Hacking RELEASE Latest FS and Acid Patches for Kosmos

[capsleepyy]

Looks like we need a new patch for atmo 14.1 now

Nope, the sigpatches Draxzelex shared in this thread work fine without any modification for Atmosphere 0.14.1, just tested it myself.

 

[Draxzelex]

That is weird considering I just updated my Atmosphere and the patches don't work. Anyway, here are the updated ES and loader/FS patches for Atmosphere's latest release, version 0.14.1, that are compatible with the latest firmware version of 10.1.0

 

[capsleepyy]

That is weird considering I just updated my Atmosphere and the patches don't work. Anyway, here are the updated ES and loader/FS patches for Atmosphere's latest release, version 0.14.1, that are compatible with the latest firmware version of 10.1.0

What didn't work? I was able to boot and load my gamecard dumps just fine with the 0.14.0 patches on 0.14.1 CFW. Even tested multiple reboots and I've had no problems.
Why would there be a need for new sigpatches if the Loader sysmodule wasn't changed anyway?

 

[Draxzelex]

What didn't work? I was able to boot and load my gamecard dumps just fine with the 0.14.0 patches on 0.14.1 CFW. Even tested multiple reboots and I've had no problems.
Why would there be a need for new sigpatches if the Loader sysmodule wasn't changed anyway?

The entire compiled binary will be slightly different than the previous release which will also change the offsets that the previous loader patch were affecting.

 

[capsleepyy]

The entire compiled binary will be slightly different than the previous release which will also change the offsets that the previous loader patch were affecting.

On closer inspection, homebrew NSP's (which I don't normally use) aren't loading though gamecard dumps are, if there's a reason for that I wouldn't know. New sigpatches fixed that, thanks.

*Snip*

 

[impeeza]

That is weird considering I just updated my Atmosphere and the patches don't work. Anyway, here are the updated ES and loader/FS patches for Atmosphere's latest release, version 0.14.1, that are compatible with the latest firmware version of 10.1.0

Hi, thanks for the quick patches, I just Update to Atmosphère 0.14.1 and this patches works like a charm, installed file via Goldleaf, (using Quark and NS-USBLoader. run my previous installed games.

 

[hiroakihsu]

*Snip*

@mikifantastik98 Hope I'm not asking for too much but do you think you can post a new combined patch with draxezelex's new patch for atmos 0.14.1? Thanks a ton!

 

[Draxzelex]

On closer inspection, homebrew NSP's (which I don't normally use) aren't loading though gamecard dumps are, if there's a reason for that I wouldn't know. New sigpatches fixed that, thanks.

The .NSP files that were working for you were due to the ES patches because ES has not changed since firmware 10.0.4. Homebrew .NSP files require FS patches in order to work which, as of firmware 10.0, have been relocated to the loader sysmodule. Since Atmosphere bundles its own loader sysmodule, every time there is a new Atmosphere release, there has to be a new loader patch.

 

[capsleepyy]

The .NSP files that were working for you were due to the ES patches because ES has not changed since firmware 10.0.4. Homebrew .NSP files require FS patches in order to work which, as of firmware 10.0, have been relocated to the loader sysmodule. Since Atmosphere bundles its own loader sysmodule, every time there is a new Atmosphere release, there has to be a new loader patch.

Don't gamecard dumps (xci's) use FS/Loader? I guess I'm mistaken but that explains it then.

 

[Draxzelex]

Don't gamecard dumps (xci's) use FS/Loader? I guess I'm mistaken but that explains it then.

Yes, any .XCI file dumps that are converted to .NSP format (or installed directly) require FS patches as well.

 

[Xyphoseos]

Atmosphere folder needs to be on the root of the SD, do you have it in another folder?

SD:\\atmosphere\...

 

[Hayato213]

SD:\\atmosphere\...

Make sure the Atmosphere folder isn't in another folder, it should be on the root of the SD, so example like E:\Atmosphere .

 

[OldGnashburg]

I can't get these patches working. Booting with fusee-primary Atmosphere 14.1 FW 10.0.4

 

[Lacius]

I can't get these patches working. Booting with fusee-primary Atmosphere 14.1 FW 10.0.4

Fusee primary patches are here:
https://gbatemp.net/threads/sigpatches-for-atmosphere-fusee-primary-only.567542/

 

[Xyphoseos]

Make sure the Atmosphere folder isn't in another folder, it should be on the root of the SD, so example like E:\Atmosphere .

I know, you can see on the picture (Opened with nxmtp)

 

[Hayato213]

I know, you can see on the picture (Opened with nxmtp)

https://gbatemp.net/threads/how-to-hekate-chainload-vanilla-atmos.563255/

Follow this and use the fusee sig patches that Lacius linked above.

 

[mikifantastik98]

complete fss0 Signature patches (FW10.1.0) ATM 0.14.1 ( TESTED )

 

[FocusedWiiWarrior]

What's the difference between your patches and the patches Drax posted??

 

[mikifantastik98]

What's the difference between your patches and the patches Drax posted??

they are complete and not just an update to add to the old patches
I combined the updated patches shared by @Draxzelex with the rest of the old patches

 

[Tyvar1]

That is weird considering I just updated my Atmosphere and the patches don't work. Anyway, here are the updated ES and loader/FS patches for Atmosphere's latest release, version 0.14.1, that are compatible with the latest firmware version of 10.1.0

complete fss0 Signature patches (FW10.1.0) ATM 0.14.1 ( TESTED )

Once again, thank you guys!!