Safeb9Installer microSD card keep checking
- Thread starter ciupaboy
- Start date
- Views 5,067
- Replies 18
Maybe your SD card is faulty, try backing up all your files somewhere, like your hard drive, then format the card to FAT32 and try putting your stuff back on it and see if it works. Also, what size is your SD card capable of holding?
Are you using this guide here?
What R4 are you using?
Do you cart reader problems, like it doesn't always read the cart, or trouble detecting a cart etc.?
Try redownloading the SafeB9Installer files again and overwrite the old ones, they could be corrupted.
Did you check it with h2testw while it was empty? Have you formatted it after the test?
Sounds like you have all kinds of different issues with your system..
What about Seedminer?
Ofw? Why were you on 4.xx? Is it because the system wasn't updated in a long time, or did you downgrade your system to it from a higher firmware?
Seedminer is to work only with the latest ofw, and not with 4.xx. And you say you can't update your system to the latest firmware?
Did you just install that update? If so, try seeing if you can install haxx again. If it doesn't work then it may be a faulty sd
All done guys? Luma and CFW installed i change 3ds console lol. now i installed on 2gb sd because sd + adapter three sd card no works, now on installing cia files from fbi it failed code xxx out of resource partition full, how ca i solve?
- Joined
- Jun 30, 2022
- Messages
- 1
- Trophies
- 0
- Age
- 31
- Location
- Brasil - Rio Grande do Norte
- XP
- 24
- Country
I got the same problem today, and found a solution.
Replace the boot.firm with Luma3DS's, and load safeb9sinstaller with Luma's payload chainloader. Now the microsd card checking should be successful.
EDIT: I think this may caused by boot9strap 1.4 update.
Apparently, SafeB9SInstaller fails to boot from ntrboot, until it is fixed you will have to do this. You can also use GodMode9 as it doesn't require holding start. Just place godmode9 firm as boot.firm, then go to SD, select the SafeB9SInstaller firm and boot it (press A, firm options, boot).
Similar threads
-
-
@
SylverReZ:
@AncientBoi, Yeah, believe you can do PSP games as well. But a Pi5 is much powerful in comparison.+2 -
-
@
Psionic Roshambo:
Not sure about other models of Pi4 but the Pi 4 B with 8GBs OCed to 2Ghz handles PSP really great except like 1 game I found and it is playable it just looks bad lol Motor Storm Arctic something or other. -
@
Psionic Roshambo:
Other games I can have turned up to like 2X and all kinds of enhancements, Motorstorm hmmm nope 1X and no enhancements lol
-
-
@
Psionic Roshambo:
I will admit that one does seem more interesting than the usual Ambernic ones, and I already liked those.
-
-
-
-
-
-
@
Veho:
I mean yeah sure but the specs are the same as a $50 model, it's just those pesky "quality of life" things driving up the price, like an actually working speaker, or buttons that don't melt, and stuff like that.+1 -
@
Psionic Roshambo:
I think all in my Pi 4 was well north of 200 bucks 150ish for the Pi 4 the case the fancy cooler, then like 70 for the 500GB MicroSD then like 70 for the Xbox controller. But honestly it's a nice set up I really enjoy and to me was worth every penny. (even bought more controllers for 2 or 4 player games.) hmmm have never played any 2 player games yet
-
@
Veho:
Yeah that's what I hate about the RPi, it's supposedly $30 or something but it takes an additional $200 of accessories to actually turn it into a working something.
-
-
-
@
Psionic Roshambo:
Yeah a lot of it I consider a hobby, using Batocera I am constantly adjusting the collection adding and removing stuff, scraping the artwork. Haven't even started on some music for the theme... Also way down the road I am considering attempting to do a WiiFlow knock off lol
-
-
-
@
Veho:
Hmm, with that in mind, maybe a complete out-the-box solution with all the games collected, pacthed and optimized for me would be worth $150
-
-
-
-
@
SylverReZ:
What its like to do online shopping in 1998: https://www.youtube.com/watch?v=vwag5XE8oJo
