- Status
Yes i’ll check several path and name variations in a next CL.
Would be cool if there was a skin or theme that made it look like the original Directory Opus on Amiga.
One suggestion is to have a dOPUS directory inside the "switch" folder, that way the dOPUS.nro can also be in it together with the keys so less clutter inside the switch folder too.
Quick question: would there be any reason why a game that used to not require a software update (when being used as an .xci) is now asking for one? I've tried removing the software through the Switch's built-in software removal setting, but I'm still receiving this prompt. Launching this particular title as an .xci yields the same results. Any insight into this problem would be greatly appreciated.
Network installation is an expected future implementation, correct? I'm very excited for this piece of software, it looks very promising! Cheers for the effort you've put into this!
Just use DZ !! Its faster then everything out there. Plus tinfoil is going to be close source now
I posted this in the Hekate thread but haven't gotten any replies, perhaps I could get some advice here. Here's the original post from the other thread:
I'm trying to dump my fuses and tsec_keys, but I wanted to double check something because I'm scared of bricking my Switch.
Starting on 6.0.0, I loaded up ReiNX for my Switch's first dive into homebrew. I have installed my own game's backups and enabled AutoRCM through ReiNX. I read that I can only dump my fuses and tsec_keys with Hekate, not ReiNX, and I wanted to make sure that I would do this process correctly before continuing. Please let me know if this is correct, I would really appreciate it
Power off Switch (AutoRCM still enabled), remove sd card, install Hekate v4.2, insert sd card and use Tegra to inject the Hekate .bin file.
In Hekate, I click "AtmoHB" and then I assume that takes me to my Switch's home screen. From there, I go to System Settings.
In there, for fuses, I go to Console Info, Print fuse info, then tap/release the power button once. After that, I go back to Console info, then go to Print Tsec keys, then tap/release the power button once.
After that, I shut down the Switch, then use Tegra to inject ReiNX again.
Are my steps safe? Can I leave AutoRCM enabled through ReiNX through this entire process?
I'm trying to dump my fuses and tsec_keys, but I wanted to double check something because I'm scared of bricking my Switch.
Starting on 6.0.0, I loaded up ReiNX for my Switch's first dive into homebrew. I have installed my own game's backups and enabled AutoRCM through ReiNX. I read that I can only dump my fuses and tsec_keys with Hekate, not ReiNX, and I wanted to make sure that I would do this process correctly before continuing. Please let me know if this is correct, I would really appreciate it
Power off Switch (AutoRCM still enabled), remove sd card, install Hekate v4.2, insert sd card and use Tegra to inject the Hekate .bin file.
In Hekate, I click "AtmoHB" and then I assume that takes me to my Switch's home screen. From there, I go to System Settings.
In there, for fuses, I go to Console Info, Print fuse info, then tap/release the power button once. After that, I go back to Console info, then go to Print Tsec keys, then tap/release the power button once.
After that, I shut down the Switch, then use Tegra to inject ReiNX again.
Are my steps safe? Can I leave AutoRCM enabled through ReiNX through this entire process?
I would not trust anyone with a TX's logo as profile pick and who defended TX after the RA's Switch thing.
No, you had not just one but 2 replies.I posted this in the Hekate thread but haven't gotten any replies, perhaps I could get some advice here. Here's the original post from the other thread:
I'm trying to dump my fuses and tsec_keys, but I wanted to double check something because I'm scared of bricking my Switch.
Starting on 6.0.0, I loaded up ReiNX for my Switch's first dive into homebrew. I have installed my own game's backups and enabled AutoRCM through ReiNX. I read that I can only dump my fuses and tsec_keys with Hekate, not ReiNX, and I wanted to make sure that I would do this process correctly before continuing. Please let me know if this is correct, I would really appreciate it
Power off Switch (AutoRCM still enabled), remove sd card, install Hekate v4.2, insert sd card and use Tegra to inject the Hekate .bin file.
In Hekate, I click "AtmoHB" and then I assume that takes me to my Switch's home screen. From there, I go to System Settings.
In there, for fuses, I go to Console Info, Print fuse info, then tap/release the power button once. After that, I go back to Console info, then go to Print Tsec keys, then tap/release the power button once.
After that, I shut down the Switch, then use Tegra to inject ReiNX again.
Are my steps safe? Can I leave AutoRCM enabled through ReiNX through this entire process?
I'm not taking Tinfoil closed source, I'm just keeping USB installs private until the GUI is complete. That quote is kinda out of context.
Actually the 3 ones have its own porpuse, Tinfoil Is explícity just a title manager, dOPUS Is an on-console NSP/XCI management tool and DZ is a networking title installer (see it as a local-hosting FreeShop). I cannot say dOPUS nor DZ are just variations of tinfoil.
Last edited by Billy Acuña,
exactly which is why i said its the best FOR ME
i have it set up with remote and local FTP connections to my home NAS so i can install games from anywhere at 30+ MBps
Last edited by jakkal,
- Status
Similar threads
-
- Question
-
The Real Jdbye
*is birb* -
Dumpflam
-
-
-
-
@
BakerMan:
Update on my brother: He's home now, tired and hungry, obviously, but other than that, seems to be doing fine.+2 -
-
-
@
BakerMan:
Well, from what I've heard from my parents, he had a seizure last night, perhaps an epileptic episode, fucking died, had a near death experience, my dad called the paramedics, they showed up, took him to the hospital, and he woke up covered in tubes, and started complaining.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
