Hacking Nintendo switch Pokemon Let's GO Hack

[lyokohack]

Hi everyone

I bought a Nintendo switch bundle Pokemon Lets GO

which is from this series "XAJ1 003745"

and I have an 8GB storage card

I heard that these switches are hackable so here is the Link



is there any hope?

 

[LordKurisu]

unfortunately based on the part serial you posted your switch it patched and as of now not hackable

 

[pcwizard7]

there was some old stock in this bundle but very few and is impossible to find. splatoon 2 and Mario oddyyss bundle is a safe bet. but i found one by asking for serial numbers on ebay and check them here https://ismyswitchpatched.com/

and don't bother asking ones with the new box design

so u can return or sell and try again or wait and see if TX release their new hack which will be a hard mod method so u or modshop will need to mod the console it's up to u to decide

 

[Hayato213]

Based on the serial #, the unit is patched, if you are above firmware 4.1.0 you are out of luck.

 

[lyokohack]

it's too bad

can i update the console to play pokemen included without risk of the next hack coming out?

 

[Hayato213]

it's too bad

can i update the console to play pokemen included without risk of the next hack coming out?

The issue over here is that you have a patched unit, beside you can't play online along with homebrew/cfw.

 

[pcwizard7]

it's too bad

can i update the console to play pokemen included without risk of the next hack coming out?

there's no firmware requirement for the new hack that we know of so it's safe to update for that

 

[lyokohack]

thanks for your support

1- can I update my console without risk problem for the future hack?

 

[Draxzelex]

thanks for your support

1- can I update my console without risk problem for the future hack?

Historically lower firmware versions are more exploitable than higher ones which is updating the firmware is always frowned upon. Even if your console is not hackable on the firmware it is currently on, Deja Vu theoretically supports up to a firmware of 7.0.1. Past that, there is no guarantee but again lower firmware versions are just objectively better for hacking. So if you want the best chances at hacking your console, never update the firmware.

But in all honesty, you should just trade your patched console for an unpatched one since you can hack any unpatched console now and forever.

 

[lyokohack]

thank you very much for this great advice

1- I would like to know can I launch this game included in this bundle in another way? an idea ?

2- give me the Links to find out or when has my switch is hacked?

 

[Draxzelex]

thank you very much for this great advice

1- I would like to know can I launch this game included in this bundle in another way? an idea ?

2- give me the Links to find out or when has my switch is hacked?

1. Buy an unpatched console
2. It'll be front page news here at the very least

 

[MrMistopheles]

I have a Let's Go Switch and it's currently running CFW off EmuMMC, so there are some that are hackable.

Best thing to do is buy a jig and try to run a payload like biskeydump.

 

[lyokohack]

thanks for your support

I have a Let's Go Switch and it's currently running CFW off EmuMMC, so there are some that are hackable.

Best thing to do is buy a jig and try to run a payload like biskeydump.

1- what is this biskeydump for?

2-can you explain to me how to do it? and where to find these utility?

 

[MrMistopheles]

I'm new so I can't post links but there are links to getting CFW installed on the forum. It's largely the same process. It either works or it doesn't. Biskeydump is one of the payloads you can send while in recovery mode. If it works, you can do CFW. If it won't, you can't. Doesn't harm your switch in any way.

You'll need an RCM Jig, those are <$10 all day on various online markets.

 

[LordKurisu]

Definitely buy an RCM Jig or an RCM Loader with an included jig as this will make the process 100% easier

 

[pcwizard7]

u can use a paper clip and tegasmash gui to try and see if its hackable. i would only use this to test it only but u have very small chance it being unpatched, try to push any payload
https://github.com/eliboa/TegraRcmGUI/releases

 

[lyokohack]

thank you all for your support

I know this paperclip method that's what I want to use

1- but does the 8GB SD card pose a problem?

2- should I find the payload which is a little safe?

 

[LordKurisu]

For finding out if your switch will accept any payload the sd card size is irrelevant since all you want to do is put the switch into rcm mode and send a payload to it. if the payload shows on your switch then its hackable I believe, then you can move on to installing cfw etc
check out the tutorials on gbatemp and you can't go to far wrong

 

[lyokohack]

Thanks for your help

if i inject a bad payload does it have any risk for the console?

 

[LordKurisu]

that is a possibility so you should not inject payloads from just anywhere on the internet but the payloads found on this site should be safe just make sure to read up on everything before trying anything