1. lyokohack

    OP lyokohack Advanced Member
    Newcomer

    Joined:
    Apr 2, 2018
    Messages:
    73
    Country:
    France
    Hi everyone

    I bought a Nintendo switch bundle Pokemon Lets GO

    which is from this series "XAJ1 003745"

    and I have an 8GB storage card

    I heard that these switches are hackable so here is the Link



    is there any hope?
     
  2. LordKurisu

    LordKurisu Member
    Newcomer

    Joined:
    Dec 30, 2019
    Messages:
    21
    Country:
    United Kingdom
    unfortunately based on the part serial you posted your switch it patched and as of now not hackable :(
     
  3. pcwizard7

    pcwizard7 GBAtemp Advanced Fan
    Member

    Joined:
    Aug 2, 2013
    Messages:
    839
    Country:
    Australia
    there was some old stock in this bundle but very few and is impossible to find. splatoon 2 and Mario oddyyss bundle is a safe bet. but i found one by asking for serial numbers on ebay and check them here https://ismyswitchpatched.com/

    and don't bother asking ones with the new box design :)

    so u can return or sell and try again or wait and see if TX release their new hack which will be a hard mod method so u or modshop will need to mod the console it's up to u to decide
     
    Last edited by pcwizard7, Jan 3, 2020
  4. lyokohack
    This message by lyokohack has been removed from public view by linuxares, Jan 6, 2020, Reason: How about reading the rules.
    Jan 3, 2020 Show
  5. Hayato213

    Hayato213 GBAtemp Guru
    Member

    Joined:
    Dec 26, 2015
    Messages:
    6,903
    Country:
    United States
    Based on the serial #, the unit is patched, if you are above firmware 4.1.0 you are out of luck.
     
  6. lyokohack

    OP lyokohack Advanced Member
    Newcomer

    Joined:
    Apr 2, 2018
    Messages:
    73
    Country:
    France
    it's too bad

    can i update the console to play pokemen included without risk of the next hack coming out?
     
  7. Hayato213

    Hayato213 GBAtemp Guru
    Member

    Joined:
    Dec 26, 2015
    Messages:
    6,903
    Country:
    United States
    The issue over here is that you have a patched unit, beside you can't play online along with homebrew/cfw.
     
  8. pcwizard7

    pcwizard7 GBAtemp Advanced Fan
    Member

    Joined:
    Aug 2, 2013
    Messages:
    839
    Country:
    Australia
    there's no firmware requirement for the new hack that we know of so it's safe to update for that
     
    Last edited by pcwizard7, Jan 4, 2020
  9. lyokohack

    OP lyokohack Advanced Member
    Newcomer

    Joined:
    Apr 2, 2018
    Messages:
    73
    Country:
    France
    thanks for your support

    1- can I update my console without risk problem for the future hack?
     
  10. Draxzelex

    Draxzelex GBAtemp Legend
    Member

    Joined:
    Aug 6, 2017
    Messages:
    11,069
    Country:
    United States
    Historically lower firmware versions are more exploitable than higher ones which is updating the firmware is always frowned upon. Even if your console is not hackable on the firmware it is currently on, Deja Vu theoretically supports up to a firmware of 7.0.1. Past that, there is no guarantee but again lower firmware versions are just objectively better for hacking. So if you want the best chances at hacking your console, never update the firmware.

    But in all honesty, you should just trade your patched console for an unpatched one since you can hack any unpatched console now and forever.
     
  11. lyokohack

    OP lyokohack Advanced Member
    Newcomer

    Joined:
    Apr 2, 2018
    Messages:
    73
    Country:
    France
    thank you very much for this great advice

    1- I would like to know can I launch this game included in this bundle in another way? an idea ?

    2- give me the Links to find out or when has my switch is hacked?
     
  12. Draxzelex

    Draxzelex GBAtemp Legend
    Member

    Joined:
    Aug 6, 2017
    Messages:
    11,069
    Country:
    United States
    1. Buy an unpatched console
    2. It'll be front page news here at the very least
     
  13. MrMistopheles

    MrMistopheles Newbie
    Newcomer

    Joined:
    Nov 21, 2019
    Messages:
    8
    Country:
    United States
    I have a Let's Go Switch and it's currently running CFW off EmuMMC, so there are some that are hackable.

    Best thing to do is buy a jig and try to run a payload like biskeydump.
     
  14. lyokohack

    OP lyokohack Advanced Member
    Newcomer

    Joined:
    Apr 2, 2018
    Messages:
    73
    Country:
    France
    thanks for your support

    1- what is this biskeydump for?

    2-can you explain to me how to do it? and where to find these utility?
     
  15. MrMistopheles

    MrMistopheles Newbie
    Newcomer

    Joined:
    Nov 21, 2019
    Messages:
    8
    Country:
    United States
    I'm new so I can't post links but there are links to getting CFW installed on the forum. It's largely the same process. It either works or it doesn't. Biskeydump is one of the payloads you can send while in recovery mode. If it works, you can do CFW. If it won't, you can't. Doesn't harm your switch in any way.

    You'll need an RCM Jig, those are <$10 all day on various online markets.
     
  16. LordKurisu

    LordKurisu Member
    Newcomer

    Joined:
    Dec 30, 2019
    Messages:
    21
    Country:
    United Kingdom
    Definitely buy an RCM Jig or an RCM Loader with an included jig as this will make the process 100% easier
     
  17. pcwizard7

    pcwizard7 GBAtemp Advanced Fan
    Member

    Joined:
    Aug 2, 2013
    Messages:
    839
    Country:
    Australia
    u can use a paper clip and tegasmash gui to try and see if its hackable. i would only use this to test it only but u have very small chance it being unpatched, try to push any payload
    https://github.com/eliboa/TegraRcmGUI/releases

     
  18. lyokohack

    OP lyokohack Advanced Member
    Newcomer

    Joined:
    Apr 2, 2018
    Messages:
    73
    Country:
    France
    thank you all for your support

    I know this paperclip method that's what I want to use

    1- but does the 8GB SD card pose a problem?

    2- should I find the payload which is a little safe?
     
  19. LordKurisu

    LordKurisu Member
    Newcomer

    Joined:
    Dec 30, 2019
    Messages:
    21
    Country:
    United Kingdom
    For finding out if your switch will accept any payload the sd card size is irrelevant since all you want to do is put the switch into rcm mode and send a payload to it. if the payload shows on your switch then its hackable I believe, then you can move on to installing cfw etc
    check out the tutorials on gbatemp and you can't go to far wrong
     
  20. lyokohack

    OP lyokohack Advanced Member
    Newcomer

    Joined:
    Apr 2, 2018
    Messages:
    73
    Country:
    France
    Thanks for your help

    if i inject a bad payload does it have any risk for the console?
     
  21. LordKurisu

    LordKurisu Member
    Newcomer

    Joined:
    Dec 30, 2019
    Messages:
    21
    Country:
    United Kingdom
    that is a possibility so you should not inject payloads from just anywhere on the internet but the payloads found on this site should be safe just make sure to read up on everything before trying anything
     
Draft saved Draft deleted
Loading...

Hide similar threads Similar threads with keywords - Nintendo, Pokemon, switch