Toggle sidebar

Hacking Cover Flow USB ISO Loader by Beardface

  • Thread starter Thread starter Nullkill
  • Start date Start date
  • Views Views 860,693
  • Replies Replies 3,029
Status
Not open for further replies.
This loader is great, it looks so fine!

but... for me only 1.2 works!
Any version after 1.2 freezes at startup
frown.gif


My wii:
FW 4.1E (Waninkoko update)
cIOS38 rev14 (249 install)
BootMii beta2 (boot2 install)
Preloader 0.29 + Hacks
HBC 1.0.3

Greetz JD
 
why is there a edit button shown when selecting the 'infinite hearts' cheat for donkey kong jungle beat (ntsc-u)? the cheat works 100% and no editing is involved.

just curious why
smile.gif
 
sakax said:
why is there a edit button shown when selecting the 'infinite hearts' cheat for donkey kong jungle beat (ntsc-u)? the cheat works 100% and no editing is involved.

just curious why
smile.gif
Click to expand...

It's because some cheats use "B" as a variable for editable values, I've never found an instance where a single "B" is used so I check for "BB" as a possible editable value.

Hope this makes sense. I thought it best to have the occasional false-positive (rare) rather than risk missing some genuine editable values....
 
Grrr. Starting today, I haven't been able to launch this app. It hangs on Initializing Disc, on every version now. I haven't changed anything, it just started doing this. I've tried changing cIOS between 13a, 12, and 11. To no avail, as well as trying version 1.0, 1.1 and 1.2a.
 
there was no 11, try deleting CF config files and try using the original setup agian
 
Fiesty Panda said:
Grrr. Starting today, I haven't been able to launch this app. It hangs on Initializing Disc, on every version now. I haven't changed anything, it just started doing this. I've tried changing cIOS between 13a, 12, and 11. To no avail, as well as trying version 1.0, 1.1 and 1.2a.

is your network connection working? coverfloader crashes when there is no active internet connection...


QUOTE(fishears @ Aug 30 2009, 11:13 PM) It's because some cheats use "B" as a variable for editable values, I've never found an instance where a single "B" is used so I check for "BB" as a possible editable value.

Hope this makes sense. I thought it best to have the occasional false-positive (rare) rather than risk missing some genuine editable values....
Click to expand...

yes it made sense
smile.gif


also, starting coverfloader and quitting (without having started a game) results in a code dump. this bug is reproducable. i have the latest release which was posted on previous page.
 
Thanks for the advice, I let it sit for a while, and eventually, after 15 minutes or so, one time it booted fine. This leads me to believe its a hard drive problem /:(. No matter though, I'll start my usb-loader folder fresh again, and worst case scenario, turn my 80gb Classic into my Wii's hard drive.

I do have an internet connection, but where I'm at, its a 56kb/s dialup connection. Its enough to install cIOS updates over network and CoverFloader has worked in the past with this connection. Any other tips? I'm not in much of a hurry, I probably won't play anything else until I can get back home and download MP Trilogy.
 
sakax said:
Fiesty Panda said:
Grrr. Starting today, I haven't been able to launch this app. It hangs on Initializing Disc, on every version now. I haven't changed anything, it just started doing this. I've tried changing cIOS between 13a, 12, and 11. To no avail, as well as trying version 1.0, 1.1 and 1.2a.
Click to expand...

is your network connection working? coverfloader crashes when there is no active internet connection...
Click to expand...


That is actually untrue. I just gave my brother his wii back after fixing it up, deleted my connection before he came over, and it worked almost flawlessly when I was showing him how to work everything.
At least on 1.1 its good. Not sure about the higher revs.
 
Fiesty Panda said:
Thanks for the advice, I let it sit for a while, and eventually, after 15 minutes or so, one time it booted fine. This leads me to believe its a hard drive problem /:(. No matter though, I'll start my usb-loader folder fresh again, and worst case scenario, turn my 80gb Classic into my Wii's hard drive.

I do have an internet connection, but where I'm at, its a 56kb/s dialup connection. Its enough to install cIOS updates over network and CoverFloader has worked in the past with this connection. Any other tips? I'm not in much of a hurry, I probably won't play anything else until I can get back home and download MP Trilogy.
Click to expand...


I assume you are on NTSC-U. Grab cIOS rev 14, and Coverfloader 1.1 (This combo works just fine with my unit)

When it hangs (this works almost everytime for me)..unplug the power from the hard drive. Sometimes CF will then throw the "HDD not detected" error. If it does, turn on the HDD and press OK, OK , I usually have go repeat the 2 popups then it gets recognized. If you dont get that error, then do a hard power off on the wii (The light should turn red). Turn the Wii back on, give juice back to the HDD, and hopefully you will be good.
G'luck
 
sakax said:
...starting coverfloader and quitting (without having started a game) results in a code dump. this bug is reproducable. i have the latest release which was posted on previous page.
Click to expand...
I'm not having this problem although there are various reports of instability around. We are looking into all of them but it's hard for me to debug when it runs flawlessly on my setup
wink.gif
 
rutny said:
sakax said:
Fiesty Panda said:
Grrr. Starting today, I haven't been able to launch this app. It hangs on Initializing Disc, on every version now. I haven't changed anything, it just started doing this. I've tried changing cIOS between 13a, 12, and 11. To no avail, as well as trying version 1.0, 1.1 and 1.2a.
Click to expand...

is your network connection working? coverfloader crashes when there is no active internet connection...
Click to expand...


That is actually untrue. I just gave my brother his wii back after fixing it up, deleted my connection before he came over, and it worked almost flawlessly when I was showing him how to work everything.
At least on 1.1 its good. Not sure about the higher revs.
Click to expand...


really? i have 2 wiis overhere. both are crashing when i open coverfloader without a working network connection. my setup is as follows:

> fw 4.1E
> cios38rev14
> coverfloader 1.2a

could the problem be caused by cios38 rev14 ??

im not joking this time. each time i launch coverfloader without connection it is crashing after 5 seconds. other people are facing the same http://code.google.com/p/wiicoverflow/issues/detail?id=379
 
sakax said:
really? i have 2 wiis overhere. both are crashing when i open coverfloader without a working network connection. my setup is as follows:

> fw 4.1E
> cios38rev14
> coverfloader 1.2a

could the problem be caused by cios38 rev14 ??

im not joking this time. each time i launch coverfloader without connection it is crashing after 5 seconds. other people are facing the same http://code.google.com/p/wiicoverflow/issues/detail?id=379
Click to expand...

I've sent you a PM
 
I also have this issue, I have a weak internet connection in my room, and it's hit or miss whether or not it will crash or not. Sometimes it stays open long enough to highlight a game, other times it crashes or just freezes with no code dump right after loading all the way. I have a 3.2u wii with CIOS38rev14 also using coverflow 1.2a. I used 1.2 briefly and I don't think I ever had crash issues.
 
Just compiled CoverFloader for the first time and wanted to pass along a few tips for those having compile errors/issues.

If you are using the latest libogc, you may be getting 'Vector' undeclared errors. To fix this, open:
include/GRRLIB.h
source/GRRLIB.c
Find and replace all instances of the word Vector with guVector and you should be fine. (4 instances in GRRLIB.h and 18 instances in GRRLIB.c last I checked)

If you are getting the above error due to using the latest libogc, then you are most likely also getting an error stating conflicting types for 'settime' in disc.c so open:
source/core/disc.c
Find the this line (line 163 last I checked):
Code: 
ÂÂÂÂextern void settime(long long);
Replace that line with:
Code: 
ÂÂÂÂextern void settime(u64);
The error should be cleared up now.

If you are getting an error with version.h, open up Makefile and find this line:
Code: 
ÂÂÂÂ@echo -n "#define SVN_VERSION " >> include/version.h
Replace that line with:
Code: 
ÂÂÂÂ@echo "#define SVN_VERSION \c" >> include/version.h
The -n flag passed to the echo statement writes out the line without a trailing newline. This can also be achieved without the -n flag if you append a \c at the end of the string. Read the echo man page for more info.

If you're having any other compile issues, you're welcome to post here and then PM me to notify me of your post. I'm lazy and might not notice if you don't PM me.
 
Status
Not open for further replies.

Site & Scene News

Go to forum More news

Popular threads in this forum

NooDS-Wii

Hacking  Trying to revive an old bricked Wii | Any help appreciated!

Homebrew  Sonic Generations

DolRecomp, a Wii/GameCube static recompiler, was recently made public

Hacking ROM Hack  AHBPROT not enabled, all homebrew crashes (IOS58 v2 issue)

Translation  Luigi's Mansion recompiled has hit the title screen

Hacking Emulation  Is it possible to install a NDEV Wii System to Dolphin?

Emulation  New Sharp x68000 Retroarch Wii Core C68K Cyclone Big Edian