Hacking SWITCH NOOB PARADISE - Ask questions here

cucholix · Dec 21, 2018

Draxzelex said:
Booting into RCM doesn't turn on the system normally. If you've successfully booted into RCM, it will look like a black screen. Also your serial number has no bearing on whether or not you can enter RCM because even patched units still enter RCM. The only reason we know they're patched is because they fail to accept payloads in RCM.

Thanks for your reply Drax, so I succesfully entered in rcm mode, I have an USB to USB C cable (the one that comes with the Controller Pro) I connect my Switch through it to the computer right? I've installed TegraRcmGUI in windows, but not sure what to do from theresince there's no text in the Switch...

Charli · Dec 21, 2018

cucholix said:
Thanks for your reply Drax, so I succesfully entered in rcm mode, I have an USB to USB C cable (the one that comes with the Controller Pro) I connect my Switch through it to the computer right? I've installed TegraRcmGUI in windows, but not sure what to do from theresince there's no text in the Switch...

You need to install the driver under the "settings" tab in TegraRcmGUI. When you connect your Switch to the PC it will then detect it and show a green "RCM OK" image in the lower left corner:

Here's a very nice guide that explains all the steps really well: https://guide.sdsetup.com/#/accessingrcm

Draxzelex · Dec 21, 2018

WRO said:
+Draxzelex

But, the most recent firmware is 6.2.0 and I can update to 6.2.0 w/ exFAT. If 6.3.0 is released later on
then I could use ChoiDujourNX.

What I am trying to avoid is SD card not being detected when I first install CFW through Hekate.
But, you mentioned how this is not an issue right? Can also dump my eMMC without the exFAT
update. Then update through ChoiDujourNX (man that is a long name and hard to spell).

Also, how do I convert XCI to NSP for use on NS-Atmosphere?

That's why I recommended to use FAT32. If the SD card is larger than 32 GB, you will have to use a third-party tool such as GUIFormat (highly recommended by everyone).

And as explained, exFAT support is irrelevant when it comes to Hekate because its loaded outside of Horizon.

For converting .XCI files, you can use 4NXCI or xci2nsp. Both require keys which can be dumped with the homebrew app, lockpick.

cucholix said:
Thanks for your reply Drax, so I succesfully entered in rcm mode, I have an USB to USB C cable (the one that comes with the Controller Pro) I connect my Switch through it to the computer right? I've installed TegraRcmGUI in windows, but not sure what to do from theresince there's no text in the Switch...

You need to send a payload via TegraRCMGUI (although if I could shill for a second here, I highly recommend TegrarRCMSmash as it has less bugs and is faster than TegraRCMGUI). This would be the .bin file of whatever CFW you want to use. Whatever you guide you are following has surely provided you with a payload to send yes?

cucholix · Dec 21, 2018

Ok I have RCM detected in green, how do I inject the payload? I just want to boot atmosphere cfw, nothing fancy just a game mod

Charli · Dec 21, 2018

cucholix said:
Ok I have RCM detected in green, how do I inject the payload? I just want to boot atmosphere cfw, nothing fancy just a game mod

well.. you select it and press "inject" ^^'
The guide I linked you above explains all further steps to get Atmosphère running in detail.

LegendAssassinF · Dec 21, 2018

Draxzelex said:
SNIP

I am on the HacDiskMount part of the guide and it tells me that Primary and backup GPT are valid but not the same.... which should I pick?

WRO · Dec 21, 2018

+Draxzelex

So I have to format my SD card to FAT32 using GUIFormat convert the XCIs to NSPs which requires
my consoles keys to fake-sign them then split in 4GB parts to install on my Switch?

cucholix · Dec 21, 2018

Yay!, finally can play Dark Souls with decent audio quality

Draxzelex · Dec 21, 2018

WRO said:
+Draxzelex

So I have to format my SD card to FAT32 using GUIFormat convert the XCIs to NSPs which requires
my consoles keys to fake-sign them then split in 4GB parts to install on my Switch?

Yes.

Converting from .XCI to .NSP isn't really fake signing them. Its actually just converting a flag to require the cartridge slot from yes to no. The keys are moreso needed to decrypt the .XCI since you can't get into that flag without breaking apart the .XCI file first. And like I said, if its converted to .NSP format, you don't need to split them to install on a FAT32 formatted SD card as there are workarounds such as network or USB install (highly recommended).

WRO · Dec 21, 2018

Draxzelex said:
Yes.

Converting from .XCI to .NSP isn't really fake signing them. Its actually just converting a flag to require the cartridge slot from yes to no. The keys are moreso needed to decrypt the .XCI since you can't get into that flag without breaking apart the .XCI file first. And like I said, if its converted to .NSP format, you don't need to split them to install on a FAT32 formatted SD card as there are workarounds such as network or USB install (highly recommended).

USB? How with a USB Type C to Type A adapter? So I can use FTP to install NSPs? And I also have to install that Update Nag thing to prevent updates. Say let me install Hekate + NS-Atmosphere first. Then we troubleshoot the rest.

Draxzelex · Dec 21, 2018

WRO said:
USB? How with a USB Type C to Type A adapter? So I can use FTP to install NSPs? And I also have to install that Update Nag thing to prevent updates. Say let me install Hekate + NS-Atmosphere first. Then we troubleshoot the rest.

Any USB cable will work as long as one end is USB-C since that's what the Switch's USB port uses.

FTP is not the same as network install. FTP is a way to transfer any file. Network install is a way to transfer .NSP files over a local network.

teelo · Dec 21, 2018

Running Hekate, system 6.0.1. Can't run the HB App Store without connecting to the internet, can't connect to the internet without updating the system version. Is there a workaround? Otherwise whats the "safest" way to do an update?

Charli · Dec 21, 2018

so I've setup my keys.txt for ChoiDujour as explained in the Lockpick thread. And I think found the correct keys via Google.
I keep getting an error though:
Exception: Invalid NCA header! Are keys correct?

I guess I have to have the correct number of "master_key_0X" entries in my keys.txt? How do I know which ones I need?
I downloaded a 6.1.0 firmware image that consisted of a whole lot of subfolders after extracting.

Draxzelex · Dec 22, 2018

Charli said:
so I've setup my keys.txt for ChoiDujour as explained in the Lockpick thread. And I think found the correct keys via Google.
I keep getting an error though:
Exception: Invalid NCA header! Are keys correct?

I guess I have to have the correct number of "master_key_0X" entries in my keys.txt? How do I know which ones I need?
I downloaded a 6.1.0 firmware image that consisted of a whole lot of subfolders after extracting.

You would need up to masterkey 5 since firmwares under 6.0-6.1 all use that one. As a reference, this thread has a list of the keys (but not their actual values).

WRO · Dec 22, 2018

How can I block Nintendo Switch updates, in order to access Local LAN and other online based
homebrews? Is SuperNag still working?

Draxzelex · Dec 22, 2018

WRO said:
How can I block Nintendo Switch updates, in order to access Local LAN and other online based
homebrews? Is SuperNag still working?

https://gbatemp.net/threads/90dns-dns-server-for-blocking-all-nintendo-servers.516234/

WRO · Dec 22, 2018

Draxzelex said:
https://gbatemp.net/threads/90dns-dns-server-for-blocking-all-nintendo-servers.516234/

Thanks. I ended up just updating my Switch 6.2 w/ exFAT support. You mentioned corruption, but it is just more
convenient for me to use exFAT. If anything I did a backup of my RAW eMMC + BOOT 0 /1. Should it should
be fine. I think ReiNX 2.0 has been released man, are you sure it is unofficial? Anyways I will use Atmosphere
as a friend in Discord recommended it, because it has more anti-banning tools. ¯\_(ツ)_/¯

Draxzelex · Dec 22, 2018

WRO said:
Thanks. I ended up just updating my Switch 6.2 w/ exFAT support. You mentioned corruption, but it is just more
convenient for me to use exFAT. If anything I did a backup of my RAW eMMC + BOOT 0 /1. Should it should
be fine. I think ReiNX 2.0 has been released man, are you sure it is unofficial? Anyways I will use Atmosphere
as a friend in Discord recommended it, because it has more anti-banning tools. ¯\_(ツ)_/¯

ReiNX 2.0 hasn't been released officially yet.

WRO · Dec 22, 2018

Draxzelex said:
ReiNX 2.0 hasn't been released officially yet.

Must be internal beta then?
https://github.com/Reisyukaku/ReiNX/commit/032e5c244b072ce81cf271cceea2676284f6ddb8

Draxzelex · Dec 22, 2018

WRO said:
Must be internal beta then?
https://github.com/Reisyukaku/ReiNX/commit/032e5c244b072ce81cf271cceea2676284f6ddb8

Or for those who are competent at compiling straight from the source.

Hacking SWITCH NOOB PARADISE - Ask questions here

00000780 00000438

Well-Known Member

Well-Known Member

00000780 00000438

Well-Known Member

Well-Known Member

Well-Known Member

00000780 00000438

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Similar threads

Popular threads in this forum