If you get it to work but it locks up, you have to hold the power button until it turns off to reset it.
I read that before you wake up in the hut, don;t press A for at least 30 seconds and that will bypass the lockup/freeze
If you get it to work but it locks up, you have to hold the power button until it turns off to reset it.
New 3DS firmware - 9.2.0-20J
Front: LNA-CTR-AQEJ-JPN
Back: AQEJY10125
Working y/n - Yes
Got it. Thanks! Will report back soon with results.
Edit: Darn. Getting the same thing as you.
Well, got the save to show up and load!
Then it freezes up when pressing A
Almost there Thanks for your help
I forgot to apply the fix. Try it now.
You sir, are a gentleman and a scholar. Works!
https://www.dropbox.com/s/8kcczyij35go945/AQEE (Works First Time).sav
I'll leave it up for an hour, let me know when you have it.
This save got me further then the one posted on first page.
I can see the gateway save for first time. Do not get corrupt save finally! When I press A though I get frozen screen.
Did you wait 30 seconds before pressing A? Are you using the original microSD card inside the N3DS?
I read that before you wake up in the hut, don;t press A for at least 30 seconds and that will bypass the lockup/freeze
Just did a test where I put oot in the first slot. Still getting the freezing issue. I don't think the placement of the rom is causing any issue.
Just did a test where I put oot in the first slot. Still getting the freezing issue. I don't think the placement of the rom is causing any issue.
Btw, for those new to sky3ds, read this to understand how their convoluted save restore system works: http://blog.3dseu.com/the-official-tutorial-of-savedata-and-restore-backup-for-sky3ds-flashcart/
not quite yet. The only 3ds scene japanese OoT Rom was released by Bahamut unless someone knows something I don't. Right now I am waiting to see if this rom is even compatible. I have tried multiple times and tried downloading and redownloading on many sites so for right now I can say it does not work on Jap new3ds 8.1 at least
Did you delete the GATEWAY***** save from inside the game before you tried it again in the first position?
I tried this before and it would never show the save again until I added a another title and put it back in the 2nd position (or 3rd, or 4th, or...)
I have no idea why this is, but it works for me 100% of the time when I do it this way.
yes there is.Is a Eur save floating around??
I might need to get the save on the EEPROM before this will work properly.