RELEASE Awoo Installer - A No-Bullshit NSP/NSZ/XCI/XCZ Installer Based on Tinfoil

So I just had a brain wave, Decided to make a wireless hotspot with my laptop, cut out the router entirely and now and I get about 9 ish MB over WiFi. Still not quite USB speed but not bad. Might have to try to procure a USB to LAN adapter for the switch, did they ever release a USB 3 compatible one or are they all still USB 2?

 

What are the dimensions (width x height) for replacing the main menu picture?​

 

I don't have any license.dat file , nor have an sx is license and it's still crashing on kosmos ams and normal ams. On ReiNX working almost done. But I need it to work on ams...

 

It doesn’t work with sxos either you just get a black screen the switch crashes so you’re not on your own.

 

SX OS i snot compatible, but ams should be...

 

My main issue with Awoo network installs is that it doesn't work on mac with NS-USB Loader.

 

I see thanks, he’s one of those is he “I will not support TX SXOS because it rips off Atmosphere code so what I will do instead is rip off Goldleaf and repack it with a different label and block sxos!” Yeah that makes perfect sense..

 

If it's an issue of NS-USBloader why don't you report an issue on GH or reply to appropriate thread with all logs/OS versions and other information that could be useful?
You don't have to if you don't want to, but it's kinda strange IMO

 

Don't know if it's a server or client issue, but i get the error message "Failed to retrieve HTTP Header: Couldn't connect to server" when trying to install with awoo. I'm certain of switch IP and server, don't know what's the problem. Using Mac Catalina and switch 9.0.1 Kosmos

 

a "no bs" installer but specifically including code to block a cfw you don't like, like fair enough if you don't want to include code to make it work if you don't want to (what not being supported really means tbh) but that's not what's happening.

 

The license check was removed in v1.1.0.

 

fair enough then, i take it back. just looked at the first page.

 

Yeah, well, the problem is near the client/JDK/macOS.

I need logs from here after you see an issue in Awoo.



Thanks!

 

Arquivos para upar:
/Users/jmrodrigues78/Downloads/xxx.nsz
[ PASS ] NET: Your IP defined as: 192.168.1.6
[ PASS ] NET: Your port detected as: 6445
[ INFO ] Start chain
[ PASS ] NET: Initiation files list has been sent to NS.
[ INFO ] NET: Interrupted by user.
[ PASS ] NET: Closing server socket.
[ INFO ] End chain

Same thing, switch detects the hosted file, but after awoo shows:
Failed to install xxx.nsz!
Partially installed contents can be removed from the System Settings applet.
PerformRequest:93: Failed to retrieve HTTP Header: Couldn't connect to server.

Goldbricks and Goldleaf, freeze on Remote PC(USB)
[ INFO ] Start chain
[ PASS ] libusb initialization
[ PASS ] Get device list
[ PASS ] Read file descriptors for USB devices
[ PASS ] NS in connected USB devices found
[ PASS ] Open NS USB device
[ INFO ] Free device list
[ WARN ] libusb doesn't support function 'CAP_SUPPORTS_DETACH_KERNEL_DRIVER'. It's normal. Proceeding.
[ PASS ] Set active configuration to device.
[ PASS ] Claim interface
[ INFO ] TransferModule: Validating split files ...
[ INFO ] TransferModule: Validation complete.
[ INFO ] ============= GoldLeaf =============
VIRT:/ equals files added into the application
HOME:/ equals /Users/Jorge
[ FAIL ] GL Data transfer issue [read]
Returned: ERROR_IO
[ FAIL ] GL Execution stopped
[ PASS ] Release interface
[ INFO ] Requested handler close
[ INFO ] Requested context close
[ INFO ] End chain

Goldleaf works fine with .nsp and NS-USB
Can't find a solution for nsz files yet.

Awoo, Goldleaf and Goldbricks are being used on hbl applet mode.

 

There is something wrong with your firewall settings. I've checked on Mojave virtual machine and most likely (it's a long story why) it works. Firewall has been disabled. So I assume you have to adjust your OS settings and it would be working for you.
Here is the link that could be useful: https://www.mkyong.com/mac/how-to-access-web-server-8080-in-mac-os-x/

As for GoldLeaf: it doesn't support NSZ files at the moment (as I know). 'Goldbricks' in the early beginning of the readme file saying that it doesn't support anything but 'Nut' ¯\_(ツ)_/¯

 

Any updates?

 

What issues are you having with implementing usb installs? I read your post of github, what are the random restarts?

I have an extremely basic implementaion of usb installs in my own installer that you can look at, though it won't work with any existing pc cleint (it wouldn't take long to write you own).

Here's the link if you want to look at it https://github.com/ITotalJustice/Yati/blob/master/source/usb.c

 

Thank you for the help, but still the same error on Catalina, even disabling firewall didn't work.