Switch 7.0 Downgrade to 6.2 tutorial

AvatarMew · Jan 31, 2019

Adran_Marit said:
what error?

also press and hold the power button for ~15 seconds

I'm not too sure. I checked the folder where my backup is nd the USER file isn't there, I don't think it saved.

It's not turning on. I'm quite sure it's a dead Switch.

linkstan · Jan 31, 2019

AvatarMew said:
I'm not too sure. I checked the folder where my backup is nd the USER file isn't there, I don't think it saved.

It's not turning on. I'm quite sure it's a dead Switch.

I mean maybe you didn't have enough battery when restoring..it's possible and not necessarily a brick if it's just a black screen try connecting it to usb and see if you hear a sound indicating a connection

AvatarMew · Jan 31, 2019

linkstan said:
I mean maybe you didn't have enough battery when restoring..it's possible and not necessarily a brick if it's just a black screen try connecting it to usb and see if you hear a sound indicating a connection

I had about 70% of battery on my Switch.
Boot 1/0 and everything else but USER was restored. USER couldn't be found as it wasn't in the folder, I'm not sure why.
I'm quite sure this is a hard brick.

linkstan · Jan 31, 2019

AvatarMew said:
I had about 70% of battery on my Switch.
Boot 1/0 and everything else but USER was restored. USER couldn't be found as it wasn't in the folder, I'm not sure why.
I'm quite sure this is a hard brick.

not gonna pretend like I know but i'm currently restoring my backup and believe I read if the current fw doesn't match with backup fw you need to update to current fw (6.2 being the latest working cfw) with Nujudour...I hope I don't run into your problem but if I do I will be needing help too.

The Real Jdbye · Jan 31, 2019

AvatarMew said:
I had about 70% of battery on my Switch.
Boot 1/0 and everything else but USER was restored. USER couldn't be found as it wasn't in the folder, I'm not sure why.
I'm quite sure this is a hard brick.

USER isn't essential, it just contains games, save data, user info and the like.

linkstan · Jan 31, 2019

it worked for me im back on my original dump of 5.1

markiemark · Jan 31, 2019

How do you use hekate to chainboot I was just using SX os previously. Is this a way to restore my 6.2 NAND using the other tool rather than SX OS ?

Have managed to restore the 7.0 NAND backup and resurrect the console but really want to go back down to 6.2.

shenholy · Jan 31, 2019

my gf accidentally update to 7.0 and i dont have any backups. is there any safe way to get back to 6.2? how long does it normally take to get the newest firmware into cfw?

spotanjo3 · Jan 31, 2019

shenholy said:
my gf accidentally update to 7.0 and i dont have any backups. is there any safe way to get back to 6.2? how long does it normally take to get the newest firmware into cfw?

You let your GF use your Switch ? You should turn WIFI off and airplane on and you should have told her not to update it.

You dont have any backups ? Then you are screw! You will have to wait until 7.0 CFW is coming. Since 7.0 is already cracked. Next time, tell her not to update and turn wifi off/Airplane mode on.

I am glad that I dont let anybody touch mine. None.

AvatarMew · Jan 31, 2019

The Real Jdbye said:
USER isn't essential, it just contains games, save data, user info and the like.

Oh, I see I'm confused on why my Switch won't turn on anymore, it did turn on once, it was 6.2.

KirbyIndie · Jan 31, 2019

Adran_Marit said:
If you don't have one then you need to use the old choi method of downgrading

so i have been doing the tutorial so far with one problem keys.txt! you would'ent you happen know a place you could point me in the right direction

AvatarMew · Jan 31, 2019

Could MY Switch not be turning on due to the fact I burnt a fuse to update?

AvatarMew · Jan 31, 2019

My Switch IS able to go into RCM and can load Hekete but not CFW.

shmadul · Jan 31, 2019

Adran_Marit said:
After seeing reports of downgrading back to 6.2 been broken after updating to switch firmware version 7.0, I can confirm these to be false. I successfully downgraded my switch with 9 burnt fuses on 7.0 to 6.2 with 9 burnt fuses

Downgrading to 6.2 is possible and not broken.

Step 1) Place 6.2 nand + boot0/1 backup on sd card

Step 2) Boot into RCM and launch hekate

Step 3) Restore boot 0/1

Step 4) Restore GPP Partitions (or rawnand, I personally used GPP Partitions)

Step 5) Launch CFW using Hekate 4.6 or ReiNX 2.0 (not tested with sxos)

Step 6) ????

Step 7) Profit

EDIT: This is for FG consoles not ipatched

Will upload proof if people desperately wish

Thanks

AvatarMew · Jan 31, 2019

I've kind of fixed my Switch, I formatted my SD card to FAT32 and I was able to access CFW but I can no longer have my Switch on without CFW.

KreeD1337 · Jan 31, 2019

Hi There, ive downgraded successfully

And thanks for the TUT.. saved my Day

Mycah · Jan 31, 2019

Great tutorial! Worked for me only issue I'm having is it is unable to load reinx. It boots and goes black but I am able to boot with hekate.

schezoweggy · Jan 31, 2019

Thank you so much! I accidentally updated (entirely my fault, no "my gerbil did it" excuse) and successfully followed the guide. My only problem is that none of my previously installed games show up now. In Goldleaf, my tickets all say "Unknown Title". Is there anything I can do to restore my games?

Adran_Marit · Jan 31, 2019

shenholy said:
my gf accidentally update to 7.0 and i dont have any backups. is there any safe way to get back to 6.2? how long does it normally take to get the newest firmware into cfw?

You need to do the old downgrade method using the original Choidujour (pc version) or wait for 7.0 support (soon)

KirbyIndie said:
so i have been doing the tutorial so far with one problem keys.txt! you would'ent you happen know a place you could point me in the right direction

Google switch master keys

AvatarMew said:
I've kind of fixed my Switch, I formatted my SD card to FAT32 and I was able to access CFW but I can no longer have my Switch on without CFW.

If your fuses are burnt then you will need to wait for hekate/cfw to be updated to support 7.0 if you want both cfw and ofw

Mycah said:
Great tutorial! Worked for me only issue I'm having is it is unable to load reinx. It boots and goes black but I am able to boot with hekate.

did you use the latest reinx.bin file?

schezoweggy said:
Thank you so much! I accidentally updated (entirely my fault, no "my gerbil did it" excuse) and successfully followed the guide. My only problem is that none of my previously installed games show up now. In Goldleaf, my tickets all say "Unknown Title". Is there anything I can do to restore my games?

Reinstall is the only thing sadly

schezoweggy · Feb 1, 2019

Thanks again! I'll get to reinstalling. Do I delete the old games from the SD card, and, if so, where are they on the SD card?

Well-Known Member

Active Member

Well-Known Member

Active Member

*is birb*

Active Member

New Member

Member

Well-Known Member

Well-Known Member

Member

Well-Known Member

Well-Known Member

Active Member

Well-Known Member

New Member

New Member

New Member

Walküre's Hacker

New Member

Similar threads

Popular threads in this forum

is birb