Try using the alternate EU save from here: http://gbatemp.net/threads/howto-use-oot-exploit-on-sky3ds-non-working-carts.383581/
Try using the alternate EU save from here: http://gbatemp.net/threads/howto-use-oot-exploit-on-sky3ds-non-working-carts.383581/
So I am installing RxTools to run gba games, and I am confused. I read that I will need to patch agb_firm, so do I need to do this to both sysnand and emunand? I have unlinked nands and I want to play them on emunand. I have also read that you dont need to patch it anymore, all I have to do is install the gba .cia's? Sorry for my confusion
Yup. I'm EUR, installed EUR. The only thing is that I was running rxMode, because as previously said, I have no other way of accessing my emuNAND.
I took a backup on my nand 8.8. The 3ds was updated to 9.9 by mistake.
Is there anyway (non hardware) to restore it to 8.8? The gateway launcher will not launch. And i can't find anything to tell me how to do it
Is there anyway (non hardware) to restore it to 8.8? The gateway launcher will not launch. And i can't find anything to tell me how to do it
Hardmod onlyI took a backup on my nand 8.8. The 3ds was updated to 9.9 by mistake.
Is there anyway (non hardware) to restore it to 8.8? The gateway launcher will not launch. And i can't find anything to tell me how to do it
--------------------- MERGED ---------------------------
Is there a way to register street pass for games from a different region from emunand?
Hey so my brother updated my 3ds to 9.5.0-23 today . I'm wondering if I buy a gateway and install emumand is that possible or does their need to be another update? Or is there a way to downgrade to like 9.2 for example or something?
. I'm wondering if I buy a gateway and install emumand is that possible or does their need to be another update? Or is there a way to downgrade to like 9.2 for example or something?
I have Smash Bros and its DLCs on GW and have no issue with it. Were you getting black screens before installing the DLCs? What is your current emuNAND version?
If you are on an O3DS then you can update your emuNAND without issue (always make a backup just in case though). If you are on an N3DS, the highest your firmware can go is 9.5.0-23. You will have to find the update online (there's a certain iso site that has it) and install them via the downloaded .cia files.
Guys, got a 3ds ver 4.5, installed rxtools, emunand and did nand unlink (sysnand format). Is it already safe to update emunand to latest version by system menu or i need to do/wait something else?
Once your system is past 9.2, you cannot downgrade without a hardware mod. You will also have to have a backup of your system NAND that you made before updating. You cannot use a backup from another system. If you have not made a backup, then you are going to be out of luck with that system. (You can still use a Sky3DS, but there's currently a new anti-piracy system that defeats it, so you might want to wait until the Sky3DS team addresses the issue before buying one.)Hey so my brother updated my 3ds to 9.5.0-23 today
I have a 9.4.0-21J version 3DS LL and have Cubic Ninja (AU/EU) running fine via Regionthree (Go! Android).
1. Can I use Cubic Ninja in this way to load Ninjhax and
2. If so, is there an Android server to load Ninjhax so I do not have to go online with my console? (I do not know all of the Japanese Nintendo update servers and do not want to risk my console updating).
1. Can I use Cubic Ninja in this way to load Ninjhax and
2. If so, is there an Android server to load Ninjhax so I do not have to go online with my console? (I do not know all of the Japanese Nintendo update servers and do not want to risk my console updating).
1. Yes, you can use Cubic Ninja to load Ninjhax 2.0.
2. No, you must connect to the internet to download the payload for Ninjhax the first time. After you do this, you do not need to connect to the internet again to use Ninjhax. Connect to the internet, set up Ninjhax, delete the internet connection, done!
In case you didn't know, your 3DS will only automatically download updates if you put your 3DS into sleep mode while connected to the internet. Just avoid going into sleep mode while setting up Ninjhax and there's no risk of downloading an update.
Ahh brilliant. No I didn't know that, thank you.
Edit: Did not work. It would not accept the QR as a Japanese version console. I suspected there was a difference in the save as the JP version of Cubic Ninja is a download. I swapped the QR to EU, it installed immediately, however the homebrew loader results in a crash. Upon reload, accessing the homebrew loader still results in a crash.
Re-edit: Smea confirmed it will not work.
Last edited by SweetieBelle,
I asked this question before, but I'm still a little confused.
I installed a CIA and it only appears on my sysNand. How do I get it to show up on emuNand as I don't want to mess with my sysNand more than I have to.
Also, what is the preferred usage for both Sysnand and EmuNAnd?
I installed a CIA and it only appears on my sysNand. How do I get it to show up on emuNand as I don't want to mess with my sysNand more than I have to.
Also, what is the preferred usage for both Sysnand and EmuNAnd?
Hi, couple of questions:
1.) When I boot into Gateway Emunand through the DS profile exploit am I correct in thinking its a different Emunand then when booting into rxTools through the browser exploit? Are they the same?
2.) If I install the DS profile exploit for rxTools, how do I enter into the Gateway menu? Do I just swap the launcher on the sd card?
3.) Whenever I boot into either Gateway Emunand or rxTools Emunand my home screen layout changes, and I have to load the saved layout. Not a big issue, just a minor inconvenience i guess. Any way for it to automatically load my layout upon boot?
4.) Can I do the ninjahax exploit with a Gateway instead of a sky3DS or Cubic Ninja?
*I have an O3DS with a Gateway on 4.5 sysNand and 9.9.0-26 Emunand (both Gateway and rxTools).
Thanks!
1.) When I boot into Gateway Emunand through the DS profile exploit am I correct in thinking its a different Emunand then when booting into rxTools through the browser exploit? Are they the same?
2.) If I install the DS profile exploit for rxTools, how do I enter into the Gateway menu? Do I just swap the launcher on the sd card?
3.) Whenever I boot into either Gateway Emunand or rxTools Emunand my home screen layout changes, and I have to load the saved layout. Not a big issue, just a minor inconvenience i guess. Any way for it to automatically load my layout upon boot?
4.) Can I do the ninjahax exploit with a Gateway instead of a sky3DS or Cubic Ninja?
*I have an O3DS with a Gateway on 4.5 sysNand and 9.9.0-26 Emunand (both Gateway and rxTools).
Thanks!
Hi
I'm really struggling with setting up a R4i Gold Deluxe on a 3DS with firmware 4.5. Where is the best place to post to ask for help without getting on anyone's nerves?
Thanks
I'm really struggling with setting up a R4i Gold Deluxe on a 3DS with firmware 4.5. Where is the best place to post to ask for help without getting on anyone's nerves?
Thanks
Heya.
I've got a question about Old3DS this time around.
What is generally considered to be the best/safest non Gateway emunand CFW with .cia and multi-region support for 9.2 O3DS? An easy boot with profile exploit would be ideal. I also would something that allowed me to play NDS flashcarts like R4 on the Old 3DS without having to redo exploit steps like on 4.5, if possible.
On a not entirely unrelated question; does anyone know if Reinand 2.0 still supports Old3DS, or is it just N3DS now?
Thanks.
I've got a question about Old3DS this time around.
What is generally considered to be the best/safest non Gateway emunand CFW with .cia and multi-region support for 9.2 O3DS? An easy boot with profile exploit would be ideal. I also would something that allowed me to play NDS flashcarts like R4 on the Old 3DS without having to redo exploit steps like on 4.5, if possible.
On a not entirely unrelated question; does anyone know if Reinand 2.0 still supports Old3DS, or is it just N3DS now?
Thanks.
So, I can get a R4i SDHC Dual Core for cheap (only flashcart I can get at the moment in my country, i'd buy a DSTWO if I could), but i'm slightly worried about something. I've read in various places that they stop working in a year, but that it can be patched. Is this true?
It's the one from this website: http://r4isdhc.com/
It's the one from this website: http://r4isdhc.com/
Scored a 6.2.0-12U Firmware O3DS at a pawnshop. Looking for guidance on the best CFW option for me. I would like to:
- Install eShop ROMs
- Emulate NES/SNES/GBA
- Use 9.2 Firmware to use PkHex web injection
My bad. I had assumed Ninjhax 2.0 would work with all regions (within the compatible version range). Did Smea ever state if he would fix the issue?Ahh brilliant. No I didn't know that, thank you.
Edit: Did not work. It would not accept the QR as a Japanese version console. I suspected there was a difference in the save as the JP version of Cubic Ninja is a download. I swapped the QR to EU, it installed immediately, however the homebrew loader results in a crash. Upon reload, accessing the homebrew loader still results in a crash.
Re-edit: Smea confirmed it will not work.
Similar threads
-
-
@
Psionic Roshambo:
Some sort of police thing going on near me lol "Get out of the car with your hands up and walk backwards towards us" over a loud speaker thing -
-
-
-
-
-
-
-
-
-
-
-
-
-
@
Julie_Pilgrim:
@Psionic Roshambo i have 16 gb in my pc and i run into issues with ram more than i'd like to admit -
-
-
-
-
-
@
Sonic Angel Knight:
Or, I also heard that if you use flash memory, it can act as more "RAM" at least windows tell me when I stick a flash drive into it. -
-
-
