just flash both in any orderso 2.5_nw then flash unlock over the top or just unlock? or flash unlock if previous fw is installed?
just flash both in any orderso 2.5_nw then flash unlock over the top or just unlock? or flash unlock if previous fw is installed?
Do I need to somehow clear the chip memory from the old firmware or just connect it to the PC via USB with the "boot" button pressed and upload the new firmware?fw_2.5_NW - the firmware itself, version with disabled start detection ("Non-Wait")
unlock - just a portion of data that enables HOS running (for any 2.0+ firmware)
yesis irfhs8342 and irs8342 mosfet the same?
"wire wrapping wire" on aliexpress,and where can i buy "~30gauge Kynar or enamel speaker wire"?
yes. either that, or the Hekate soft-wayjust connect it to the PC via USB with the "boot" button pressed and upload the new firmware?
Regarding the MOSFETs check the datasheet. For buying wires, here're some options: Ali (takes long time), RS, Digikey or other distributors. Try at your local repairman firstis irfhs8342 and irs8342 mosfet the same?
and where can i buy "~30gauge Kynar or enamel speaker wire"? will it be available at a local repairman?
the flash is very thick there. better to desolder the recommended onehttps://it.aliexpress.com/item/1005004917455909.html?spm=a2g0o.ppclist.product.4.2138s27fs27f4K&pdp_npi=2@dis!EUR!€ 7,19!€ 6,47!!!!!@211b446116793117298742287e2971!12000031010551974!btf&_t=pvid:8cbbef51-15aa-4c3e-a383-074b9de6a55b&afTraceInfo=1005004917455909__pc__pcBridgePPC__xxxxxx__1679311730&gatewayAdapt=glo2ita
it should work on this as well which is easier to put into consoles
I can say even more, due to the different boot sequence, it works much better on the patched v1Does it work on v1 patched consoles too
Yeah I would like to know if it works on v2 aswellGreat reversing work there!
Finally all the people that complained about HOS are now satisfied!
Question though,Does it work on v1 patched consoles too?
I know the boot sequence is different on these (the block reads if i recall) so that is why i m asking.
yesYeah I would like to know if it works on v2 aswell
how does pico differentiate between erista/mariko?I can say even more, due to the different boot sequence, it works much better on the patched v1
Thank you for your answer.I can say even more, due to the different boot sequence, it works much better on the patched v1
By monitoring the boot sequence i guess!how does pico differentiate between erista/mariko?
by the different boot sequence, of coursehow does pico differentiate between erista/mariko?
hekate startwhat if emmc is empty?
NS still tries to read it, in a different way in v1/v2what if emmc is empty?
perfectly fine, use central lineI've a spare CPU flex from HWFLY, should it be ok to use, or would I need thicker wiring as mentioned by rehius?