[RCM Payload] Hekate - CTCaer mod

Discussion in 'Switch - Exploits, Custom Firmwares & Soft Mods' started by CTCaer, May 1, 2018.

  1. CTCaer
    OP

    CTCaer Developer

    pip Developer
    11
    Mar 22, 2008
    Greece
    Yes it's supported. Every open source is.
    Never tried that. But I don't have time to glue a usb A port..
    autoboot's number chooses by order of [] entries in your ini. If you have 3 [] entries and autoboot=2 it will autoboot 2nd option.

    Make sure to check readme in github. It has more info.


    Fusee atmo launching is broken btw because of exosphere. It's confirmed that hekate can load these kips: loader, sm, pm, boot_200 (for fw 2.X.X and up) or boot_100 (for fw 1.0.0) with ninty's secmon.
     
    Skonikol and wicksand420 like this.
  2. mariogamer

    mariogamer GBAtemp Maniac

    Member
    5
    Aug 12, 2015
    Canada
    Actually it is fusee that fails on 4.x+.
    Source: https://github.com/Atmosphere-NX/Atmosphere/issues/194#issuecomment-415177775
    So exo itself will work fine.

    I don't think that's possible. Everything (almost) is disabled in RCM. So it won't detect RCM. And it's not an issue (just put it back afterward).
     
  3. Quicksilver88

    Quicksilver88 GBAtemp Advanced Fan

    Member
    4
    Jan 26, 2013
    United States
    I know, it would just be handy.....actually I have that Nintendo portable charge stand, I connect that to my PC and have tegrasmash active and then I can just inject the payload by dropping in that stand. Really, in most cases I don't reboot the unit that much, just when loading stuff up or playing around with new HB
     
  4. Skonikol

    Skonikol GBAtemp Regular

    Member
    4
    May 25, 2017
    Russia
    Muhosransk
    @CTCaer Please tell me, what exactly is lp0 responsible for?
    What is lanos and where you can read about it. Thank you!
     
    Last edited by Skonikol, Aug 24, 2018
  5. CTCaer
    OP

    CTCaer Developer

    pip Developer
    11
    Mar 22, 2008
    Greece
    So you clearly missed any guide and readme even though you know these names.
    Check github, for now.
     
  6. 877

    877 GBAtemp Regular

    Member
    3
    Mar 8, 2017
    United Kingdom
    Great idea!
     
  7. Joxley192

    Joxley192 Advanced Member

    Newcomer
    3
    Feb 22, 2018
    United Kingdom
    Can u get sx-os running on 4.0 cause I like to use different cfw and just can't seem to get sx-os running
     
  8. Canna

    Canna Bad Ass Poisonous Mushroom

    Member
    7
    GBAtemp Patron
    Canna is a Patron of GBAtemp and is helping us stay independent!

    Our Patreon
    Jul 14, 2018
    United Kingdom
  9. hippy dave

    hippy dave BBMB

    Member
    15
    Apr 30, 2012
    United Kingdom
    Nice update, thanks.

    Now this supports payload chainloading, would someone feel like building a cut-down version that does one thing only, no menus etc, just immediately loads a specifically named payload from the sd? Would be a very neat option for modchips and maybe dongles. I could have a crack at it myself, but I imagine it would be much quicker for someone who already knows the code and has the build environment set up.
     
  10. CTCaer
    OP

    CTCaer Developer

    pip Developer
    11
    Mar 22, 2008
    Greece
    I already said that I'm going to support 128KB modchips.
     
  11. hippy dave

    hippy dave BBMB

    Member
    15
    Apr 30, 2012
    United Kingdom
    That's cool, I just think it's about time we have a plain chainloader that just does that and nothing else.
     
  12. CTCaer
    OP

    CTCaer Developer

    pip Developer
    11
    Mar 22, 2008
    Greece
    It will still not be plain.
    It'll be the full hekate experience. It's just that many of its guts will be in the sd card.

    EDIT:
    Also don't forget that flash it and forget is already supported in hekate v4 for modchips.
    It automatically gets a new hekate version in bootloader/update.bin if it's found and it's newer.
     
    Last edited by CTCaer, Aug 24, 2018
    wicksand420 likes this.
  13. Skonikol

    Skonikol GBAtemp Regular

    Member
    4
    May 25, 2017
    Russia
    Muhosransk
    If I could find the information I need in these documents, I would not ask a question here. Sorry if I bothered you.
     
  14. CTCaer
    OP

    CTCaer Developer

    pip Developer
    11
    Mar 22, 2008
    Greece
  15. DCG

    DCG GBAtemp Advanced Fan

    Member
    5
    Jan 1, 2010
    Netherlands
    Schiedam
    @CTCaer
    I'm not sure if this is the correct place for this...

    I made a full backup of both Boot0/1 and Raw GPP (took it's time even though I only have 4 games installed 0.o)
    I booted Atmosphere (hekate) and entered the HBmenu, but I mistakenly held R, it generated a 2011-0301 Error (nintendo's own database doesn't respond to it, some claim it's wifi related, others controller/USB related).
    When I looked at what was shown in the switch's "visible" log under settings on the regular 4.1 firmware, I only saw some game and older stuff (no 2011-0301's).

    Does version 4 of CTCaer Hekate redirect errors?
    Should I restore a backup, if so, which file would contain the error log?
    The only thing I did afterwards was make a backup of my saves with Checkpoint.
    The system hasn't been online in over 3 months and error reporting is off.

    I was planning on going online to update for monster hunter Generations Ultimate
     
  16. mariogamer

    mariogamer GBAtemp Maniac

    Member
    5
    Aug 12, 2015
    Canada
    Which cfw/pack are you using? If it is reinx/sdfiles (both updated) then the error is redirected to the sd card.
     
    Last edited by mariogamer, Aug 25, 2018
  17. CTCaer
    OP

    CTCaer Developer

    pip Developer
    11
    Mar 22, 2008
    Greece
    2011-0301: IPC - Remote process is dead

    You probably don't have the error because you use sdfiles that have atmo's new custom error report which disables nintendo's.
    So you are safe. Lucky you.
     
  18. Gamer4Lyfe

    Gamer4Lyfe Member

    Newcomer
    4
    May 18, 2018
    United Kingdom
    Hi noob question, I’ve downloaded sdfiles but there is no longer an option to let me clear error logs. Is there a way to still do this? And yes I know there’s always files that remain, just wanted to know if the option has been removed as I couldn’t see it. Thanks.
     
  19. CTCaer
    OP

    CTCaer Developer

    pip Developer
    11
    Mar 22, 2008
    Greece
    Well here's the wrong thread. Also the answer is already above you.
    This sysmodule is deprecated and instead creport is used.
    (It disables Nintendo's error reporting and enables atmosphere's custom sd report.)
     
    wicksand420 likes this.
  20. re.lax

    re.lax GBAtemp Regular

    Member
    6
    Apr 5, 2009
    United States
    United States, Texas
    How exactly would on set the archive bit on the Nintendo folder if someone may have unset it.
    Thanks.
    Edit: I figured it out, silly mistake.
     
    Last edited by re.lax, Aug 25, 2018
Quick Reply
Draft saved Draft deleted
Loading...