Tutorial [HOW-TO] Have a homemade Streetpass Relay

[Ceri]

So! Nzone stopped working abruptly after a year of being fine, throwing the by-now infamous msxml3.dll error, and updating didn't fix it, so I thought I'd give the VM version a try, but it's not working either; wlan0 simply doesn't show up! My adaptor is, as you can see, 0bda:8176, aka RTL8188CUS, which, at least theoretically, appears to fall under the supported rtl8192cu driver? But I'm a total novice at Debian! So, I've reached the end of my expertise! Help?

 

[rondoh70]

redirection unexpected syntax error with nzone ubuntu script. Any solutions?

 

[digipokemaster]

Ip 6 and ip4 is down again not sure how to fix this I have tried googling it not much help in that at least for what I'm looking for but oh well

 

[keyra]

we really need @duke_srg to popup

root@DD-WRT:~# wget -O /tmp/nzone.sh http://nintendozone.dynu.com/install; chmod
+x /tmp/nzone.sh; /tmp/nzone.sh BASE256,GBATEMP
-sh: /tmp/nzone.sh: not found

 

[duke_srg]

Looks like a bad luck, somehow addresses are regestered by ICANN to localhost. Moved to dynu.net with no problems, but I suppose that is not for long, so change it manually just to make sure that is no automated block.

 

[keyra]

finally got it working by changing back the routeur firmware to a 2015 old one
dunno why it worked with latest before

the script is now working but i'm not getting any pass
looks like it's not cycling beetween mac adresses

 

[Sahloknir]

So as someone who is quite new to DD-WRT firmware, is anybody able to tell me if a TP-Link MR3020

RAM 32 MB
FLASH 4 MB

has enough space to host a homepass script that changes the MAC lets say every 10 minutes?

 

[pirinto]

Hi http://nintendozone.dynu.com does not work. Are there any mirrors?

 

[keyra]

Hi http://nintendozone.dynu.com does not work. Are there any mirrors?

he changed to dynu.net

 

[Sahloknir]

I am always getting this error when attempting to run the auto-mac-cycling code on my TP-link MR3020 SVN revision 21061

/bin/sh: eval: line 3: /tmp/nzone.sh: not found

I have been trying for a good 2 hours to figure out a workaround for it, but everything i've tried gives the exact same error.

I have tried setting DNS to 8.8.8.8, as well as several variations of the command

 

[Merlinux]

Hi, I'm a new user. I had a 3ds (from the day1) but few months ago it broken, so now I have a new 3DS xl, but I have lost all the data of the StreetPass plaza... I had a lot of Miis, hats, costumes and puzzle :_(
Searching online I found this method to do "homepass".

I have first tryed the "Guide#2" in the section "Windows 7/8". It worked for the Nintendo Zone: I see it and it works if I enter in. The problem is that the StreetPass doesn't work. I left the 3ds in standby more than 5 minutes, but no green light.

I also have a machine with Ubuntu, so I tryed also the Method 1 (NEW) and Method 2 of the first post.

For the Method 1, I had an error when I do the command

sudo /tmp/nzone.sh BASE256,GBATEMP

the error is:

/tmp/nzone.sh: 1: /tmp/nzone.sh: Syntax error: redirection unexpected

For the Method 2, it works for creating the web "attwifi" (I also tryed to connect to it with smartphone, and it works, I can also go on Internet), but the 3ds doesn't see the Nintendo Zone.

Please, can someone help me?

My new3DSxl has the firmware 10.6.0-31E.

With the Method 2, after the command "iwconfig" I have this message:

wlan0     IEEE 802.11bgn  ESSID:"TP-LINK_8F68A1" 
          Mode:Managed  Frequency:2.412 GHz  Access Point: A0:F3:C1:8F:68:A1  
          Bit Rate=135 Mb/s   Tx-Power=20 dBm  
          Retry  long limit:7   RTS thr:off   Fragment thr:off
          Power Management:off
          Link Quality=70/70  Signal level=-36 dBm 
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:6  Invalid misc:140   Missed beacon:0

lo        no wireless extensions.

eth0      no wireless extensions.

wlan1     IEEE 802.11bgn  ESSID:off/any 
          Mode:Managed  Access Point: Not-Associated   Tx-Power=20 dBm  
          Retry  long limit:7   RTS thr=2347 B   Fragment thr:off
          Power Management:off

So I used this command to create the nzone:

sudo ./home_zone spoof1 wlan1 wlan0

Is it correct?

 

[pbanj]

finally got it working by changing back the routeur firmware to a 2015 old one
dunno why it worked with latest before

the script is now working but i'm not getting any pass
looks like it's not cycling beetween mac adresses

ya i finally got it working but its just like you said, no mac cycle. i got tagged once and thats it

 

[Kyrara]

if anyone have problems with the router that dont change the Mac addresses i have found a little fix ^^

after installing it with this command:
wget -O /tmp/nzone.sh http://nintendozone.dynu.net/install; chmod +x /tmp/nzone.sh; /tmp/nzone.sh BASE16,GBATEMP

the Startup script is wrong
it hase the old URL=http://nintendozone.dynu.com in it.
Change it to .net and reboot and now its working again ^^

Spoiler: Start Up

echo -e "#!/bin/sh\nWLINT=\$(nvram get wl0_ifname)\nWLMAC=\$(nvram get \${WLINT}_hwaddr)\nWLSSID=\$(nvram get \${WLINT}_ssid)\nJOBS=\$(nvram get cron_jobs)\nHOSTAPDCONF=/tmp/\${WLINT}_hostap.conf\nHOSTAPDPID=/var/run/\${WLINT}_hostapd.pid\nPS=\"ps\"\nURL=http://nintendozone.dynu.net?\nMACS=/tmp/\${0##*/}.macs\nSPDELAY=480\nMACNUM=0\nsetwl (){\n    ifconfig \$WLINT down hw ether \$1 up\n    sed -ri \"s/^(bssid=).*?/\\\\1\$1/;s/^(ssid=).*?/\\\\1\$2/\" \$HOSTAPDCONF\n    while ! hostapd -B -P \$HOSTAPDPID \$HOSTAPDCONF; do\n        PID=\$(\$PS | grep \$HOSTAPDPID | grep -v grep | sed 's/^ *//' | cut -d ' ' -f 1)\n        : \${PID:+\$(kill \$PID)}\n        sleep 1\n    done\n}\ncase \"\$1\" in\nstart)\n    echo starting \${0##*/}>&2\n    if [ -z \$2 ]; then\n        nvram set cron_jobs=\"\$(echo \"\$JOBS\" | sed -r s:#*\\(.*\$0.*\\):\\\\1:)\"\n    else\n        nvram set cron_jobs=\"\$(echo \"\$JOBS\" | grep -v \$1 | sed \"\\\$a* * * * * root \$0 \$2\")\"\n    fi\n;;\nstop)\n    echo stopping \${0##*/}>&2\n    setwl \$WLMAC \$WLSSID\n    nvram set cron_jobs=\"\$(echo \"\$JOBS\" | sed -r s:#*\\(.*\$0.*\\):#\\\\1:)\"\n;;\ntoggle)\n    if \$(\$0 status); then\n        \$0 stop\n    else\n        \$0 start\n    fi\n;;\nrestart)\n    \$0 stop\n    \$0 start\n;;\nreload|force-reload)\n    echo \${0##*/} MAC lists reloaded>&2\n    rm -f \$MACS\n;;\nstatus)\n    if \$(echo \"\$JOBS\" | grep \$0 | grep -qe '^#'); then\n        echo \${0##*/} is not running>&2\n        exit 1\n    else\n        echo \${0##*/} is running>&2\n        exit 0\n    fi\n;;\n*)\n    [ -f \$MACS ] && MACNUM=\$(grep -v ^x \$MACS | wc -l) && DELAY=\$(((\$(date +%s)-\$(date -r \$MACS +%s))/60))\n    [ \$MACNUM = 0 ] && NEWMACS=\$(wget -q -O - \$URL\$1)\n    [ \$(echo -n \"\$NEWMACS\" | wc -c) != 0 ] && echo \"\$NEWMACS\" > \$MACS && MACNUM=\$(cat \$MACS | wc -l)\n    [ \$MACNUM = 0 ] && sed -ri \"s/^x//\" \$MACS && MACNUM=\$(grep -v ^x \$MACS | wc -l)\n    MACTOTAL=\$(cat \$MACS | wc -l)\n    [ \$MACNUM = 0 ] || ([ \$MACTOTAL -lt \$SPDELAY ] && [ \${DELAY:-\$SPDELAY} -lt \$((\$SPDELAY/\$MACTOTAL)) ]) && exit\n    RANDOM=\$(head /dev/urandom | hexdump -d | head -n 1 | sed -r \"s/^([0-9]+ +0{0,4})+//\")\n    MAC=\$(grep -v ^x \$MACS | head -n \$((\$RANDOM%\${MACNUM}+1)) | tail -n 1)\n    sed -ri \"s/^\$MAC/x&/\" \$MACS\n    SSID=\$(echo \$MAC | cut -d , -f 2 -s)\n    MAC=\$(echo \$MAC | cut -d , -f 1)\n    : \${SSID:=\$WLSSID}\n    setwl \$MAC \$SSID\n;;\nesac\nstopservice cron\nstartservice cron\n" > /tmp/nzone; mkdir -p /tmp/etc/config; echo -e "#!/bin/sh\n/tmp/nzone toggle\n" > /tmp/etc/config/nzone.sesbutton; chmod +x /tmp/nzone /tmp/etc/config/nzone.sesbutton

 

[Sahloknir]

if anyone have problems with the router that dont change the Mac addresses i have found a little fix ^^

after installing it with this command:
wget -O /tmp/nzone.sh http://nintendozone.dynu.net/install; chmod +x /tmp/nzone.sh; /tmp/nzone.sh BASE16,GBATEMP

the Startup script is wrong
it hase the old URL=http://nintendozone.dynu.com in it.
Change it to .net and reboot and now its working again ^^

Spoiler: Start Up

echo -e "#!/bin/sh\nWLINT=\$(nvram get wl0_ifname)\nWLMAC=\$(nvram get \${WLINT}_hwaddr)\nWLSSID=\$(nvram get \${WLINT}_ssid)\nJOBS=\$(nvram get cron_jobs)\nHOSTAPDCONF=/tmp/\${WLINT}_hostap.conf\nHOSTAPDPID=/var/run/\${WLINT}_hostapd.pid\nPS=\"ps\"\nURL=http://nintendozone.dynu.net?\nMACS=/tmp/\${0##*/}.macs\nSPDELAY=480\nMACNUM=0\nsetwl (){\n    ifconfig \$WLINT down hw ether \$1 up\n    sed -ri \"s/^(bssid=).*?/\\\\1\$1/;s/^(ssid=).*?/\\\\1\$2/\" \$HOSTAPDCONF\n    while ! hostapd -B -P \$HOSTAPDPID \$HOSTAPDCONF; do\n        PID=\$(\$PS | grep \$HOSTAPDPID | grep -v grep | sed 's/^ *//' | cut -d ' ' -f 1)\n        : \${PID:+\$(kill \$PID)}\n        sleep 1\n    done\n}\ncase \"\$1\" in\nstart)\n    echo starting \${0##*/}>&2\n    if [ -z \$2 ]; then\n        nvram set cron_jobs=\"\$(echo \"\$JOBS\" | sed -r s:#*\\(.*\$0.*\\):\\\\1:)\"\n    else\n        nvram set cron_jobs=\"\$(echo \"\$JOBS\" | grep -v \$1 | sed \"\\\$a* * * * * root \$0 \$2\")\"\n    fi\n;;\nstop)\n    echo stopping \${0##*/}>&2\n    setwl \$WLMAC \$WLSSID\n    nvram set cron_jobs=\"\$(echo \"\$JOBS\" | sed -r s:#*\\(.*\$0.*\\):#\\\\1:)\"\n;;\ntoggle)\n    if \$(\$0 status); then\n        \$0 stop\n    else\n        \$0 start\n    fi\n;;\nrestart)\n    \$0 stop\n    \$0 start\n;;\nreload|force-reload)\n    echo \${0##*/} MAC lists reloaded>&2\n    rm -f \$MACS\n;;\nstatus)\n    if \$(echo \"\$JOBS\" | grep \$0 | grep -qe '^#'); then\n        echo \${0##*/} is not running>&2\n        exit 1\n    else\n        echo \${0##*/} is running>&2\n        exit 0\n    fi\n;;\n*)\n    [ -f \$MACS ] && MACNUM=\$(grep -v ^x \$MACS | wc -l) && DELAY=\$(((\$(date +%s)-\$(date -r \$MACS +%s))/60))\n    [ \$MACNUM = 0 ] && NEWMACS=\$(wget -q -O - \$URL\$1)\n    [ \$(echo -n \"\$NEWMACS\" | wc -c) != 0 ] && echo \"\$NEWMACS\" > \$MACS && MACNUM=\$(cat \$MACS | wc -l)\n    [ \$MACNUM = 0 ] && sed -ri \"s/^x//\" \$MACS && MACNUM=\$(grep -v ^x \$MACS | wc -l)\n    MACTOTAL=\$(cat \$MACS | wc -l)\n    [ \$MACNUM = 0 ] || ([ \$MACTOTAL -lt \$SPDELAY ] && [ \${DELAY:-\$SPDELAY} -lt \$((\$SPDELAY/\$MACTOTAL)) ]) && exit\n    RANDOM=\$(head /dev/urandom | hexdump -d | head -n 1 | sed -r \"s/^([0-9]+ +0{0,4})+//\")\n    MAC=\$(grep -v ^x \$MACS | head -n \$((\$RANDOM%\${MACNUM}+1)) | tail -n 1)\n    sed -ri \"s/^\$MAC/x&/\" \$MACS\n    SSID=\$(echo \$MAC | cut -d , -f 2 -s)\n    MAC=\$(echo \$MAC | cut -d , -f 1)\n    : \${SSID:=\$WLSSID}\n    setwl \$MAC \$SSID\n;;\nesac\nstopservice cron\nstartservice cron\n" > /tmp/nzone; mkdir -p /tmp/etc/config; echo -e "#!/bin/sh\n/tmp/nzone toggle\n" > /tmp/etc/config/nzone.sesbutton; chmod +x /tmp/nzone /tmp/etc/config/nzone.sesbutton

This did not work for me, i still get the same "not found" error.

 

[keyra]

if anyone have problems with the router that dont change the Mac addresses i have found a little fix ^^

after installing it with this command:
wget -O /tmp/nzone.sh http://nintendozone.dynu.net/install; chmod +x /tmp/nzone.sh; /tmp/nzone.sh BASE16,GBATEMP

the Startup script is wrong
it hase the old URL=http://nintendozone.dynu.com in it.
Change it to .net and reboot and now its working again ^^

Spoiler: Start Up

echo -e "#!/bin/sh\nWLINT=\$(nvram get wl0_ifname)\nWLMAC=\$(nvram get \${WLINT}_hwaddr)\nWLSSID=\$(nvram get \${WLINT}_ssid)\nJOBS=\$(nvram get cron_jobs)\nHOSTAPDCONF=/tmp/\${WLINT}_hostap.conf\nHOSTAPDPID=/var/run/\${WLINT}_hostapd.pid\nPS=\"ps\"\nURL=http://nintendozone.dynu.net?\nMACS=/tmp/\${0##*/}.macs\nSPDELAY=480\nMACNUM=0\nsetwl (){\n    ifconfig \$WLINT down hw ether \$1 up\n    sed -ri \"s/^(bssid=).*?/\\\\1\$1/;s/^(ssid=).*?/\\\\1\$2/\" \$HOSTAPDCONF\n    while ! hostapd -B -P \$HOSTAPDPID \$HOSTAPDCONF; do\n        PID=\$(\$PS | grep \$HOSTAPDPID | grep -v grep | sed 's/^ *//' | cut -d ' ' -f 1)\n        : \${PID:+\$(kill \$PID)}\n        sleep 1\n    done\n}\ncase \"\$1\" in\nstart)\n    echo starting \${0##*/}>&2\n    if [ -z \$2 ]; then\n        nvram set cron_jobs=\"\$(echo \"\$JOBS\" | sed -r s:#*\\(.*\$0.*\\):\\\\1:)\"\n    else\n        nvram set cron_jobs=\"\$(echo \"\$JOBS\" | grep -v \$1 | sed \"\\\$a* * * * * root \$0 \$2\")\"\n    fi\n;;\nstop)\n    echo stopping \${0##*/}>&2\n    setwl \$WLMAC \$WLSSID\n    nvram set cron_jobs=\"\$(echo \"\$JOBS\" | sed -r s:#*\\(.*\$0.*\\):#\\\\1:)\"\n;;\ntoggle)\n    if \$(\$0 status); then\n        \$0 stop\n    else\n        \$0 start\n    fi\n;;\nrestart)\n    \$0 stop\n    \$0 start\n;;\nreload|force-reload)\n    echo \${0##*/} MAC lists reloaded>&2\n    rm -f \$MACS\n;;\nstatus)\n    if \$(echo \"\$JOBS\" | grep \$0 | grep -qe '^#'); then\n        echo \${0##*/} is not running>&2\n        exit 1\n    else\n        echo \${0##*/} is running>&2\n        exit 0\n    fi\n;;\n*)\n    [ -f \$MACS ] && MACNUM=\$(grep -v ^x \$MACS | wc -l) && DELAY=\$(((\$(date +%s)-\$(date -r \$MACS +%s))/60))\n    [ \$MACNUM = 0 ] && NEWMACS=\$(wget -q -O - \$URL\$1)\n    [ \$(echo -n \"\$NEWMACS\" | wc -c) != 0 ] && echo \"\$NEWMACS\" > \$MACS && MACNUM=\$(cat \$MACS | wc -l)\n    [ \$MACNUM = 0 ] && sed -ri \"s/^x//\" \$MACS && MACNUM=\$(grep -v ^x \$MACS | wc -l)\n    MACTOTAL=\$(cat \$MACS | wc -l)\n    [ \$MACNUM = 0 ] || ([ \$MACTOTAL -lt \$SPDELAY ] && [ \${DELAY:-\$SPDELAY} -lt \$((\$SPDELAY/\$MACTOTAL)) ]) && exit\n    RANDOM=\$(head /dev/urandom | hexdump -d | head -n 1 | sed -r \"s/^([0-9]+ +0{0,4})+//\")\n    MAC=\$(grep -v ^x \$MACS | head -n \$((\$RANDOM%\${MACNUM}+1)) | tail -n 1)\n    sed -ri \"s/^\$MAC/x&/\" \$MACS\n    SSID=\$(echo \$MAC | cut -d , -f 2 -s)\n    MAC=\$(echo \$MAC | cut -d , -f 1)\n    : \${SSID:=\$WLSSID}\n    setwl \$MAC \$SSID\n;;\nesac\nstopservice cron\nstartservice cron\n" > /tmp/nzone; mkdir -p /tmp/etc/config; echo -e "#!/bin/sh\n/tmp/nzone toggle\n" > /tmp/etc/config/nzone.sesbutton; chmod +x /tmp/nzone /tmp/etc/config/nzone.sesbutton

geez how could i overlook that!

 

[srwgin]

http://nintendozone.dynu.net/install
ERR_CONNECTION_RESET
wow ToT

 

[keyra]

http://nintendozone.dynu.net/install
ERR_CONNECTION_RESET
wow ToT

when i click this link it dl a nzone.exe so what?

 

[pbanj]

@duke_srg im still not having any luck. when i open the script that it puts on my router its a jumbled mess

here is some of it

Spoiler

#!/bin/sh
tail -n+3 $0 | tar -xzC /tmp; /tmp/nzone-install/install $@; exit
‹ í={Ú¸²ù
Õ¸-$5¶üÜ%?º‡†ô4ç´!7$7{·4ýl‚OÁvmÚMòÝïH²!Ðf÷³ÍÚy€¥±^óÐÌh$»¿{®-:nõF#ik-——)ËôS¾ûI¿cÅPLC×MSÝ’±¦ëòÒ·r¸&Ðó ¡ž5vÜoÀÑ|'Œ‚^äáÖc¹Ü9ü·^í½+kÁ¿i~ÿš‚uU7dðoÈ2ÞBJ«yüð)ð¿ÿô®ÚáÅ$Š<÷!ñ¯ë«ñ¯j€ÕP,«2áÓPÿå‚ÿ×~•ŸHŽ+…CNŠÆ># y——#›Û*®GÍóÿiys.aqCÓVò?Ö1‘ÿº¡²f ÖeE-ø?«Úñ¡t^¹CÇjTkÛ¿H],`i—$Î¥)„7íÎIó¨µ×>|Í•†Œ …¼BâQšwtК‡+XíGÐÿ@áRÖÃÿ†±’ÿ“êØÄšiÐù_Wàÿ\øß ÷Hü
ú°‹¢¡ír¥’{ôÆ(´#Ô<÷㼋°Á»?ô/ü«ýªÃ£ÄD
ëåín¥¶-ȵínµÞíâz•çJö(´ï]Ôe`ûH¼BŽËå»Bo%?çEH¡‘<)zàâdmö_ëÁ%À}í?M3T¬Äþ€ØÄU
þÏ
ÿ>Ìåâ0ÛÃãÿ[öŸ"ÇöŸl*DOĆ&ë…üÏ×þ#âÙ*äêßZþŸ•µMØ2µÿL€``ö_áÿÉGÿ›Žè áìíÁá "¦^ª}%Œ”.
Ú
8š)<z)Yö•äNF£B`<>ýÏXÿß[ÿ£ë?h‰þgüŸ+þË8wùoè±ý¯b]“‰üW±RÈÿ<.*÷B…™é—`¦OGòGgàöÆv•;{û®¹w'w8íYV@r;ƒÖl2MT9bÙÏe¥æµ˜3þÊüÿjSö¿*›šªézaÿoÿöïbhG
øÿ–ý¯™©ý¯Ê

i thought it might be the fw on my router so i downgraded it and it does the same thing. its a wnr2000v2 on ddwrt and i use to use it for this a while ago.

if i make a script containing what was posted a few posts back it gives me perm denied no matter what i set the files perms to and on reboot its wiped

the current fw that is on it is this one DD-WRT v24-sp2 (12/24/10) but i have tried it with a newer one and got the same thing

 

[duke_srg]

@duke_srg im still not having any luck. when i open the script that it puts on my router its a jumbled mess

here is some of it

You don't need to open it, it is an installation script with TAR archive inside. You need to make it runable and execute, read the menual carefully.

 

[keyra]

i can confirm that it works, 196 streetpass yesterday on bravely second