Hacking Get Ready For CFW Nintendo Switch: Fusée Gelée (ALL FIRMWARE)

[Masterwin]

What do I need to use Fusée Gelée? Does this vary between firmware versions? Between hardware revisions?

Fusée Gelée has roughly the same modes of operation on all currenthardware revisions, no matter the firmware version.

Here's a rough list of things that you might want to have on hand come release:

• The normal things you use to play with your Switch-- you know, your Switch, some Joycons.
• A nicely-sized microSD card. I can't yet tell you for sure what size or speed-class you should get at the moment, but I wouldn't go smaller than 64GiB.
• A USB A-to-C cable-- like the one that comes with the Pro Controller. One of the first payloads you'll want to run with Fusée Gelée is my "mass storage" payload, which will allow you to mount your Switch's internal memory and backup your NAND. This will prevent any further mishaps, and should be considered mandatory.
• A tri-wing screwdriver set that other people attest works on the Switch. This isn't a mandatory component in some cases, but if you decide you want to e.g. go the 'easy hard-mod' option, you'll likely want to have this on hand.

SOURCE: http://www.ktemkin.com/faq-fusee-gelee/

 

[DarthDub]

Your Tri-wing screw driver line is repeated twice.
Edit: Thanks for fixing it.

 

[leon315]

my 200gb sandisk SD is ready!

 

[yardie]

Already got my 200gb ready for this
Interesting times ahead

 

[wsdyleon]

the cfw has been completed?

 

[CMDreamer]

the cfw has been completed?

You need to define "completed". And even then you will not get a real answer.

 

[BlastedGuy9905]

What do I need to use Fusée Gelée? Does this vary between firmware versions? Between hardware revisions?

Fusée Gelée has roughly the same modes of operation on all currenthardware revisions, no matter the firmware version.

Here's a rough list of things that you might want to have on hand come release:

• The normal things you use to play with your Switch-- you know, your Switch, some Joycons.
• A nicely-sized microSD card. I can't yet tell you for sure what size or speed-class you should get at the moment, but I wouldn't go smaller than 64GiB.
• A USB A-to-C cable-- like the one that comes with the Pro Controller. One of the first payloads you'll want to run with Fusée Gelée is my "mass storage" payload, which will allow you to mount your Switch's internal memory and backup your NAND. This will prevent any further mishaps, and should be considered mandatory.
• A tri-wing screwdriver set that other people attest works on the Switch. This isn't a mandatory component in some cases, but if you decide you want to e.g. go the 'easy hard-mod' option, you'll likely want to have this on hand.

SOURCE: http://www.ktemkin.com/faq-fusee-gelee/

I literally have a 64GB SD card. And a Pro Controller charging cable. My dad probably also has a tri-wing.
I hope it doesn't matter that... I've got all of my games... on my SD Card... *exits room*

EDIT: OH GOD WHY

EDIT-2: I've archived some of my games. Now I've got 7GB of storage left. Is that enough?

 

[KanterZ]

Let's go baby!

 

[delete12345]

I hoped the tri-wing screwdrivers is optional.

 

[KanterZ]

I hoped the tri-wing screwdrivers is optional.

unfortunately, the Switch uses tri-wings.

 

[delete12345]

unfortunately, the Switch uses tri-wings.

I mean, yes I know about that. I just don't want to do anything with the Switch using that tool for CFW.

 

[naddel81]

so we need a tri-wing or is it optional for CFW install?

 

[yardie]

so we need a tri-wing or is it optional for CFW install?

Did you read the op
It's literally written that it's not mandatory

 

[naddel81]

Did you read the op
It's literally written that it's not mandatory

I know, but what is meant by going all-in?! "easy hard mod" compared to "no hard mod"? why would I do easy hardmodding when I don't have to?

 

[Risingdawn]

I know, but what is meant by going all-in?! "easy hard mod" compared to "no hard mod"? why would I do easy hardmodding when I don't have to?

Maybe for cold boot, who knows. Just wait

 

[andijames]

I know, but what is meant by going all-in?! "easy hard mod" compared to "no hard mod"? why would I do easy hardmodding when I don't have to?

Again it says it's not mandatory. That means you don't HAVE to do this.

 

[Giga_Gaia]

• A tri-wing screwdriver set that other people attest works on the Switch. This isn't a mandatory component in some cases, but if you decide you want to e.g. go the 'easy hard-mod' option, you'll likely want to have this on hand.

I assume this is really not necessary because you don't have to open the console in anyway.

I just ordered a 128GB card from amazon to prepare for this.

 

[RedHunter]

Damn, wish I could use my 32gb cards, oh well...
Also would be nice to know the pros of the solder version, or if it have any at all.

There is any thread about the best micro sd cards for the Switch? Is this one good? https://www.amazon.com/gp/aw/d/B06X...=Micro+128&dpPl=1&dpID=41DjrCg73gL&ref=plSrch

 

[Xandroz]

Click baited

 

[Nincompoopdo]

Sigh... Nintendo will only make Labo games from now on, no one can pirate cardboard.