No, the only way to get B9S on 11.4/11.5 is with a hardmod, NTRBootHaX, or DsiWareHaX.
You need another 3ds with cfw or a compatible ds mode flashcart like this http://www.nds-card.com/ProShow.asp?ProID=149 to install cfw. Check https://3ds.guide
Ok thanks thats what I thought, gonna go with ntrboothax. Does anyone know if modchipsdirect is a reputable site? They carry the r4i 3ds and ship from my state.
@Majickhat55 @Uumas this is what I got as a result of the check
The media is likely to be defective.
59.4 GByte OK (124696574 sectors)
1 KByte DATA LOST (2 sectors)
Details:0 KByte overwritten (0 sectors)
0 KByte slightly changed (< 8 bit/sector, 0 sectors)
1 KByte corrupted (2 sectors)
0 KByte aliased memory (0 sectors)
First error at offset: 0x0000000048f6ff80
Expected: 0x93149d4ff517af80
Found: 0xb5fb1c709016af80
H2testw version 1.3
Writing speed: 7.65 MByte/s
Reading speed: 21.6 MByte/s
H2testw v1.4
The media is likely to be defective.
59.4 GByte OK (124696574 sectors)
1 KByte DATA LOST (2 sectors)
Details:0 KByte overwritten (0 sectors)
0 KByte slightly changed (< 8 bit/sector, 0 sectors)
1 KByte corrupted (2 sectors)
0 KByte aliased memory (0 sectors)
First error at offset: 0x0000000048f6ff80
Expected: 0x93149d4ff517af80
Found: 0xb5fb1c709016af80
H2testw version 1.3
Writing speed: 7.65 MByte/s
Reading speed: 21.6 MByte/s
H2testw v1.4
If the test shows the result Test finished without errors, your SD card is good and you can delete all .h2wfiles on your SD card
If the test shows any other results, your SD card may be corrupted or damaged and you may have to replace it!
@Majickhat55 so redo the test till there is no corrupted and if they don't go away get a new one? I am gonna try putting my back up back in it first and then re run the test.
It's not going to help re-running the test. It seems to be a faulty card.
I knew he was fairly young, but he is definitely talented. Most people in the 3DS scene are fairly young. Several of the big names are teenagers or in their 20's. Hopefully he finds time to work on it in the future. I agree with, I still can't.
You have a9lh. Luma versions 7.0.5 and below don't support b9s and versions 7.1 and above don't support a9lh
Edit. Thanks @Quantumcat
Last edited by Uumas,
- Joined
- Nov 23, 2014
- Messages
- 15,144
- Trophies
- 0
- Location
- Canberra, Australia
- Website
- boot9strap.com
- XP
- 11,119
- Country
Another question. I'm going throw the A9LH to B9S tutorial. It says that I should copy secet_sector.bin to the boot9strap folder in my SD card, but NEW 3DS USERS ONLY. Does that include NEW 3DS XL?
Similar threads
- No one is chatting at the moment.
-
-
-
-
-
-
-
-
@
SylverReZ:
You can make a post on the DS forum about your findings, and they'll do their best to respond. They have a GBAtemp account here, you know. -
@
Materia_tofu:
oh ye i made a post i did forget they had an account i prob shouldve tagged them in the post+1
tbh -
-
-
-
-
@
BakerMan:
Update on my brother: He's home now, tired and hungry, obviously, but other than that, seems to be doing fine.+2 -
-
-
@
BakerMan:
Well, from what I've heard from my parents, he had a seizure last night, perhaps an epileptic episode, fucking died, had a near death experience, my dad called the paramedics, they showed up, took him to the hospital, and he woke up covered in tubes, and started complaining.
-
-
-
-
-
-
-
-
