Freezing at black screen using USB Loader GX.

Discussion in 'Wii - Backup Loaders' started by Swedguy97, Jan 23, 2015.

  1. Swedguy97
    OP

    Swedguy97 Member

    Newcomer
    20
    0
    Jan 23, 2015
    Hello everyone.

    Whenever I try to load up a game using both USB Loader GX and Configurable USB Loader, my Wii freezes after both apps have loaded the game. To go in dept, my screen is black and my Wii Remote shuts down and I have to manually shut down my Wii.

    Here is my sys check;

    Warning: Spoilers inside!
     


  2. Cyan

    Cyan GBATemp's lurking knight

    Global Moderator
    18,308
    8,767
    Oct 27, 2002
    France
    Engine room, learning
    you don't need the updater if you know how to use cIOS installer homebrew.
    http://www.mediafire.com/download/5ggh53tj9hhp1tr/d2x-cios-installer-3.1-v6-v7-v8-v10-wii.7z

    you currently have old cIOS.
    IOS249[56] (rev 20 Info: rev 20): Flash Access, NAND Access
    IOS250[38] (rev 20 Info: rev 20): Flash Access, NAND Access

    you need to update to at lease rev21 d2x v8
    IOS249[56]
    IOS250[57]


    in the installer, choose this:
    d2x v8
    slot 249
    base 56
    version 21008

    and

    d2x v8
    slot 250
    base 57
    version 21008


    if you don't know how to use the installer, you can use modmii to update all your softmod.
     
  3. Swedguy97
    OP

    Swedguy97 Member

    Newcomer
    20
    0
    Jan 23, 2015
    I used the installer and installed the CIOS, but my Wii still freezes,

    Here's the IOSsyscheck I ran after it froze;

    Warning: Spoilers inside!
     
  4. Swedguy97
    OP

    Swedguy97 Member

    Newcomer
    20
    0
    Jan 23, 2015
    *bump*

    The game I'm trying to load is SSBB. And when I try to use WiiFlow I get an error saying "disc_setusb failed"
     
  5. Swedguy97
    OP

    Swedguy97 Member

    Newcomer
    20
    0
    Jan 23, 2015
    Yeah, the file was just called IOSsyscheck when I checked my SD Card. Don't even know where that's from. Here's the right syscheck;
    Warning: Spoilers inside!
     
  6. Swedguy97
    OP

    Swedguy97 Member

    Newcomer
    20
    0
    Jan 23, 2015
    I did. I used the Multi-Mod Manager it gave me and installed all the WADs, but I'm still getting the same result. According to the guide ModMii downloaded, I don't need to reinstall HBC if it has IOS58, which it has. Should I still run the HackMii installer to reinstall HBC?
     
  7. Cyan

    Cyan GBATemp's lurking knight

    Global Moderator
    18,308
    8,767
    Oct 27, 2002
    France
    Engine room, learning
    no you don't need to reinstall HBC or IOS58.
    You need to install IOS249 and IOS250.

    install all the wads modmii downloaded, as you have a bad console's hack.
    it will replace all your system files with correct versions. (never use pimpmyWii, CIOSCorp or DarkCorp, thanks)
     
    Swedguy97 and Kelton2 like this.
  8. Swedguy97
    OP

    Swedguy97 Member

    Newcomer
    20
    0
    Jan 23, 2015
    I istalled the IOS's and now I'm running SSBB on Neogamma, however when I try to use Ocarina codes (They're saved in a GCT file in the folder codes on the root of my sd card) my game freezes on the stage selection screen. Trying to run Brawlex.

    Does Ocarina require a different ios or is there another way to load cheat codes with Neogamma?
     
  9. Swedguy97
    OP

    Swedguy97 Member

    Newcomer
    20
    0
    Jan 23, 2015
    What's happening now with Neogamma is it doesn't load my GCT codes (it says "No patch found)

    I then try the USB Channel and it says the same thing, and it freezes on the stage selection screen. It also freezes even when I have Ocarina turned off.
     
  10. Cyan

    Cyan GBATemp's lurking knight

    Global Moderator
    18,308
    8,767
    Oct 27, 2002
    France
    Engine room, learning
    don't use neogamma (which is 5 years old, not updated anymore).
    current loaders : Wiiflow, CFG Loader, USBLoaderGX, PostLoader

    could you post a new syscheck so we can be sure everything is fine?
     
  11. Swedguy97
    OP

    Swedguy97 Member

    Newcomer
    20
    0
    Jan 23, 2015
    Sure;
    Warning: Spoilers inside!


    Bear in mind I reverted back to the Ios i had earlier to go back to regular brawl, and that freezes after I leave the Result Screen. That still happened before I went to Project M 3.5, and when I installed project m 3.5 it worked fine.
     
  12. Cyan

    Cyan GBATemp's lurking knight

    Global Moderator
    18,308
    8,767
    Oct 27, 2002
    France
    Engine room, learning
    You are using these two IOS:
    IOS249[37] (rev 21008 Info: d2x-v8final): Flash Access, NAND Access
    IOS250[37] (rev 20 Info: rev 20): Flash Access, NAND Access

    249 is d2x v8 (it's good, it's in fact rev21 mod8)
    250 is revision 20 (it's old and not recommended to use this version)
    both slots are using base37.

    it's usually recommended to install this instead:

    249 : d2x v8 base 56
    250 : d2x v8 base 57

    base56 is both fast and reliable for most games.
    base57 has more compatibility but is a little slower to access USB.
    that's why users prefer to install base56 for their general use (90% of games) and select the slot250 only for problematic games like Call of duty or musical games.

    You an find the installer here, it's easy to replace the cIOS, just install the new one over.
     
  13. Kbra

    Kbra Newbie

    Newcomer
    6
    0
    Jun 22, 2013
    Mexico
    Guys im having the same problem, im loading Super Smash Bros Brawl via SD card in Configurable usb loader, the file is WBFS and split in 2, but CFG is detecting it, but when i load the game it goes black screen.

    SysCheck v2.3.1 HacksDen Edition by JoostinOnline, Double_A, R2-D2199, and Nano
    ...runs on vIOS58 (rev 6176).

    Region: NTSC-U
    System Menu 4.3U (v513)
    Priiloader installed
    Drive date: 09.07.2006
    Homebrew Channel 1.1.2 running on IOS61

    Hollywood v0x11
    Console ID: 70762270
    Console Type: Wii
    Shop Channel Country: Mexico (36)
    Boot2 v4
    Found 70 titles.
    Found 52 IOS on this console. 5 of them are stub.

    IOS4 (rev 65280): Stub
    IOS9 (rev 65535): Trucha Bug
    IOS10 (rev 768): Stub
    IOS11 (rev 65535): Trucha Bug
    IOS12 (rev 526): No Patches
    IOS13 (rev 1032): No Patches
    IOS14 (rev 1032): No Patches
    IOS15 (rev 1032): No Patches
    IOS16 (rev 54321): Trucha Bug, ES Identify, Flash Access, NAND Access
    IOS17 (rev 65535): Trucha Bug
    IOS20 (rev 65535): Trucha Bug
    IOS21 (rev 65535): Trucha Bug
    IOS22 (rev 1294): No Patches
    IOS28 (rev 65535): Trucha Bug
    IOS30 (rev 65535): Trucha Bug
    IOS31 (rev 3608): No Patches
    IOS33 (rev 65535): Trucha Bug
    IOS34 (rev 3608): No Patches
    IOS35 (rev 65535): Trucha Bug, ES Identify, NAND Access
    IOS36 (rev 65535): Trucha Bug, ES Identify, NAND Access
    IOS37 (rev 65535): Trucha Bug, NAND Access
    IOS38 (rev 65535): Trucha Bug
    IOS40 (rev 65535): Trucha Bug
    IOS41 (rev 65535): Trucha Bug
    IOS43 (rev 65535): Trucha Bug
    IOS45 (rev 65535): Trucha Bug
    IOS46 (rev 65535): Trucha Bug
    IOS48 (rev 65535): Trucha Bug
    IOS50 (rev 65535): Trucha Bug
    IOS51 (rev 4864): Stub
    IOS52 (rev 65535): Trucha Bug
    IOS53 (rev 65535): Trucha Bug
    IOS55 (rev 65535): Trucha Bug
    IOS56 (rev 65535): Trucha Bug
    IOS57 (rev 65535): Trucha Bug
    IOS58 (rev 6176): USB 2.0
    IOS60 (rev 65535): Trucha Bug
    IOS61 (rev 5662): No Patches
    IOS62 (rev 6430): No Patches
    IOS70 (rev 65535): Trucha Bug
    IOS80 (rev 65535): Trucha Bug
    IOS90 (rev 54321): Trucha Bug
    IOS202[60] (rev 65535, Info: hermes-v5.1): Trucha Bug, NAND Access, USB 2.0
    IOS222[38] (rev 65535, Info: hermes-v4.0): Trucha Bug, ES Identify, NAND Access, USB 2.0
    IOS223 (rev 65280): Stub
    IOS224[57] (rev 65535, Info: hermes-5.1): Trucha Bug, NAND Access, USB 2.0
    IOS236 (rev 54321): Trucha Bug, ES Identify, NAND Access
    IOS247[37] (rev 21006, Info: d2x-v6): Trucha Bug, NAND Access, USB 2.0
    IOS248[56] (rev 21006, Info: d2x-v6): Trucha Bug, NAND Access, USB 2.0
    IOS249 (rev 65280): Stub
    IOS250 (rev 65535): Trucha Bug, NAND Access, USB 2.0
    IOS254 (rev 65281): BootMii
    BC v6
    MIOS v10 (DIOS MIOS 2.11+)
    Report generated on 12/28/2012.

    Basically im trying to be able to run GC and Wii games from my same SD card. i know i got homebrew and priiloader but after that i dont really remember what i had to do. (so long since i picked up my wii). i do manage to run gc games from nintendont now, only that SSBB black screen error xd.
     
  14. Cyan

    Cyan GBATemp's lurking knight

    Global Moderator
    18,308
    8,767
    Oct 27, 2002
    France
    Engine room, learning
    You need to reinstall a custom IOS (cIOS), because the one you currently have are either old or fake (nintendo installed a fake IOS to prevent you launching backups from USB).

    use the same installer I linked above.
    install d2x v8, base 56 in slot 249
    install d2x v8, base 57 in slot 250

    it should work now.
     
  15. Kbra

    Kbra Newbie

    Newcomer
    6
    0
    Jun 22, 2013
    Mexico
    i installed them, but its still not working , and btw every time i open configurable usb loader it starts auto loading from the usb and it tells me what ios to select to load default is 248, i try changing it to 249, then pressing a then the usb or sd load pops out, i select SD, then select super smash bros brawl and when its loading it, i noticed at the final it says ios blocked 248.
     
  16. Foxi4

    Foxi4 On the hunt...

    pip Reporter
    23,558
    21,536
    Sep 13, 2009
    Poland
    Gaming Grotto
    Delete the config file of your loader, it will generate a new one with default values. Preferably update to the latest version first, too.
     
  17. Kbra

    Kbra Newbie

    Newcomer
    6
    0
    Jun 22, 2013
    Mexico
    i only left the files in the app folder for cfg, now everytime i open it it asks me usb or sd, how i like it, but now i got a usb formatted to wbfs with super smash bros brawl in it and i got an sd with brawl split into 2 files of 4gb or less, both arent working, the wbfs one loads faster but at final it still says ios 248 blocked and it goes black screen, same for the sd one, tho in the sd one, when i press the brawl cover icon it lags a bit. but same error overall, blackscreen.

    EDIT: now the wbfs usb brawl works but only if i put hook type VBI.
     
  18. Foxi4

    Foxi4 On the hunt...

    pip Reporter
    23,558
    21,536
    Sep 13, 2009
    Poland
    Gaming Grotto
    Why are you using WBFS? Switch to FAT32, WBFS is legacy.
     
  19. Swedguy97
    OP

    Swedguy97 Member

    Newcomer
    20
    0
    Jan 23, 2015
    Sorry for the late reply, I'll get around to installing it pretty soon
     
  20. Swedguy97
    OP

    Swedguy97 Member

    Newcomer
    20
    0
    Jan 23, 2015
    Thanks man, it's working now :)