Hacking SSBB CFG USB Loader

Fellow · Oct 10, 2009

I've searched through the forums and haven't found a straight forward answer.

I'm using Configurable USB Loader v43, when I play SSBB, the game freezes only on the cutscene played after classic mode is finished, any movie that's played from the menu, and after I defeat Kirby in the first match of Subspace.

I have installed Hermes 233 like the readme file recommended but the game fails on mload and yload.

pepxl · Oct 10, 2009

which rev and what merge options, the game should play fine if ripped with 222/223 not 249 rev 14 and make sure your using IOS 222/223 for booting the game but your best setting it as default IOS in the global options, i think 249 rev 14 has a bug which doenst allow 100% IOS reloading all of the time for 222/223 using loaders

duy64 · Oct 10, 2009

You have cIOS 222/233 installed, but did you select them in the loader ?

Fellow · Oct 10, 2009

I've booted the game using, mload 222, mload 223, 249, and 250, and the game hangs on all 4 settings when I try to watch cinemas.

I'll try ripping the game again using 222/223.

LxTrix · Oct 10, 2009

I have cios rev 14 and for some reason when i copied the game onto the hard drive it disappeared.

Fellow · Oct 11, 2009

Here's the situation, I'm using cIOS rev 24 (IOS249), with 4.0 firmware.

I'm trying to run Super Smash Brothers Brawl patched with IOS Patcher with IOS30, the game is 6.95GB in size.

With the CFG USB Loader:

Ran with:
222mload - screen turns black if movie is played, cannot view trophies, cannot view subspace cutscene after Kirby match.
223mload - screen turns black if movie is played, cannot view trophies, cannot view subspace cutscene after Kirby match.
249 - screen turns yellow with green text (There is a problem, reset the Wii or read the manual, etc.) if movie is played, cannot view trophies, cannot view subspace cutscene after Kirby match.
250 - screen turns yellow with green text (There is a problem, reset the Wii or read the manual, etc.) if movie is played, cannot view trophies, cannot view subspace cutscene after Kirby match.

With the NeoGammaBetaR8:
screen turns yellow with green text (There is a problem, reset the Wii or read the manual, etc.) if movie is played, cannot view trophies, cannot view subspace cutscene after Kirby match.

pepxl · Oct 11, 2009

your patching the game?

that might be your problem, dont patch it but still use cios 222/223 to load the game

Fellow · Oct 11, 2009

pepxl said:
your patching the game?

that might be your problem, dont patch it but still use cios 222/223 to load the game

I've tried running the game without it being patched, it didn't work before I patched it, and it didn't work after I patched it.

I'm using cIOS rev14 IOS249, is Brawl not compatible with it?

Even when I use 222/223 to run the game, it still hangs on specified points.

wolffangalchemist · Oct 11, 2009

install the game useing cios 222 or 223 installing brawl or any dual layer game with cios rev 14 breaks the game some how i had a similar issue..

pepxl · Oct 11, 2009

No it isnt it breaks dual layer support so you need to rip and play DL games with 222/223, use cios 222/223 rev3 to load SSBB as rev 4 is a bit iffy on some games that need 222/223 instead of 249

do as most users do and install 222 rev3 and 223 rev 4 then u have the best of both revs

Fellow · Oct 11, 2009

How do I install the game using 222/223, I used CFG USB Loader to install the game, is their some kind of option that lets me install a game using a certain IOS?

wolffangalchemist · Oct 11, 2009

use uloader with cios 222 selected press home button select add new game.
or usbloader gx with cios 222 selected and install the game.

Fellow · Oct 11, 2009

wolffangalchemist said:
use uloader with cios 222 selected press home button select add new game.
or usbloader gx with cios 222 selected and install the game.

Will try, I'll post results soon.

oggzee · Oct 11, 2009

Fellow said:
How do I install the game using 222/223, I used CFG USB Loader to install the game, is their some kind of option that lets me install a game using a certain IOS?

Either put this to your config.txt: ios = 222-mload
Or if you're using the latest narolez forwarder, hold button A to use ios 222 while starting.
In both cases, check in global options if the selected ios is really being used.

boondoklife · Oct 11, 2009

I had that problem too but fixed it when I set it to use 222-mload and block ios reloading.

Fellow · Oct 11, 2009

oggzee said:
Fellow said:

How do I install the game using 222/223, I used CFG USB Loader to install the game, is their some kind of option that lets me install a game using a certain IOS?

Click to expand...

Either put this to your config.txt: ios = 222-mload
Or if you're using the latest narolez forwarder, hold button A to use ios 222 while starting.
In both cases, check in global options if the selected ios is really being used.

I always go to global options and make sure the game is being ran with 222mload.

Before the game is loaded is says:

"mload 222........
starting wii game......."

This indicates that it was selected in the settings, I'll try putting it on the config.txt.

oggzee · Oct 11, 2009

Fellow said:
I always go to global options and make sure the game is being ran with 222mload.

Before the game is loaded is says:

"mload 222........
starting wii game......."

This indicates that it was selected in the settings, I'll try putting it on the config.txt.

Not sure but maybe i need to clarify this some more:
There is a slight difference if you set the ios 222 in game options or in config. If you set it in game options, then the loader will still be using ios 249 while installing and use ios 222 only when starting the game. But if you set it in config, then ios 222 will be used as soon as the loader starts and so used also while installing.
So, checking game options will tell you which ios will be used when starting the game, while checking the ios in global options tells you which ios is being used now, in the loader.
If you already knew all that then just ignore my post.

Fellow · Oct 11, 2009

No, I appreciate the help.

I got the game to work properly just now, I re-installed the game from the game disc using usbloader GX, in the settings I set the standard to 222, the game now works in CFG USB Loader when I choose, mload 222.

The game just needed to be installed using Hermes 222 to work.

pepxl · Oct 11, 2009

WoW how did you come to that conclusion!

pepxl said:
the game should play fine if ripped with 222/223 not 249 rev 14 and make sure your using IOS 222/223 for booting the game

retKHAAAN · Oct 11, 2009

pepxl said:
WoW how did you come to that conclusion!

pepxl said:

the game should play fine if ripped with 222/223 not 249 rev 14 and make sure your using IOS 222/223 for booting the game

Click to expand...

Probably the same way YOU came to that conclusion...someone told you

Hacking SSBB CFG USB Loader

Well-Known Member

GFX W!Z4RD

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

GFX W!Z4RD

Well-Known Member

This is bat country!

GFX W!Z4RD

Well-Known Member

This is bat country!

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

GFX W!Z4RD

Well-Known Member

Similar threads

Popular threads in this forum