Hacking Fan 100% all the time

Rodsmoc

Rodsmoc

Member
OP
Newcomer
Level 1
Joined
Aug 23, 2023
Messages
5
Trophies
0
Age
34
XP
45
Country
Brazil
Goodnight
After installing HWfly, I noticed a short in a capacitor on the processor, after making the change the switch started working again but the fan remains at 100% speed all the time, I sent it to a friend to look at and he replaced several components but the fan It continues in the same way, he thinks there is a problem with the processor, other than this problem the switch works normally.
I noticed that the fan, after removing the sticker on the back, is exposed to the 4 soldering points. Would it be possible to solder directly to the board and place a resistor so that the fan is always in the 40% range? Could someone help me? I can do the soldering, but I don't know the points I should look for and which resistor to use.
I appreciate any help
 
E

Eukal1

New Member
Newbie
Level 1
Joined
Nov 6, 2024
Messages
2
Trophies
0
Age
43
XP
15
Country
Belgium
Rodsmoc said:
Goodnight
After installing HWfly, I noticed a short in a capacitor on the processor, after making the change the switch started working again but the fan remains at 100% speed all the time, I sent it to a friend to look at and he replaced several components but the fan It continues in the same way, he thinks there is a problem with the processor, other than this problem the switch works normally.
I noticed that the fan, after removing the sticker on the back, is exposed to the 4 soldering points. Would it be possible to solder directly to the board and place a resistor so that the fan is always in the 40% range? Could someone help me? I can do the soldering, but I don't know the points I should look for and which resistor to use.
I appreciate any help
Click to expand...
Hello did you have find a solution ? Thanks
 

Site & Scene News

Go to forum More news

Popular threads in this forum

I'm so disappointed in Nintendo's next console

Perfect dark switch port??!

Is it safe now to update to 19.0.1?

19.0.1 switch OFW just dropped

need help after doing the worst mistake i could.

Hacking Feedback  I fucked up my brother's switch

Is the brew dead?

purple screen on OLED After picofly install

General chit-chat
Help Users
  • No one is chatting at the moment.
  • A @ anotherthing:
    Speaking of Angband, why has no one ever made Angband 3D for the 3DS?
  • SylverReZ @ SylverReZ:
    @anotherthing, And a let down it was. I was quite fascinated when EZ-Flash announced the product, and wanted to buy it. But was let down by the reviews and the responses from people on here, hence why I avoided it like the plague, as if I really needed another one. I'm fine with what I've currently got atm. :P
     +1
  • A @ anotherthing:
    I bought one.
  • SylverReZ @ SylverReZ:
    @anotherthing, How was it? Did it suck per usual?
     +1
  • A @ anotherthing:
    It's very not exceptional.
     +1
  • A @ anotherthing:
    I was expecting it to do something more than pretty much every other card out there, and it doesn't do anything more.
     +1
  • SylverReZ @ SylverReZ:
    Understandable. I did try to warn others about this cartridge, but they didn't listen to me or anybody else about the EZ-Flash and bought them anyways, only to realise that they wasted their money.
     +1
  • SylverReZ @ SylverReZ:
    @anotherthing, It acts kinda the same way as an Ace3DS+ cartridge, because it uses the commonly known Wood kernel as a base.
     +1
  • A @ anotherthing:
    I have three EZ Flash Omega/DEs and I really was thinking that the EZ Flash Parallel would work similar to how the Omega worked. Where it recognizes the file extension and loads that file accordingly.
     +1
  • A @ anotherthing:
    To play an NES game on the EZ Flash Omega, you just toss it on the SD card and select it from the menu and it loads it in to the NES emulator.
     +1
  • A @ anotherthing:
    The EZ Flash Parallel just works like every single other card I have.
     +1
  • A @ anotherthing:
    My wife just got a 3DS, and I was hoping that the EZ Flash Parallel was something I wouldn't have to walk her through.
     +1
  • A @ anotherthing:
    I can walk her through how to do something like loading an NES game on a $10 cartridge.
     +1
  • SylverReZ @ SylverReZ:
    @anotherthing, Cool.
  • SylverReZ @ SylverReZ:
    At least she has a console to play games on. :D
  • A @ anotherthing:
    We've been playing Animal Crossing in the morning after I finish chores and before she heads to work.
     +1
  • SylverReZ @ SylverReZ:
    I've never played Animal Crossing Wild World for a long time. Probably the best games on the system so far.
     +1
  • A @ anotherthing:
    I hadn't played the game in about a year until she started playing it. My first day back involved a lot of weeding.
     +1
  • A @ anotherthing:
    Speaking of chores, they need to be started in about six and a half hours, so I need to hit the sack.
  • A @ anotherthing:
    You all take care!
  • SylverReZ @ SylverReZ:
    @anotherthing, Thanks, been nice talking to you for a change.
     +1
  • SylverReZ @ SylverReZ:
    Take care now.
     +1
  • kijetesantakalu042 @ kijetesantakalu042:
    good night
     +1
  • The_Dizzy_Vizzy @ The_Dizzy_Vizzy:
    Ahh hell I just missed him!!!!
  • K3Nv2 @ K3Nv2:
    I love going to the drive thru like can I get some ketch up? Can I get some ketch up? You get home and there is still no ketch up
    K3Nv2 @ K3Nv2: I love going to the drive thru like can I get some ketch up? Can I get some ketch up? You get...