- Joined
- Jul 14, 2011
- Messages
- 305
- Trophies
- 1
- Location
- Somewhere
- Website
- www.tozeleal.orgfree.pt
- XP
- 1,380
- Country
I think 30-40w is good. Just be fast and everything will work fine.
@Gadorach Looking at the "DSi (Side B)" photo is there any reason why the signals cant be tapped from the vias just after the resistors? (e.g. For CMD the via just after resistor R94 near the silkscreen P21, and for CLK the via just after R113 and EM14) Or would this not work?
Nevermind i could read the CID with my laptop.Can someone complete the CID raspi guide?
No i got it working and i uploaded some videos on yt but i killed one resistor while experimenting some days later.Is your DSi bricked?
Shet... What you did to kill the poor resistor :S ... that makes me a little scared to hardmod my DSi... probably i could fry something :SYes i already ordered a new one.
I desoldered and soldered the hardmod 5 times before but at 3am mixed up the gnd and clk wire.Shet... What you did to kill the poor resistor :S ... that makes me a little scared to hardmod my DSi... probably i could fry something :S
That explains everything! But why you hardmod 5 times? You should created a "hardmod easy IO port" ... with that shouldn't need anymore to unsolder and resoldered again with the risk of screwing the DSi motherboard componentsI desoldered and soldered the hardmod 5 times before but at 3am mixed up the gnd and clk wire.
I did the hardmod with components i had at home and i edited the nand the nand multiple times.That explains everything! But why you hardmod 5 times? You should created a "hardmod easy IO port" ... with that shouldn't need anymore to unsolder and resoldered again with the risk of screwing the DSi motherboard components
Btw... how much costs an resistor for the DSi?I did the hardmod with components i had at home and i edited the nand the nand multiple times.