Tutorial [HOW-TO] Have a homemade Streetpass Relay

[CydoniaDS]

Hmmm. Followed the Linux method on Debian Wheezy pretty much exactly, using the rt73usb driver, and my 3ds sees a Nintendo Zone, but then fails to connect.

root@steamos:/home/desktop/Documents/Nintzone# ./nintzone.sh neocrux wlan0 eth0
/tmp/tmp.NaXvvNH0gh/nztmp
Starting Nintendo Zone Hotspot, using config ''Provided by neocrux''
SSID: _The Cloud
Country: US
root@steamos:/home/desktop/Documents/Nintzone# ifconfig
eth0      Link encap:Ethernet  HWaddr 00:1e:8c:86:55:3c 
          inet addr:192.168.1.76  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::21e:8cff:fe86:553c/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:12717529 errors:0 dropped:0 overruns:0 frame:0
          TX packets:11664496 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:10103350472 (9.4 GiB)  TX bytes:6074149931 (5.6 GiB)
 
lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:60569 errors:0 dropped:0 overruns:0 frame:0
          TX packets:60569 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:7968675 (7.5 MiB)  TX bytes:7968675 (7.5 MiB)
 
mon.wlan0 Link encap:UNSPEC  HWaddr 00-0E-2E-CD-76-12-00-38-00-00-00-00-00-00-00-00 
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:98 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:15646 (15.2 KiB)  TX bytes:0 (0.0 B)
 
wlan0    Link encap:Ethernet  HWaddr 00:eb:2d:d8:62:aa 
          inet addr:192.168.23.1  Bcast:192.168.23.255  Mask:255.255.255.0
          inet6 addr: fe80::2eb:2dff:fed8:62aa/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:388 errors:0 dropped:0 overruns:0 frame:0
          TX packets:714 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:56035 (54.7 KiB)  TX bytes:146807 (143.3 KiB)

I can see that the MAC address is being changed correctly on

wlan0

, so I'm at a loss as to what the problem is.

 

[Phasair]

I set everything up, and was able to connect to attwifi on my 3ds. I put it into sleep mode for a few minutes, and when I woke it up there was a green 'streetpass' notification in the top left of my screen. Yet when I check any of my games, or mii plaza, there is nothing there to indicate I got a streetpass. Am I doing something wrong? I am seeing a nintendo zone by the way, and cannot connect to it, but I thought that was normal.

The streetpasses also aren't showing in the notifications. Basically nowhere, even though I've set the attwifi network up and was able to connect to it.

I am using the windows method by the way.

 

[RupeeClock]

I tried so many methods to get this working, my router, my android phone, my laptop running windows, but I finally got it working with my laptop running Ubuntu.
I've been using this to get a ton of ACNL hits! With a bit of patience, setting up multiple spoofed macs with this list, I'll be able to get the hundreds of streetpass hits I need to get that infamous gold badge!

 

[paradalakuwawa]

folks i need your help!
I read every single page and i tried everything but nothing worked for me.
I bought a Router: d-link dir-615 and uploaded that dd-wrt firmware for my router. I got this version!

Now..first i did those settings:


yes....i´m getting 6 meetings every 8 hours. But i bought this router to use the cycle to get tons of miis.
That does not work for me !!!
My settings!! (and i tried everything)

i always waited a day to see the resaults....no cyrcling, no more miis.....and now.....before i start crying again ...please....HELP ;/

P.S: 3DS is connected....getting Nintendo zone is blinking....

 

[keyra]

here it should look like this

 

[MonoAlpha]

Hey guys I could use your help. I'm using the Windows 7 guide and I've found that when I spoof my wireless adapter, it does not spoof the 'attwifi' correctly. When I check the status of 'attwifi', the MAC is still the original however when I check my android device, it says that 'attwifi' is spoofed but I can't connect to 'attwifi' unless the MAC on both the wireless adapter and 'attwifi' are the same.

Any help would be appreciated.

 

[paradalakuwawa]

here it should look like this

thanks......so you typed "wget -O /tmp/nzone.sh http://goo.gl/XBMJK9; chmod +x /tmp/nzone.sh; /tmp/nzone.sh" into commands and press the run command button. After that just changed to 256???
I did that but i´m not getting any streetpasses

 

[keyra]

yup that's the command i used

 

[RupeeClock]

Not sure how anyone might feel about this, but I decided to try and turn the Linux HomePass method into an image guide, and explain it the way that I got it to work and in more layman's terms.
http://imgur.com/U92EU16

I dunno, does this work for you? Is there something I should change, correct?

 

[dicamarques]

Not sure how anyone might feel about this, but I decided to try and turn the Linux HomePass method into an image guide, and explain it the way that I got it to work and in more layman's terms.
http://imgur.com/U92EU16

I dunno, does this work for you? Is there something I should change, correct?

Nice, but the disadvantage of images is that theres no copy and paste, and error can occur

 

[paradalakuwawa]

yup that's the command i used

btw...did u also enable or disable you mac adress clone???

 

[Sliter]

hey, I'm starting an "home zone" for street pass meeting, with a friend, we are using a D-link wireless router, the nintendo zone worked, but we want to share it on the homepass list but I'm not sure which mac to use, the router give us 3 mas addresses, the Lan, Wan and wireless, wich one should we share there?

 

[RupeeClock]

Nice, but the disadvantage of images is that theres no copy and paste, and error can occur

Definitely true there, I do link to the GBAtemp thread a couple of times so you can retrieve what you need to copy/paste, but manually typing that much text can be prone to error.
An image does have the advantage of being a single compiled reference to keep.

By the way, thanks to HomePass I was finally able to get that infamous StreetPass Master badge in ACNL, thanks!
https://miiverse.nintendo.net/posts/AYQHAAABAAABUaW7oegWaw

 

[keyra]

btw...did u also enable or disable you mac adress clone???

no adress clone for me, u don't need it since it cycles

 

[paradalakuwawa]

no adress clone for me, u don't need it since it cycles

ok....
i tried everything and cycling does not work
all settings are perfect....so frustrating

 

[keyra]

ok....
i tried everything and cycling does not work
all settings are perfect....so frustrating

internet ok on 3ds?

 

[paradalakuwawa]

internet ok on 3ds?

it´s connected....i just bought a game from the eShop

 

[Sliter]

hey, I'm starting an "home zone" for street pass meeting, with a friend, we are using a D-link wireless router, the nintendo zone worked, but we want to share it on the homepass list but I'm not sure which mac to use, the router give us 3 mas addresses, the Lan, Wan and wireless, wich one should we share there?

Somone help me here please? .3.

 

[dicamarques]

Somone help me here please? .3.

Wireless

 

[pBullet]

So, a problem I'm having with the Windows set up:

I am using MACycle to cycle through mac addresses. I have two connections: Ethernet, and Wi-Fi. I ran command prompt to allow the virtual port and I created a connection called "attwifi" with a password.

Now, I streetpassed fine. When I turn off the virtual network and change my mac address, on recreating the virtual network, sometimes the shared connection with Ethernet is lost. Even though the option is checked under the Eternet share tab to be shared with attwifi, it isn't. It's quickly fixed if I go into the settings, turn it off, then turn it back on.

It's mostly a problem when I'm cycling through macs as the process is automated and I'm not at my machine to correct it. It would just be nice if anyone knew what the problem could be.

If it helps, I am using Windows 8.1.