issue backup emuMMC whatever

same i have made a a few lite and v2 using 47ohm and everything okp , ony Toshiba some times wive my some ramdom long or short glich times

 

[jkyoho]

same i have made a a few lite and v2 using 47ohm and everything okp , ony Toshiba some times wive my some ramdom long or short glich times

YEA, kind of interesting less ppl mentioning TOSHIBA issue maybe it just indeed YMMV

 

[AceCuba]

YMMV what that means

 

[jkyoho]

YMMV what that means

you milage may vary

 

[abal1000x]

.

 

[jkyoho]

Lets say indeed its because of TOSHIBA, then what is the probable solution, beside replacing the toshiba ic which is expensive?

increase 47ohm resistor setup to certain values(someone did mention before). I haven't got enough time testing TOSHIBA eMMC since last time I got that S-lite built with TOSHIBA

 

[abal1000x]

.

 

[jkyoho]

Yes and that is what i am suggesting to.
Using 100ohms in CMD line have less risk, and it could fixed the problematic emmc. And have no effect on the normal emmc.

Have you tested it yourself on TOSHIBA? and DAT0 and CLK keep 47 ohm?