Oh yes, I forgot that the RP2040 Zero barely fitsNah pi pico is too big.
Oh yes, I forgot that the RP2040 Zero barely fitsNah pi pico is too big.
If its not too much trouble, could you point to that sensor to remove please? I Assume gpio29 is adc-vref.
I only have pi pico atm. Waiting on a zero and want to test it out.
rp2040 one works?The current fw is meant for the rp2040 zero because of the LED. I bet the fw will still work on a Pico, but maybe the rgb code will bug stuff out.
I left the ldo onStill it didn't fit under the metallic shell without cutting a window after removing the two buttons, USB port and the LDO?
Green is 2.2k OhmsLot of respects for you guys. Huge work here, congrats.
Can someone please give me the values of those resistor, red, blue, green, and those two mosfets in yellow ?View attachment 360567
Also do you know with which software can we open leaked HWFly leaks schematics/ board files ? I tried Eagle/Kicad they are not working. Altium works but layout of pcb seems broken (see where the mosfet emplacement should be in white):
View attachment 360568
Thanks
The wires are just laying so I could cut out the window for the rp2040I had to cut a window for my Trinket M0. Been running that way for years now w/o issues. I did put some Kapton tape over the rough edges because I take apart all the time and don’t want to get a sheet metal metal cut.
Why are there wires running across the fan? Is that just temporary?
¡Los gastos de envío en tu país son escandalosos! es muy difícil saber el mejor lugar para buscar. tendrás mejor suerte buscando '8342 mosfet'. ¡pruébalo y verás! ah, e inglés en el foro principal, amigo mío.Colegas, ¿existe alguna alternativa al mosfet IRFHS8342TRPBF?
Are you using flux to get the solder to “stick” to the shiny parts? Flux is the magic nobody tells you about with Tiny Soldering.Any tip or trick for soldering the mosfet? I find it really tiny and I'm struggling with my iron. Currently I can't get HWFLY's flex.
installed picofy running atmospere very well but ofw blackscreen.any solution?
yes i did it, atmosphere running fine but ofw original hos blackscreenDid you run the unlock bin from hekate?
Sent from my iPhone using Tapatalk
check emmc speed on hekateDid you run the unlock bin from hekate?
Sent from my iPhone using Tapatalk
installed picofy running atmospere very well but ofw blackscreen.any solution?
thank you for your concern, i didnt update the firmware .i just swap out my hwfly with picofy chip and it ran good with hwfly before.Did you update the firmware with daybreak? If you did you need to reset the switch to fix boot0.
Check my aio thread if you want for the FAQs, as I'm trying to condense down all the information in this thread
He did say if you did this OFW shouldnt boot.thank you for your concern, i didnt update the firmware .i just swap out my hwfly with picofy chip and it ran good with hwfly before.
check emmc speed on hekate