Yes, give it some tries. Lemme know if It was helpful!
Inviato dal mio Nexus 5X utilizzando Tapatalk
Wooohoo! I dont know why, but it works! Backuped the SD Card. Formatted it. (no problems there) copied everything back, except one old nand backup. Booted emunand with cfw. And it works without any problems! Strange Bug!
... Everyone with the black screen boot problem - how much space on the sd was left?
What tool do you use to do that?
I have got 6.0.0 emu nand to boot, after doing emu nand 3 times with black screen. I looked about, simple is make a backup of Boot0.bin and boot1.bin (you should have these before playing with emunand!).Seems to be a Firmware Issue i think.... Everyone with 6.x got Blackscreen
Had the same problem as not being able to boot emunand (black screen). This is what I did to fix the issue:
*In SX OS boot menu, go to the nand back up option and select dump nand.
*On the next menu, press advanced options and enable only "boot0" and "boot1"(other options should be disabled).
*Do a nand backup of the selected files. Should only take a few seconds.
*Turn off your switch and place your SD card on your PC
*Browse to "sxos/backup/" folder.
*Copy "boot0" and "boot1", then browse to "sxos/emunand/" folder.
*Paste and replace your copied files.
*Now try to boot emunand normally as you would before.
That fixed my black screen issue. Hope that others can fix their emunand as well.
Had the same problem as not being able to boot emunand (black screen). This is what I did to fix the issue:
*In SX OS boot menu, go to the nand back up option and select dump nand.
*On the next menu, press advanced options and enable only "boot0" and "boot1"(other options should be disabled).
*Do a nand backup of the selected files. Should only take a few seconds.
*Turn off your switch and place your SD card on your PC
*Browse to "sxos/backup/" folder.
*Copy "boot0" and "boot1", then browse to "sxos/emunand/" folder.
*Paste and replace your copied files.
*Now try to boot emunand normally as you would before.
That fixed my black screen issue. Hope that others can fix their emunand as well.
Are your sysNand and emuNand on the same firmware?didnt work for me. still black screen
Are your sysNand and emuNand on the same firmware?
I had the same problem and this is what I did:
Just copy the boot.dat from an old SX OS 2.0.1 that doesn't use emunand from SD.
The new SX OS 2.3 copy the 2nd NAND to SD card but the 2nd NAND is always here. It's just a copy, not a move.
So if you have a blackscreen with SD emunand, roll back to previous SX OS and check if your NAND EMUNAND is still booting.
If yes, delete emunand folder from your SD card and make a new copy with sx os 2.3
I had the same problem and this is what I did:
Just copy the boot.dat from an old SX OS 2.0.1 that doesn't use emunand from SD.
The new SX OS 2.3 copy the 2nd NAND to SD card but the 2nd NAND is always here. It's just a copy, not a move.
So if you have a blackscreen with SD emunand, roll back to previous SX OS and check if your NAND EMUNAND is still booting.
If yes, delete emunand folder from your SD card and make a new copy with sx os 2.3