PLEASE STOP ASK IF THIS METHOD WORKS ON X.X, CURRENTLY IT IS ONLY AVAILABLE BETWEEN 9.0 AND 9.2 (lower firmwares may be supported one day, but, without a new kernel exploit, there is no chances for 9.3+)
NEW 3DS METHOD
Its's very simple.
Launch NTR CFW on a New 3DS.
Enable the debugger.
Connect the debugger with the command : connect('your3dsip', 8000)
And now the magic command UPDATED (may not work on 8.1J) : write(0x10DD28, (0x00, 0x20, 0x08, 0x60, 0x70, 0x47), pid=0x25)
Done !
OLD 3DS METHOD
Download the code.bin
Copy it to the root of your SD card
Launch the web browser
Clear cookies and history
Go to loadcode.projectpokemon.org
Wait for the load bar and the message "failed to load" to disappear
Press Home
Done !
Do you want emuNAND support?
Of course... never.
We have two possibilities for emuNAND support :
-Gateway add support for patching NIM directly in their firmware
-You swap tickets, and install with a CIA.
Credits to yifanlu for the offset and the nop slide.
LIMITATIONS :
It's now stable.
Set your internet connection BEFORE and make sure it's valid.
Access the service you want after you see "finish" in the debugger.
Tested with :
-eShop
-eShop in games (update of Mii Plaza, DLCs, etc.)
-System Transfer (but the source and the target need to have a firmware in the compatiblity list) ---> a whole system transfer has been tested and it work!
-Theme Shop
TROUBLESHOOTING :
Question : The browser method doesn't work. What can I do?
Answer : Install the right version of the browser (see below).
Question : When I select my target 3DS in the System Transfer, it fails! What can I do?
Answer : Install the right version of CARDBROAD on BOTH 3DS (see below).
Compatibility list :
Browser versions :
CARDBROAD versions :
NEW 3DS METHOD
Its's very simple.
Launch NTR CFW on a New 3DS.
Enable the debugger.
Connect the debugger with the command : connect('your3dsip', 8000)
And now the magic command UPDATED (may not work on 8.1J) : write(0x10DD28, (0x00, 0x20, 0x08, 0x60, 0x70, 0x47), pid=0x25)
Done !
OLD 3DS METHOD
Download the code.bin
Copy it to the root of your SD card
Launch the web browser
Clear cookies and history
Go to loadcode.projectpokemon.org
Wait for the load bar and the message "failed to load" to disappear
Press Home
Done !
Do you want emuNAND support?
Of course... never.
We have two possibilities for emuNAND support :
-Gateway add support for patching NIM directly in their firmware
-You swap tickets, and install with a CIA.
Credits to yifanlu for the offset and the nop slide.
LIMITATIONS :
It's now stable.
Set your internet connection BEFORE and make sure it's valid.
Access the service you want after you see "finish" in the debugger.
Tested with :
-eShop
-eShop in games (update of Mii Plaza, DLCs, etc.)
-System Transfer (but the source and the target need to have a firmware in the compatiblity list) ---> a whole system transfer has been tested and it work!
-Theme Shop
TROUBLESHOOTING :
Question : The browser method doesn't work. What can I do?
Answer : Install the right version of the browser (see below).
Question : When I select my target 3DS in the System Transfer, it fails! What can I do?
Answer : Install the right version of CARDBROAD on BOTH 3DS (see below).
Compatibility list :
Source : 3.0 <---> Target : 3.0
Source : 4.0-4.5 <---> Target : 4.0-4.5
Source : 5.0-6.3 <---> Target : 5.0-6.3
Source : 7.0-8.1 <---> Target : 7.0-8.1
Source : 9.0-9.5 <---> Target : 9.0-9.5
Source : 9.6-9.7 <---> Target : 9.6-9.7
REMEMBER THAT THE EXPLOIT TO SPOOF FIRMWARE DOESN'T WORK ON HIGHER FIRMWARES THAN 9.2!
Source : 4.0-4.5 <---> Target : 4.0-4.5
Source : 5.0-6.3 <---> Target : 5.0-6.3
Source : 7.0-8.1 <---> Target : 7.0-8.1
Source : 9.0-9.5 <---> Target : 9.0-9.5
Source : 9.6-9.7 <---> Target : 9.6-9.7
REMEMBER THAT THE EXPLOIT TO SPOOF FIRMWARE DOESN'T WORK ON HIGHER FIRMWARES THAN 9.2!
Browser versions :
JAP Title ID : 0004003000008802
NA Title ID : 0004003000009402
EUR Title ID : 0004003000009D02
Firmware : 9.0-9.2 (the only compatible version for the moment) ---> Version : 4096
REMEMBER THAT THE EXPLOIT TO SPOOF FIRMWARE DOESN'T WORK ON HIGHER FIRMWARES THAN 9.2!
NA Title ID : 0004003000009402
EUR Title ID : 0004003000009D02
Firmware : 9.0-9.2 (the only compatible version for the moment) ---> Version : 4096
REMEMBER THAT THE EXPLOIT TO SPOOF FIRMWARE DOESN'T WORK ON HIGHER FIRMWARES THAN 9.2!
CARDBROAD versions :
JAP Title ID : 0004001000020A00
NA Title ID : 0004001000021A00
EUR Title ID : 0004001000022A00
Firmware : 9.0-9.2 (the only compatible version for the moment) ---> Version : 5130(JAP)/5131(EUR/NA)
REMEMBER THAT THE EXPLOIT TO SPOOF FIRMWARE DOESN'T WORK ON HIGHER FIRMWARES THAN 9.2!
NA Title ID : 0004001000021A00
EUR Title ID : 0004001000022A00
Firmware : 9.0-9.2 (the only compatible version for the moment) ---> Version : 5130(JAP)/5131(EUR/NA)
REMEMBER THAT THE EXPLOIT TO SPOOF FIRMWARE DOESN'T WORK ON HIGHER FIRMWARES THAN 9.2!