It never worked. I followed nh-server's guide, one day i tried to load it out of curiosity and nothing.Was it working before? If so, what was the last thing you did before it stopped working?
It never worked. I followed nh-server's guide, one day i tried to load it out of curiosity and nothing.Was it working before? If so, what was the last thing you did before it stopped working?
Hi I want to do an update from old Atmosphere to the lastest.
Which firmware would I be best install to get most out of this update as I’m running on order firmware also
Big problem: I updated Atmosphere/Hekate through AIO, updated sigpatches (more than once) deleted Tinfoil and all its remnants. Ran the tinfoil installer and it still says "unable to start software" but adds a shortcut to the home menu. Same problem with retroarch, but it does start through the images folder when disabling applet.
Yeah that latest. But I was asking what verson of firmware is best to use at this minute in time ?The latest. 18.1.0
Try updating everything manually and using sys-patch instead of sigpatches. Update Atmos, Hekate, and Fusee first. Then put Tesla Menu, ovlloader, and sys-patch files on your SD card. Then your fw if not already on the latest. Also want to make sure your payloads are up to date.
Yeah that latest. But I was asking what verson of firmware is best to use at this minute in time ?
The latest. 18.1.0
Try updating everything manually and using sys-patch instead of sigpatches. Update Atmos, Hekate, and Fusee first. Then put Tesla Menu, ovlloader, and sys-patch files on your SD card. Then your fw if not already on the latest. Also want to make sure your payloads are up to date.
Everything is working from Atmosphere except homebrew apps (Tinfoil, Retroarch were the only two installed). Homebrew works from the photo menu (when disabling applet mode).
Retail games, all working fine. I haven't updated my OFW (still on 18.0.1), just CFW.
I'm not using fusee, I installed with the NH Switch Guide on github (emunand)
This problem didn't pop up until I used the AIO updater to update Hekate/Atmosphere.
Did you try deleting what AIO updated and updating them manually? I think people run into problems sometimes using AIO. Or try reinstalling Tinfoil and Retroarch? Are you using sigpatches or sys-patch? Maybe post your hekate_ipl.ini contents.
I different guide I read advised me 17.0.1 that there was basic and bugs still on 18.0.1?Everything is working from Atmosphere except homebrew apps (Tinfoil, Retroarch were the only two installed). Homebrew works from the photo menu (when disabling applet mode).
Retail games, all working fine. I haven't updated my OFW (still on 18.0.1), just CFW.
I'm not using fusee, I installed with the NH Switch Guide on github (emunand)
This problem didn't pop up until I used the AIO updater to update Hekate/Atmosphere.
I manually updated Atmosphere, Hekate, Sigpatches. Then deleted Tinfoil and Retroarch through DBI. Everything works in picture menu EXCEPT installing Tinfoil. I havent tried Retroarch yet.
I wanted to update my OFW but Rentry guide says to "Before you upgrade your devices firmware, please ensure to delete your /contents/ folder located in /atmosphere/."
I made a backup, deleted the files, then started atmosphere but now my themes are gone and nothing will load because it thinks everything is corrupt (except folder mode with applet).
ini is
[config]
updater2p=1
[Atmosphere FSS0 emuMMC]
fss0=atmosphere/package3
kip1=atmosphere/kips/*
emummcforce=1
icon=bootloader/res/emu_boot.bmp
[Atmosphere FSS0 sysMMC]
fss0=atmosphere/package3
kip1=atmosphere/kips/*
emummc_force_disable=1
icon=bootloader/res/sys_cfw_boot.bmp
[Stock sysMMC]
fss0=atmosphere/package3
emummc_force_disable=1
stock=1
icon=bootloader/res/stock_boot.bmp
Homebrew works from the menu again, thank you!Try extracting this to root of your sd card, removing the kip1 lines from your ini file, reboot switch. See if things work then. https://gbatemp.net/threads/sigpatc...kate-fss0-fusee-package3.571543/post-10442256
Homebrew works from the menu again, thank you!
Ok, what happened? What went wrong? Was I missing something, and am I safe to update my OFW?
It had to be sigpatch issues on top of the latest cfw update because I installed 6.11.24 from sigma.As long as everything is working, youre good to update ofw. It is recommended though, to update your emuMMC FW first, and then your sysMMC FW.
The problem was with sigpatches. It seems the latest are causing issues for some but not others. The solution was to use sys-patch instead of sigpatches. Glad it worked for you.
Edit: Or, your sigpatches were not up to date. Imo having you use sys-patch was the easier and better option.
Updated to 18.1, themes arent working and neither is tinfoil or anything else. Same problem. I'll revert to previous firmware with daybreak, what a headache.As long as everything is working, youre good to update ofw. It is recommended though, to update your emuMMC FW first, and then your sysMMC FW.
The problem was with sigpatches. It seems the latest are causing issues for some but not others. The solution was to use sys-patch instead of sigpatches. Glad it worked for you.
Edit: Or, your sigpatches were not up to date. Imo having you use sys-patch was the easier and better option.
It had to be sigpatch issues on top of the latest cfw update because I installed 6.11.24 from sigma.
So onto this sys-patch, do I need to update those from a database like sigpatches?
I don't have emuMMC. It does not load anything and forces a hard reset. It says "Atmosphere FSS0 emuMMC" in hekate boot options but, goes nowhere. Only SysCFW (Atmosphere) and Stock sysMMC work.
Is there a way to fix that?
And assuming this all gets fixed, can you point me in the right direction for updating emuMMC and then sysMMC in that order? As I understand, just have to load daybreak then the ofw?
Post automatically merged:
Updated to 18.1, themes arent working and neither is tinfoil or anything else. Same problem. I'll revert to previous firmware with daybreak, what a headache.
The latest. 18.1.0
Try updating everything manually and using sys-patch instead of sigpatches. Update Atmos, Hekate, and Fusee first. Then put Tesla Menu, ovlloader, and sys-patch files on your SD card. Then your fw if not already on the latest. Also want to make sure your payloads are up to date.
Manually updating is basically copying files to the SD card. You would download the latest versions of everything on your computer (usually zip files) then unzip to the root of your SD card. Do it in the same order that @RedColoredStars suggested. The final step would be to update the HOS firmware itself, to 18.1.0. You will do that with the Daybreak homebrew, already installed with Atmosphere.May I please ask how to actually update things? Assume I haven't updated my switch since the initial mod. I assume there's a guide somewhere that ELI5 step by step?
that fixed it, tysm i have been trying to fix this for so long and it finally works. I will restore my save data backup from JKSV now.