Hacking Nintendont

[pedro702]

Does anyone know why if I load a game off of my usb, it doesn't work. It is always stuck at "INT usb/sd". It will load games off of my sd perfectly though!

your usb is not compatible with the current nintendont way of mounting devices i guess what is your usb? more than one partition?

 

[Kestrelio]

Hey guys, I really apologize for a dumb question. I've tried quite a bit to get Nintendont to recognize my controllers and have come up empty handed. I have a WiiU with the official GameCube Controller Adapter, black cable plugged into the bottom back, grey into the top back. I've switched between using a Wavebird and a standard GameCube controller. Nintendont is the latest version, and I downloaded the updated controllers from within the app. I've tried using controller.ini for the GameCube adapter, putting it in the root of the SD card. I've also tried without, as I read it's no longer necessary. I've also tried booting into Smash Wii U to load the controller, then going back to vWii and starting Nintendont from there; no luck. HID is enabled and my controllers do respond to the HID Test.

Any idea what I'm missing here? Thank you so much.

And I immediately figured it out after hours of fighting with it. HID was not enabled, the menu option below it was and apparently I need glasses.

 

[pedro702]

Hey guys, I really apologize for a dumb question. I've tried quite a bit to get Nintendont to recognize my controllers and have come up empty handed. I have a WiiU with the official GameCube Controller Adapter, black cable plugged into the bottom back, grey into the top back. I've switched between using a Wavebird and a standard GameCube controller. Nintendont is the latest version, and I downloaded the updated controllers from within the app. I've tried using controller.ini for the GameCube adapter, putting it in the root of the SD card. I've also tried without, as I read it's no longer necessary. I've also tried booting into Smash Wii U to load the controller, then going back to vWii and starting Nintendont from there; no luck. HID is enabled and my controllers do respond to the HID Test.

Any idea what I'm missing here? Thank you so much.

so what exatcly happens since you havent said what happened does nintendont say hid enabled done! and then ingame you cant do anything? what does it actualy say in the loading stuff?

are you using the correct ports on the adapter? just making sure with the wiiu logo on top its the port most on the left, you can also try to put the adapter in the front doors with both cables since they work now and no need to launch ssb4 at all anymore.

 

[Etheboss]

I like this thread so much.
It is what made me gbatemp addict.

It is just fantastic how nintendont progessed in past month

I say thank you to every single people who contributed to the project!

Hey, almost a 1000 pages, don't miss it..

 

[SugoiEndeavor]

your usb is not compatible with the current nintendont way of mounting devices i guess what is your usb? more than one partition?

Should I just try to format it to fat?

 

[TotalInsanity4]

Should I just try to format it to fat?

Yes, that would be good to try if you haven't already. Make sure you move everything off it first, though, so that nothing important gets erased! Make sure its Fat32, otherwise it wont work for GameCube games

 

[jinyung2]

how fast do the bluetooth controllers read?

 

[darkseekerliu]

how fast do the bluetooth controllers read?

They work pretty well. I haven't seen any difference when using HID, original gamecube controllers on Wii with gamecube ports or Bluetooth controllers (Wii U pro and Wiimote + classic controller pro).

 

[SugoiEndeavor]

Yes, that would be good to try if you haven't already. Make sure you move everything off it first, though, so that nothing important gets erased! Make sure its Fat32, otherwise it wont work for GameCube games

I checked and it is allready fat 32

 

[pedro702]

I checked and it is allready fat 32

if your using a wiiu if your hdd is not self powered you might need a y cable since wiiu usb ports are really underpowered.

 

[SugoiEndeavor]

if your using a wiiu if your hdd is not self powered you might need a y cable since wiiu usb ports are really underpowered.

I tried it on my original wii and wii u and I still get the error. It used to work perfectly with older versions of nintendont

 

[TotalInsanity4]

I tried it on my original wii and wii u and I still get the error. It used to work perfectly with older versions of nintendont

It may very well be due to Fix94 changing the USB loading to IOS 58 then

 

[SugoiEndeavor]

It may very well be due to Fix94 changing the USB loading to IOS 58 then

Do you know how I can fix it though?

 

[TotalInsanity4]

I honestly dont know (if its not relatively basic I cant personally help you )
However, you can post all of the information needed (Drive model, current version, last working version, etc.) and maybe someone else can help you.

 

[SugoiEndeavor]

I honestly dont know (if its not relatively basic I cant personally help you )
However, you can post all of the information needed (Drive model, current version, last working version, etc.) and maybe someone else can help you.

ok. My driver model is a "lexar jumpdrive s50 8gb" amazon page: "http://amzn.to/1viEwiL" I don't know what the last working version was, it is in fat 32 format.

 

[jinyung2]

They work pretty well. I haven't seen any difference when using HID, original gamecube controllers on Wii with gamecube ports or Bluetooth controllers (Wii U pro and Wiimote + classic controller pro).

I actually asked because I felt a bit of difference from using HID gamecube and bluetooth. I remember at one point the HID didn't read fast enough and there were some issues when playing games like smash but someone ended up making it read fast enough. Just asking to see if bluetooth reads just as fast and it's just me.

 

[FIX94]

bluetooth readings arent limited by anything compared to hid so technically they should be as fast as the controller can respond to us.

 

[jinyung2]

thanks for the super fast response fix94! i just wanted to make sure im the scrub and its not the fault of the controller

 

[nosignaldetected]

does anyone know if this adapter will work with nintendont:

http://www.amazon.co.uk/GameCube-Co...&keywords=gamecube+usb+adapter#productDetails

all of mayflash's other ones are recognised and work properly in HID test (I've tried the ones I own).

 

[Howard]

version 2.235 is up

-Fixed lack of responsiveness on HID controllers. This fixes the problem several of you were having trying to dash dance with the gamecube adapter for wii u