Safeb9Installer microSD card keep checking

[ciupaboy]

Hi guys, I've just installed SafeB9Installer but my 3ds stuck on microsd card "checking", i'm installing ntrboot via r4, any help? Thanks!

 

[susbaconhairman]

Maybe your SD card is faulty, try backing up all your files somewhere, like your hard drive, then format the card to FAT32 and try putting your stuff back on it and see if it works. Also, what size is your SD card capable of holding?

 

[ciupaboy]

4gb, already checked no issue

 

[susbaconhairman]

Maybe try a different exploit like pikhaxx?

 

[CoolMe]

Hi guys, I've just installed SafeB9Installer but my 3ds stuck on microsd card "checking", i'm installing ntrboot via r4, any help? Thanks!

Are you using this guide here?
What R4 are you using?
Do you cart reader problems, like it doesn't always read the cart, or trouble detecting a cart etc.?
Try redownloading the SafeB9Installer files again and overwrite the old ones, they could be corrupted.

4gb, already checked no issue

Did you check it with h2testw while it was empty? Have you formatted it after the test?

 

[ciupaboy]

Check the card and no issue, i've formatted the sd After the test, I'm using r4isdhc dual. I've tried three times

 

[ciupaboy]

Maybe try a different exploit like pikhaxx?

Cannot use or my e-shop does not launch It crash the console i dont know why

 

[CoolMe]

Cannot use or my e-shop does not launch It crash the console i dont know why

Sounds like you have all kinds of different issues with your system..
What about Seedminer?

 

[ciupaboy]

Sounds like you have all kinds of different issues with your system..
What about Seedminer?

Already did, when i was on system version 4.xx (3ds never update), same excution error armv11, maybe I've not installed bootstrap?

 

[CoolMe]

Already did, when i was on system version 4.xx (3ds never update),

Ofw? Why were you on 4.xx? Is it because the system wasn't updated in a long time, or did you downgrade your system to it from a higher firmware?
Seedminer is to work only with the latest ofw, and not with 4.xx. And you say you can't update your system to the latest firmware?

 

[ciupaboy]

it wasn't updated for a long time i think (used console), now i have the latest 11.15

 

[susbaconhairman]

it wasn't updated for a long time i think (used console), now i have the latest 11.15

Did you just install that update? If so, try seeing if you can install haxx again. If it doesn't work then it may be a faulty sd

 

[ciupaboy]

All done guys? Luma and CFW installed i change 3ds console lol. now i installed on 2gb sd because sd + adapter three sd card no works, now on installing cia files from fbi it failed code xxx out of resource partition full, how ca i solve?

 

[lone_wolf323]

All done guys? Luma and CFW installed i change 3ds console lol. now i installed on 2gb sd because sd + adapter three sd card no works, now on installing cia files from fbi it failed code xxx out of resource partition full, how ca i solve?

Get a bigger sd card. its full. 2gb isnt going to hold anything.

 

[Geann]

Hey Brother, i'm having the same problem here. Waiting to see if this topic can help :v

 

[Jerrylu]

Hey Brother, i'm having the same problem here. Waiting to see if this topic can help :v

I got the same problem today, and found a solution.

Replace the boot.firm with Luma3DS's, and load safeb9sinstaller with Luma's payload chainloader. Now the microsd card checking should be successful.

EDIT: I think this may caused by boot9strap 1.4 update.

 

[fli_guy84]

I got the same problem today, and found a solution.

Replace the boot.firm with Luma3DS's, and load safeb9sinstaller with Luma's payload chainloader. Now the microsd card checking should be successful.

EDIT: I think this may caused by boot9strap 1.4 update.

How do you do that? I tried pressing Start but the menu doesn't appear.

 

[PabloMK7]

I got the same problem today, and found a solution.

Replace the boot.firm with Luma3DS's, and load safeb9sinstaller with Luma's payload chainloader. Now the microsd card checking should be successful.

EDIT: I think this may caused by boot9strap 1.4 update.

Apparently, SafeB9SInstaller fails to boot from ntrboot, until it is fixed you will have to do this. You can also use GodMode9 as it doesn't require holding start. Just place godmode9 firm as boot.firm, then go to SD, select the SafeB9SInstaller firm and boot it (press A, firm options, boot).

 

[fli_guy84]

Apparently, SafeB9SInstaller fails to boot from ntrboot, until it is fixed you will have to do this. You can also use GodMode9 as it doesn't require holding start. Just place godmode9 firm as boot.firm, then go to SD, select the SafeB9SInstaller firm and boot it (press A, firm options, boot).

That works, thanks!