It gets even better: anyone can buy me a beer now... If they want https://github.com/CTCaer/hekate/blob/master/bootloader/libs/elfload/elfreloc_arm.c#L1Woke up to the update tweet from CTCaer. Can't wait to try it.
Awesome work as always.
Wheres my shrek now?
Sir i understand that but a new comer may not, I also notice or have not noticed that there is no mention of payloads in the ini, so how does one launch the payloads in the payloads folder with hekate ?
Thank you
Make a entry like any other
Lakka example:
Code:[Lakka] payload=lakka/boot/coreboot.rom logopath=lakka/boot/splash.bmp
Thank you very much not stated on main page or given example in template.ini
Just what i needed to know
I also get black screen trying to run sx os, have latest files and hekate 4
Solution please ? Besides running normally , how to run through hekate ?
Thanks @CTCaer! Just took the plunge and switched from SX OS to Hekate exclusively! I can't wait for my SwitchMe to come, as this coupled with it will be an amazing setup. Also glad to see how easy @natinusala's Lakka port is to install as well now, copy-pasting files and it just werking... Yum.
Payloads can be launched 2-ways.
Either have them in bootloader/payloads/ and they will show up in Launch->Payloads (currently it needs at least hekate_ipl.ini in bootloader/) or by using the payload= entry for boot entry.
Or both (having ini point to bootloader/payloads/payload.bin).
2nd option gives you the benefit of autobooting that payload.
EDIT:
Also as stated, the guide will be updated later. No time available now.
Either have them in bootloader/payloads/ and they will show up in Launch->Payloads (currently it needs at least hekate_ipl.ini in bootloader/) or by using the payload= entry for boot entry.
Or both (having ini point to bootloader/payloads/payload.bin).
2nd option gives you the benefit of autobooting that payload.
EDIT:
Also as stated, the guide will be updated later. No time available now.
if I want the autoboot to immediately load the fusee payload
Do i set autoboot=1 at .ini?
Where in the .ini do I put the "bootloader\payloads\atmosphere_fusee-primary.bin" part?
or is it autoboot=bootloader\payloads\atmosphere_fusee-primary.bin
Do i set autoboot=1 at .ini?
Where in the .ini do I put the "bootloader\payloads\atmosphere_fusee-primary.bin" part?
or is it autoboot=bootloader\payloads\atmosphere_fusee-primary.bin
Actually for now fusee is broken on newer firmware. So you want to use hekate and create a new config for it.
I just leave autoboot at 1 since the only CFW on the config is Barebones atmosphere?
Sorry of this seems a stupid question, but I'd like to know if I understand the 1st improvement correctly.
"Added Payload launching. Supports: All current CFW bootloaders, Linux chainloading and payload tools."
The Payload is the .bin file we send to the Switch using TegraSmash right? Such as hekate_ctcaer_3.2.bin?
But we still need to use a PC (or phone) to send the Payload to the Switch I assume, so what is different about this?
"Added Payload launching. Supports: All current CFW bootloaders, Linux chainloading and payload tools."
The Payload is the .bin file we send to the Switch using TegraSmash right? Such as hekate_ctcaer_3.2.bin?
But we still need to use a PC (or phone) to send the Payload to the Switch I assume, so what is different about this?
- Joined
- Jun 24, 2007
- Messages
- 12,007
- Trophies
- 3
- Location
- In the Murderbox!
- Website
- www.twitch.tv
- XP
- 16,143
- Country
Kind of like SX OS in which you can launch various payloads from your SD card so you don't have to worry about switching out the files in tegrarcmsmash or whatever dongles you may or may not have
it means we can launch other payloads from within hekate
But does not load sx os yet unfortunately
Last edited by Canna,
@CTCaer ....Ok so we have all these various usb injectors showing up which was to be expected. Teamx indicated they might support a USBA dongle device to keep in your dock. I use my switch about 70/30 docked so with autoRCM that sounds like a great coldboot solution for my needs.
We use Switch in portable mode when using usb injection. from what you know how does Switch behave when docked in rcm mode and could a payload be sent from the USB-A dock port (which I assume is just a usb hub)?
We use Switch in portable mode when using usb injection. from what you know how does Switch behave when docked in rcm mode and could a payload be sent from the USB-A dock port (which I assume is just a usb hub)?
Similar threads
- No one is chatting at the moment.
-
-
@
Sonic Angel Knight:
Or, I also heard that if you use flash memory, it can act as more "RAM" at least windows tell me when I stick a flash drive into it. -
-
-
-
-
-
-
-
-
-
-
-
-
-
-
@
K3Nv2:
I can think of the design teams process another joystick and no audio or a joystick and mono audio -
-
-
-
-
-
-
-
