Hacking [SUPPORT] rxTools Official technical support thread

JagN9 · Jan 4, 2016

I was using an old build of rxTools (very early 3 I believe, or very last 2.6), I updated it and now emunand is not booting (black screen). Any reasons for this to happen?

EDIT: Okay, it wont load rxMode, not in sysnand nor emunand. Tried different rxTools 3 builds.

hahaha1234 · Jan 4, 2016

i've been running v2,6 too and when I tried to install FBI on emunand it says it was good, but when I try to launch rxmode in emunand I get an error.
Also when I open rxtools it does that thing where it downloads files to boot faster, I get "FAIL! ERR -2" what is the problem?

Elucidate · Jan 4, 2016

Hokay, so I HAD rxTools working last night but for some reason now it's either just sitting at a black screen or giving an SD card error. I tried restoring my emuNAND to my working backup to no avail and am starting to think it may be an issue with the build I'm using or my SD card itself. Any help/info/suggestions appreciated.

EDIT: I'm able to boot into systemNAND with rx running but when I do so it crashes theme.

Piluvr · Jan 4, 2016

can I change the boot so that by holding L it loads the menu?

artins90 · Jan 5, 2016

Hi guys, I have just downgraded from 10.3 and after creating an emunand I am trying to install rx tools. The first time the installation opened just fine and completed successfully but it got stuck at the end after the installation completed message it asked me to press any key but it was just stuck. I turned the ds off and now the installation gives me a black bottom screen while if I hold the L button while booting it takes me to the option menu. If I try to reboot in emunand the rxtools application gets stuck on the RXMODE IS BOOTING screen. Do you have the latest build available? All the links in the guides are down.

DesuIsSparta · Jan 5, 2016

artins90 said:
Hi guys, I have just downgraded from 10.3 and after creating an emunand I am trying to install rx tools. The first time the installation opened just fine and completed successfully but it got stuck at the end after the installation completed message it asked me to press any key but it was just stuck. I turned the ds off and now the installation gives me a black bottom screen while if I hold the L button while booting it takes me to the option menu. If I try to reboot in emunand the rxtools application gets stuck on the RXMODE IS BOOTING screen. Do you have the latest build available? All the links in the guides are down.

https://mega.nz/#!P8tkDB5I!cM1ji0HYs7LMAdQgjtRMyDxq8fy8aE_sWwWjjdTWI0Y

cristian321 · Jan 5, 2016

hello all, i downgraded from 10.3 and installed emunand succesfully, now I'm trying to run rxtools 3.0 but it always fails when initializing for the first time, even tough I have the firm folder with the .cia files that i got with the python tool. what should i do?

Deleted member 373223 · Jan 5, 2016

i can't go to the rxtools menu with "r"

Slattz · Jan 5, 2016

So when I try to launch rxTools with menuhax and ctrbootmanager, I got the installing files thing then when it tries to boot into emunand, i'm greeted by an endless black screen. However, when I use the rxTool Launcher from the web browser, it will boot into the emunand fine. Is there something wrong with the code.bin? Or do I not have the files in the right folders? I can get into the rxtools menu on both and I have a o3ds on v9.2. Thanks.

PrinceofFairies · Jan 6, 2016

FIXED IT MYSELF. I was missing some files.

I downgraded my O3DS from 10.3 to 9.2 successfully. I'm using Cubic Ninja to install, so I'm following the "Users with only Cubic Ninja or Sky3DS loaded with a Cubic Ninja ROM" one.

I download EmuNAND9 and put Launcher.dat on the root of my SD card and go to the website, go.gateway-3ds.com, then this message pops up:

Sorry if it's blurry.

Basically, from what I am reading and watching, this message is not suppose to pop up, but instead something else where you can scroll through and press "Backup system NAND."

Do I need to format my SD card?

And a totally unrelated question to this problem. After I install rxTools. If I'm not using menuhax, I can use a custom theme, correct?

hmr1 · Jan 6, 2016

i get a error everytime i try to update emunand

is this normal? just keep trying?

halloworld · Jan 7, 2016

is xorpad generating broken innew version??

its generat only one file with ugly china name

richardparker · Jan 7, 2016

what is the mset exploit? how do i install it? and how can i play ds games on my 3ds with it? help. i have sysnand 9.2 ,emunand 10.3,rxtools with pasta.

JagN9 · Jan 7, 2016

richardparker said:
what is the mset exploit? how do i install it? and how can i play ds games on my 3ds with it? help. i have sysnand 9.2 ,emunand 10.3,rxtools with pasta.

1.- An exploit for NDS flashcards.
2.- FBI can do it, I think.
3.- You can't, unless you have a compatible NDS flashcard.

Someone check if I'm wrong, please.

richardparker · Jan 8, 2016

JagN9 said:
1.- An exploit for NDS flashcards.
2.- FBI can do it, I think.
3.- You can't, unless you have a compatible NDS flashcard.

Someone check if I'm wrong, please.

ok thanks!

neokombat · Jan 10, 2016

Sometimes rxtools just boots a black screen i'm on 9.2 and using 3.0 and loading it on ninjahax.one more thing it boots to emunand but doesent aways have RX-E in system menu is this normal

DinckelMan · Jan 10, 2016

I've successfully installed rxTools 3 on an o3DS XL (9.2E), but i have a.. problem?

I boot into rxMode no problem, but when i open System Settings (shows RX-E 9.2) and close it back, it boots into sysNAND instead of emuNAND and disables rxMode back.

Any ideas why?

vizard22 · Jan 11, 2016

I can boot rxtols fine, but for some reason i cant enter dev mode. does anyone know why??

Roboman · Jan 13, 2016

I am having trouble setting up RX-tools on my newly downgraded N3DS. I managed to backup my sysnand with emunand9 so that means the downgrade was successful and complete, right?
Anyways, sometimes when I launch RX-tools it freezes on a black scree, sometimes it freezes with the nice RX-tools theme on the top screen with a blank bottom screen, and sometimes it loads up but when i try to boot rx mode it says failed to load native firm:4
Any help would be appreciated.

DinckelMan said:
I've successfully installed rxTools 3 on an o3DS XL (9.2E), but i have a.. problem?

I boot into rxMode no problem, but when i open System Settings (shows RX-E 9.2) and close it back, it boots into sysNAND instead of emuNAND and disables rxMode back.

Any ideas why?

that's normal. exiting system settings reboots the system, and without RX tools to guide it, it reboots into unpatched sysnand. consider setting up cold boot with menuhax.

Igneko · Jan 13, 2016

Hi guys i have a little problem and its driving me crazy.

I installed rxtools using the recent downgrade method.

Last night i was playing Pokemon Shappire with no problems , turned off my 3DS, and this morning when i tried to launch rxtools the browser failed and an error message was displayed "failed to load part of this page".

Did something change magically while my 3DS was turned off? its giving me the same error every time.

Hacking [SUPPORT] rxTools Official technical support thread

Well-Known Member

Active Member

Member

Yeeeet

New Member

Well-Known Member

Member

Pink = Best colour

Easygoing Fairy

Member

Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Member

Your Favorite Water Mage!

Member

Well-Known Member

New Member

Similar threads

Popular threads in this forum