Bonjour,
Par erreur, j'ai perdu l'astuce qui tient la nappe, et je ne sais pas comment faire, alors mon bouton d'accueil ne fonctionne plus.
Merci, si vous pouvez m'aider ^^
C'est mon traducteur qui a fait foiré x)FR:
(image peter ^^)
Et peut-etre tu aurais besoin d'un poste en anglish
ENG:
(broken picture's link)
And maybe you will need to do a post in english ^^
Yes, I could solderHmm... muy mala suerte.
Quizás puedas solucionarlo haciendo presión sobre el contacto, pero me parece que vas a tener que cambiar el conector por uno nuevo.
Tienes experiencia soldando? /s
PS: Speak English, please!
Here it is :Can someone who saw his original post give a better translation?
I think the picture "speaks for a thounsand words".Can someone who saw his original post give a better translation?
Yes, I'm saying exactly, and I'm looking for a solutionI think the picture "speaks for a thounsand words".
He has this connector that has a hat that presses down the flex cable.
The hat fell down, got broken, etc.
It is not uncommon for this to happen if you aren't careful.
Either try this, or try building up some layers of tape on top of a layer of paper in order to put pressure on the connector, someone else fixed a broken connector by doing that.I've had luck with hot glue, Put a small drop on the ribbon cable, wait two seconds, then press on the glue.
Pressing on the glue pushes the ribbon against the pins and spreads the glue at the same time, it hardens pretty quickly and can easily be removed with rubbing alcohol
Do you have a link for the cable on the picture? (With possibility of delivery in France)i believe that ribbon is one sided only, so you cant put pressure on the top.
the pressure trick only works if the top is not broken.
these n3ds sockets were a surprise
2 ways you can
solder the cable to the board.
or replace the socket
FR:
(image peter ^^)
Et peut-etre tu aurais besoin d'un poste en anglish
ENG:
(broken picture's link)
And maybe you will need to do a post in english ^^
Edit:
Post corrected so don't mind my original post
About missing part you could try to glue it if you do not happen to open it again OR
you can use "patafixe" I am unsure about english name, usually yellow and that easy to remove :
But use a really small portion!
Else you can try to find broken motherboard and take it from there but that will cost way more