Actually, it's volume up + power. I mean, from an OFF state console, you hold Volume up, then tap Power. That would put you in RCM, assuming the jig is inserted properly. If you have Windows, try TegraRcmGUI to see if it recognizes the RCM (should turn green if it does). If positive, inject the payload.
If you're not lying with your profile settings, you're living in the same country as me. Maybe you're not too far away so feel free to PM me.
The battery might be empty.
If the battery died completely 30 min wont cut it. You'll need a few hours
Do you have autorcm installed??/ If you do, the battery most likely died? If not, theres still probably a big chance that the battery is dead since your fuses are wrong and its basically bricked atm.
In the most common Tutorials were written that i should stay on the lowest software possible. I saw to late that the threads were outdated ... Simply my fault by having not enough knowledge.Nice that you were able to fix it.Out of curiosity, why did you want to downgrade to your old firmware 2.1?
Bad news is if you have autorcm installed and turned off the switch and left it like that then the battery will just drain a lot. Glad its fixed though. Ive had my switch die once with autorcm mode installed and that was when someone turned it off and set it aside (I thought they put it in sleep mode)
glad you fixed your problem. I'm new to the switch scene too but i was lucky enough to encounter several users that guided in the process of my console's modification. As a newbie, i always investigate a lot of what to do or not before messing with my console by making questions in this place for assistance.
