Homebrew RELEASE hekate-ipl-4.x - HBL on 4.x

[DaveLister]

We should start a compatibility for anything that works on 4.x.

Running for me on 4.1.0 -
FBPA ran metal slug, Dark Seal/AKA Gate of Doom - few other roms - full sound and control,
Scummvm - booted Monkey island II but cannot control code wheel entries for copy protection needs keyboard, attempted to boot Space Quest 4 - needs tweaking.
Snesemulator from Switchbru site - not running or booting
FTPD - works
All the nand backups and user sys keys pulled from the hekate implementation checked ok .
Flashback
Zelda DX Solarus


Thats my lot - supposed to be working ........ Im at work. Ahem ..

 

[AileenLumina]

PyNX works, too

 

[Mach]

We should start a compatibility for anything that works on 4.x.

Do you have a 4.1.0 homebrew compatible list ?

 

[YoRHa]

Change “Switch” to “switch” and try it.

still, rename it doesn't work

 

[Bedel]

still, rename it doesn't work

If you are using windows, you won't be able to replace the first letter with a mayus nor minus. You have to put another letter as the first, change the name, and then put the name you first wanted.

 

[YoRHa]

guys this is the third time. my switch turned off and won't turn on even if i charge it.
i was running on CFW then i press the power button to let my switch went to sleepMod after that i press the power button and no signs.. my switch won't turn on. what should i do ?

 

[cdhoff]

guys this is the third time. my switch turned off and won't power on even if i charge it.
i was running on CFW then i press the power button the let my switch went to sleepMod after that i press the power button and no signs.. my switch won't turn on. what should i do ?

Hold down power for 10 seconds, release, and turn the switch on.

 

[DaveLister]

guys this is the third time. my switch turned off and won't power on even if i charge it.
i was running on CFW then i press the power button the let my switch went to sleepMod after that i press the power button and no signs.. my switch won't turn on. what should i do ?

This CFW does not support wake from sleep - what you are seeing is expected. just power off with full 12 seconds power button press . Atmosphere official will support this possibly in 2 weeks..... or more ...

 

[AileenLumina]

Sleep mode does NOT work. If your device is in sleep mode, turn it off by holding the on/off button for ten seconds, then launch hekate again.

 

[Rob Blou]

guys this is the third time. my switch turned off and won't power on even if i charge it.
i was running on CFW then i press the power button the let my switch went to sleepMod after that i press the power button and no signs.. my switch won't turn on. what should i do ?

Sleep mode doesn't work with the current CFW in hekate ... just hold the power button for 10 sec and restart ... next time don't put it in sleep mode but turn it off

 

[senas8]

Do you have a 4.1.0 homebrew compatible list ?

I’m on 4.1. I don’t have a comp. List I wanted us to start making one just like there is one for 5.x etc

 

[DaveLister]

I’m on 4.1. I don’t have a comp. List I wanted us to start making one just like there is one for 5.x etc

can you do an editable topic here ? Wikki maybe ?

 

[YoRHa]

Hold down power for 10 seconds, release, and turn the switch on.

This CFW does not support wake from sleep - what you are seeing is expected. just power off with full 12 seconds power button press . Atmosphere official will support this possibly in 2 weeks..... or more ...

Sleep mode does NOT work. If your device is in sleep mode, turn it off by holding the on/off button for ten seconds, then launch hekate again.

Sleep mode doesn't work with the current CFW in hekate ... just hold the power button for 10 sec and restart ... next time don't put it in sleep mode but turn it off

thank u guys i really appreciate your help.
it works, thanks.
sorry for being annoying and too noob.

 

[notimp]

Scummvm - booted Monkey island II but cannot control code wheel entries for copy protection needs keyboard, attempted to boot

User error. Press - (minus) to open up the virtual keyboard. Enter any numbers. Continue.

 

[DaveLister]

User error. Press - (minus) to open up the virtual keyboard. Enter any numbers. Continue.

Cheers never used Scummvm before was rushing over surfaces . My bad.

 

[Bedel]

Sleep mode does NOT work. If your device is in sleep mode, turn it off by holding the on/off button for ten seconds, then launch hekate again.

Maybe you should put it in the main post. This things are important, and people will ask again.

 

[YoRHa]

Maybe you should put it in the main post. This things are important, and people will ask again.

yeah :")

 

[Maximilious]

guys this is the third time. my switch turned off and won't power on even if i charge it.
i was running on CFW then i press the power button the let my switch went to sleepMod after that i press the power button and no signs.. my switch won't turn on. what should i do ?

This is not complete code. Just remember that. If you keep hitting this issue perhaps you should wait for official release. Same goes for anyone else hitting bugs/issues.

 

[Hondyn]

guys this is the third time. my switch turned off and won't power on even if i charge it.
i was running on CFW then i press the power button the let my switch went to sleepMod after that i press the power button and no signs.. my switch won't turn on. what should i do ?

Theres yet no support for sleeping mode so if you wanna keep using it, you shouldnt put the device to sleep. On top of that, i ve seen you saying you cant boot your switch after having this in sleeping mode, right? Just hold the power buttom for 10 seconds, release it and hit it once more as if you were about to turn it on. It will turn your switch back on normally

 

[HesiPullupJimbo]

I have been trying to run this but hit some roadblocks. I 3d printed the fail0verflow jig made for the usb connector, but can't figure out how to actually get the connector out of the usb to put in the jig. Are there any video tutorials on it?