1. bikerspade

    bikerspade Member
    Newcomer

    Joined:
    Jan 23, 2019
    Messages:
    19
    Country:
    United States
    I recently setup USB Loader GX (r1271) and created an emunand with it. I have been able to successfully run many VC games (NEOGEO, TurboGrafx, Genesis) and a few WiiWare (Contra ReBirth and Cave Story) using "clOS emuNand" mode, and able to Castlevania ReBirth with neek2o (both from USB Loader GX game overrides or directly from the neek system menu). However, I have been unsuccessful in getting Gradius ReBirth from running (either version 0 or version 257). Launching results in a black screen. I have tried clOS emuNand mode and neek mode. I tried all the suggestions made by Cyan in a post from April 2018 regarding getting this game to run. The game apparently needs IOS55, and I believe I have the latest version of it.

    Here is my SysCheck:
    SysCheck HDE v2.4.0 HacksDen Edition by JoostinOnline, Double_A, R2-D2199, and Nano
    ...runs on IOS58 (rev 6176).

    Region: NTSC-U
    System Menu 4.3U (v513)

    Drive date: 09.07.2006
    Homebrew Channel 1.1.2 running on IOS58

    Hollywood v0x11
    Console ID: 38703127
    Console Type: Wii
    Shop Channel Country: United States (49)
    Boot2 v4
    Found 69 titles.
    Found 46 IOS on this console. 14 of them are stubs.

    IOS4 (rev 65280): Stub
    IOS9 (rev 1034): No Patches
    IOS10 (rev 768): Stub
    IOS11 (rev 256): Stub
    IOS12 (rev 526): No Patches
    IOS13 (rev 1032): No Patches
    IOS14 (rev 1032): No Patches
    IOS15 (rev 1032): No Patches
    IOS16 (rev 512): Stub
    IOS17 (rev 1032): No Patches
    IOS20 (rev 256): Stub
    IOS21 (rev 1039): No Patches
    IOS22 (rev 1294): No Patches
    IOS28 (rev 1807): No Patches
    IOS30 (rev 2816): Stub
    IOS31 (rev 3608): No Patches
    IOS33 (rev 3608): No Patches
    IOS34 (rev 3608): No Patches
    IOS35 (rev 3608): No Patches
    IOS36 (rev 3608): No Patches
    IOS37 (rev 5663): No Patches
    IOS38 (rev 4124): No Patches
    IOS40 (rev 3072): Stub
    IOS41 (rev 3607): No Patches
    IOS43 (rev 3607): No Patches
    IOS45 (rev 3607): No Patches
    IOS46 (rev 3607): No Patches
    IOS48 (rev 4124): No Patches
    IOS50 (rev 5120): Stub
    IOS51 (rev 4864): Stub
    IOS52 (rev 5888): Stub
    IOS53 (rev 5663): No Patches
    IOS55 (rev 5663): No Patches
    IOS56 (rev 5662): No Patches
    IOS57 (rev 5919): No Patches
    IOS58 (rev 6176): USB 2.0
    IOS60 (rev 6400): Stub
    IOS61 (rev 5662): No Patches
    IOS62 (rev 6430): No Patches
    IOS70 (rev 6912): Stub
    IOS80 (rev 6944): No Patches
    IOS222 (rev 65280): Stub
    IOS223 (rev 65280): Stub
    IOS249[56] (rev 65535, Info: d2x-v10beta52): Trucha Bug, NAND Access, USB 2.0
    IOS250[57] (rev 65535, Info: d2x-v10beta52): Trucha Bug, NAND Access, USB 2.0
    IOS254 (rev 65281): BootMii
    BC v6
    MIOS v10
    Report generated on 02/04/2019.

    The SHA-1 of my Gradius Rebirth (USA) (v257) wad is 88CD16F68C0A55FA0BE05FBD098E974C757E8E84.
    The SHA-1 of my Gradius Rebirth (USA) (original version) wad is DC93136AA47BA04D9303F776F1B0E492A85D59E7.

    I am also having problems getting World of Goo WiiWare to run from my emunand (either clOS or neek modes). Any recommendations? Thank you.
     
  2. bikerspade

    bikerspade Member
    Newcomer

    Joined:
    Jan 23, 2019
    Messages:
    19
    Country:
    United States
    I also tried installing wads LostWinds and Mega Man 9 wads thru USB Loader GX and same issue (black screen after running the game from either clOS emunand or neek).
     
  3. JeffJason

    JeffJason Member
    Newcomer

    Joined:
    Mar 14, 2017
    Messages:
    25
    Country:
    Can i play ntsc games on my softmodded pal console? And which websites you guys are using to find wii games? Cuz i cant find the games i looked for.
     
  4. Yan3

    Yan3 The guy nobody knows
    Member

    Joined:
    Aug 23, 2018
    Messages:
    154
    Country:
    Canada
    Yes, but you will need to force some options like force pal60, and we can’t talk about those kinda sites here it is a rule.
     
  5. JeffJason

    JeffJason Member
    Newcomer

    Joined:
    Mar 14, 2017
    Messages:
    25
    Country:
    I tried to play a ntsc game on my console and it actually worked pretty well. And i didnt do that force pal thing i guess. Is it possible without it?
     
  6. Yan3

    Yan3 The guy nobody knows
    Member

    Joined:
    Aug 23, 2018
    Messages:
    154
    Country:
    Canada
    It will not be the case with all games, some will work, some won’t.
     
  7. bikerspade

    bikerspade Member
    Newcomer

    Joined:
    Jan 23, 2019
    Messages:
    19
    Country:
    United States
    I tried installing the wad of Gradius ReBirth to my system nand and I was able to play it. Now I am curious if the game will run if I create a fresh emuNand dump and run the emuNand copy (and/or pack the wad from the fresh dump and then add it to my previous emunand).
     
  8. JeffJason

    JeffJason Member
    Newcomer

    Joined:
    Mar 14, 2017
    Messages:
    25
    Country:
    Ok thank you so much
     
    Yan3 likes this.
  9. scooby74029

    scooby74029 "fake coder"
    Member

    Joined:
    May 7, 2010
    Messages:
    1,271
    Country:
    United States
    bikerspade likes this.
  10. lone_wolf323

    lone_wolf323 GBAtemp Psycho!
    Member

    Joined:
    May 27, 2011
    Messages:
    3,929
    Country:
    Canada
    curious. did wii64 ever get gameshark support or is it as is?
     
  11. Deleted User

    Deleted User Newbie

    Just got a wii from goodwill for 10 bucks complete dont have an external hdd can I use usb stick to load games after hacking the wii? Can I also load gamecube games off usb? It's the model that has gamecube ports
     
    Last edited Feb 7, 2019
  12. jeannotte

    jeannotte GBAtemp Addict
    Member

    Joined:
    Jun 15, 2016
    Messages:
    2,886
    Country:
    France
    Hello

    @budtoka420

    Do not use USB keys, it works badly or not with the Wii .prefer an external hard drive in FAT32 for better connectivity (larger capacity)

    Yes, you can load Gamecube games and even on SD cards
     
    Deleted User likes this.
  13. bikerspade

    bikerspade Member
    Newcomer

    Joined:
    Jan 23, 2019
    Messages:
    19
    Country:
    United States
    I'm using a Sandisk Cruzer USB 2.0 stick and it's working without issues (my emunand and Wii wbfs files are playing fine from it). Paired with a 256gb SDXC card for Gamecube ISOs and Homebrew Channel apps.

    — Posts automatically merged - Please don't double post! —

    I redumped my system nand to a new emunand and I'm now able to play all WiiWare games I've install to the new emunand. Very happy everything is working now!
     
  14. ca032769

    ca032769 INFOCOM Collector
    Member

    Joined:
    Jan 11, 2012
    Messages:
    514
    Country:
    United States
    They can work, I've used them myself. But if/when issues arise the first problem will most likely turn out to be your flash drive. Sometimes they work, sometimes they don't, and sometimes they work for a bit and then just stop working (mostly due to the constant writing to the flash drive which has a limited lifespan).

    Around here using a flash drive is a crapshoot and generally not recommended due to the number of issues they cause. If your flash drives does work I'd use it only temporarily until you can get an external HDD setup for it. This will save you much grief.
     
    Last edited by ca032769, Feb 7, 2019
    Deleted User likes this.
  15. Deleted User

    Deleted User Newbie

    Thanks to all that answered will be using a usb stick till I can get an external hdd in closure. You all were very helpful
     
  16. CreamedCheese21

    Newcomer

    Joined:
    Feb 7, 2019
    Messages:
    2
    Country:
    United States
    Good afternoon. This is my first time ever hearing or using GBATemp but I was referred to here regarding a question about making my own AR Codes via Cheat Manager on Dolphin from a discussion board on Gamefaqs (Which I never used until now because this was always on my mind). I'll try to be brief. On Youtube, there's this user named CosmoCourtney who shared a guide video to making your own codes without really using anything for the most part in the least most convoluted fashion possible. It was rather straightforward and I was able to locate certain addresses I was looking for to create AR codes and using a certain program to help me create codes. However, I've came at an unfortunate snag at the end of it and I can't figure out why... I'm using a program called "GCNPCCv1.2" (I hope this is okay to address) Where you would take two addresses from your game by locating what you're searching for, dumping them, and following the instructions in order to create your finalized code (Disclaimer: I do not know anything about hex's and such yet I've somehow managed to find what I was looking for...). My problem was that the moment I inserted a Value to go with the Addresses, (I was looking for HP/Digivolution Bars off of Digimon Rumble Arena 2) it claims that "1.Bin was not found" Yet I made sure to rename them according to what was directed. This is really the only obstacle that's stopping me from finishing up the code I've created. For many years, I've been wanting to learn how to create codes and mess around with my box of old Gamecube games for a long time (Paper Mario TTYD forever) but it always required some kind of device, using the internet publicly or something from a program which I honestly couldn't afford to do, etc. With Cheat Manager, I was able to locate Addresses (Somewhat) and was able to create my own codes that would work but I had to make sure they were fully operable considering the Addresses change each time you start up again. Long story short, can someone please explain to me what I'm doing wrong? Apologies if this is rather long... I was wondering if posting this in the "Emulation" subject would be better but I came across this sticky and was wondering if this is acceptable. Thank you to anyone who took their time out of reading this.
     
  17. bikerspade

    bikerspade Member
    Newcomer

    Joined:
    Jan 23, 2019
    Messages:
    19
    Country:
    United States
    Which particular new external HDD would your recommend purchasing today?
     
  18. ca032769

    ca032769 INFOCOM Collector
    Member

    Joined:
    Jan 11, 2012
    Messages:
    514
    Country:
    United States
    MyBook
    I use Western Digital MyBooks, they come with an AC adapter. You can get the size you think you might need 1TB, 2TB, 3TB, 4TB, 6TB or 8TB. I used 4TB drives for a long time and am currently using an 8TB, but that takes a little extra to set up.

    I'd stick to a 4TB or under, it'll hold every Wii game, but not enough to also hold all GameCube games at the same time.

    I have a spare 10TB MyBook that I haven't tried yet, but would expect it to work as well. I've also been meaning to see how one of my 4TB Western Digital Passport drives with Y-Cable works, this way it could just sit on top of the Wii, but haven't gotten around to that yet either. I need to move the files off it and then play around to see how it works, maybe this weekend.
     
  19. bikerspade

    bikerspade Member
    Newcomer

    Joined:
    Jan 23, 2019
    Messages:
    19
    Country:
    United States
    Thanks, I'm very curious about the WD Passport with a y-cable for power, let me know how it works out.
     
  20. ca032769

    ca032769 INFOCOM Collector
    Member

    Joined:
    Jan 11, 2012
    Messages:
    514
    Country:
    United States
    Will do. Brought my white one in to work today so I could move the 2TB currently on it to another drive. Will format it afterwards and then try it out tonight to see how it works out.
     
    bikerspade likes this.
Draft saved Draft deleted
Loading...

Hide similar threads Similar threads with keywords - PARADISE,