Hacking Nintendont

[Gamemaster1379]

they are just on the root of your sd card just delete them and then you will need to make a new one by either starting nintendont from a none autoboot channel like vwii and starting a random game on the sd card after changing the settings or just use the app on pc you used to make the settings before.

for nintendont forks i have no idea the official one the latest link is always on the OP

Got it. Yeah, deleted the config file, made a new one with Nintendont through Wii VC (fortunately I was smart enough to leave a single ISO to load against). That fixed it.

Thanks!

 

[Greenethic]

Hello,
I'm sorry if this question has already been asked, i couldn't find the awsner on google !

I play gamecube games injected in my WiiU. I would like to know if there is a way to start the games without having to turn a wiimote on.
I use a pro controller to start the system and lunch the games bus I must turn on the wiimote and point the screen to set "TV only or TV + gamepad)
I found that is was impossible to skip that.
But !
When the game shows up on the "quick start screen" when I boot the WiiU with the gamepad, the game lunches without having to use a Wiimote !
So I guess it must me somehow possible ?

Or is there a way to force a game to show up in "quick start screen" ?

Thanks.

 

[pedro702]

Hello,
I'm sorry if this question has already been asked, i couldn't find the awsner on google !

I play gamecube games injected in my WiiU. I would like to know if there is a way to start the games without having to turn a wiimote on.
I use a pro controller to start the system and lunch the games bus I must turn on the wiimote and point the screen to set "TV only or TV + gamepad)
I found that is was impossible to skip that.
But !
When the game shows up on the "quick start screen" when I boot the WiiU with the gamepad, the game lunches without having to use a Wiimote !
So I guess it must me somehow possible ?

Or is there a way to force a game to show up in "quick start screen" ?

Thanks.

you can use the wiiu gamepad to start the game without the wiimote but that is about it you can never start an inject with a wiiu pro controller only, its not nintendont codding but the way nintendo coded the wii injects.

 

[Clutz450]

Hello,
I'm sorry if this question has already been asked, i couldn't find the awsner on google !

I play gamecube games injected in my WiiU. I would like to know if there is a way to start the games without having to turn a wiimote on.
I use a pro controller to start the system and lunch the games bus I must turn on the wiimote and point the screen to set "TV only or TV + gamepad)
I found that is was impossible to skip that.
But !
When the game shows up on the "quick start screen" when I boot the WiiU with the gamepad, the game lunches without having to use a Wiimote !
So I guess it must me somehow possible ?

Or is there a way to force a game to show up in "quick start screen" ?

Thanks.

Assuming you have Aroma installed, there are a lot of cool things that can be done with plugins. Don't know if one exists that does what you want but I would recommend asking over in the Aroma thread. https://gbatemp.net/threads/release-aroma-environment-for-wii-u.618474/

 

[Greenethic]

So I found out I have tiramisu and not aroma.

While on aroma, this should be working to solve my "problem" ! WiiVCLaunch (available on the appstore)

 

[Clutz450]

So I found out I have tiramisu and not aroma.

While on aroma, this should be working to solve my "problem" ! WiiVCLaunch (available on the appstore)

Sounds promising. Let us know how you make out.

 

[mario-lucis-caelum]

Hi I'm playing gamecube games on the wii u gamepad but I'm noticing that the games are pretty blurry. is this just how it's supposed to look on the wii u gamepad?

 

[Nonstiq]

Hi I'm playing gamecube games on the wii u gamepad but I'm noticing that the games are pretty blurry. is this just how it's supposed to look on the wii u gamepad?

I run the evWii plugin on Aroma to remove any overscan so it's a 1:1 pixel ratio (for NTSC titles at least). Beyond that, I actually think the little bit of softness on the GamePad display actually makes these 480p games look better.

 

[ChibiMofo]

Hi I'm playing gamecube games on the wii u gamepad but I'm noticing that the games are pretty blurry. is this just how it's supposed to look on the wii u gamepad?

They should not look blurry if you are running them at 480p, which is what the GamePad runs at natively. (And no, blurry doesn't look better. It looks blurry.) Have you got Nintendont configured correctly to output your GC games at 480p?

 

[mario-lucis-caelum]

They should not look blurry if you are running them at 480p, which is what the GamePad runs at natively. (And no, blurry doesn't look better. It looks blurry.) Have you got Nintendont configured correctly to output your GC games at 480p?

It might be because I'm so used to running Gamecube games on Dolphin that 480p kinda looks blurry in my eyes.

Post automatically merged: Mar 25, 2024

I run the evWii plugin on Aroma to remove any overscan so it's a 1:1 pixel ratio (for NTSC titles at least). Beyond that, I actually think the little bit of softness on the GamePad display actually makes these 480p games look better.

I installed the plugin but I have no idea on how to configure it. There's just a bunch of random numbers in the settings. Also, how do I remove overscan?

 

[pedro702]

It might be because I'm so used to running Gamecube games on Dolphin that 480p kinda looks blurry in my eyes.

Post automatically merged: Mar 25, 2024

I installed the plugin but I have no idea on how to configure it. There's just a bunch of random numbers in the settings. Also, how do I remove overscan?

if your used to dolphin 1080p or even 4k then 480p will always look blurry to you...

 

[Ettino]

I'm so used to running Gamecube games on Dolphin

Wii U will never be able to match Dolphin's performance for both GC & Wii games. If you have a capable PC or Mac to run them at 4k, there's no point in using Wii U to run them. Heck even my phone can out perform the Wii U.

 

[Deleted member 663203]

I tried Geist EU today and it seems that the deflicker does not deactivate it after the screen that says "this game is only compatible at 60hz". I notice this because my TV screen flickers after that screen as if it were changing video mode and this causes the filter to reactivate again regardless of whether it force video mode.

 

[pedro702]

I tried Geist EU today and it seems that the deflicker does not deactivate it after the screen that says "this game is only compatible at 60hz". I notice this because my TV screen flickers after that screen as if it were changing video mode and this causes the filter to reactivate again regardless of whether it force video mode.

just use the usa version you have 480p and such to work with, forcing pal stuff with videomodes is always a gamble.

 

[ChibiMofo]

Wii U will never be able to match Dolphin's performance for both GC & Wii games. If you have a capable PC or Mac to run them at 4k, there's no point in using Wii U to run them. Heck even my phone can out perform the Wii U.

And Dolphin will never be as compatible as real hardware. I have a VERY capable PC (as a charter member of the PC Master Race) and yet I use my Wii and now my Wii U for all non-handheld Nintendo games. And I cannot imagine trying to run any of the games I play on a phone.

 

[Master-Killua]

I'm trying to use a dance mat (vWii) but it's not working. A gamecube controller is recognized, even in the Nintendont menu but when I plug in the dance mat, it doesn't work.
Any help?

 

[Donkusei]

just use the usa version you have 480p and such to work with, forcing pal stuff with videomodes is always a gamble.

Languages options is why people are still playing PAL games. But of course we also want the best image quality, as much as possible at least.

 

[mario-lucis-caelum]

Image 1 (Dolphin on my android tablet at 1080p)

Vs

Image 2 (Native Gamecube on the Wii U Gamepad)

Anyway to make the gamepad image as good as the other pic? Or slightly better? Why does it look like that?

 

[pedro702]

Image 1 (Dolphin on my android tablet at 1080p)

Vs

Image 2 (Native Gamecube on the Wii U Gamepad)

Anyway to make the gamepad image as good as the other pic? Or slightly better? Why does it look like that?

gc runs at 480p max on wii/wiiu there is no way to make it 1080p...

also dolphin is an emulator so it does a lot of image quality buffs you cant do on real hardware.

 

[XenoFredo]

Nintendont sometimes freezes the console completely (to the point I have to pull the plug) on startup from the Wii U menu (forwarder, either Nintendont itself or the game injects), usually the first time I boot it up after turning on the console. Then after rebooting it usually always boots up and works fine. Sometimes it will boot and I'll have weird artefacts instead of legible text in the Nintendont menu.

Could you please help me identify what may be causing this? I'm using the latest version of Nintendont. I'm currently on Tiramisu but planning to switch to Aroma. Maybe that will fix this problem?

Edit: For those who are interested and ran into similar issues, I managed to fix all black screen and freezing issues by using this version of Nintendon't. It shows the whole loading process when you launch an injected game, and though it is a bit slower, at least it never freezes: Google Nintendont-CrisMMMod and download it from Github.