Installation was fine, soldering was good
Maybe its because your wiring to the BIOS is causing issues. I'd suggest getting the KunaiGC QSB for that matter.Installation was fine, soldering was good
I've removed the mod, tested it in another gc, works, returned it into this one, nope.
For some reason,my og gc that I got on launch doesn't want to be modded
Guess imma wait for flippydrive
What color is the "Please insert disk" text when you go into the BIOS disc screen?Installation was fine, soldering was good
I've removed the mod, tested it in another gc, works, returned it into this one, nope.
For some reason,my og gc that I got on launch doesn't want to be modded
Guess imma wait for flippydrive
https://stoneagegamer.com/kunaigc.html
Are the wires shortened as much as possible? IPL chips are picky with wire length. My picoboot install had the same issue as yours at first until I shortened the wires. People recommend 26-28 awg.Installation was fine, soldering was good
I've removed the mod, tested it in another gc, works, returned it into this one, nope.
For some reason,my og gc that I got on launch doesn't want to be modded
Guess imma wait for flippydrive
True, you're not wrong. The first time I ever did a PicoBoot mod was that I used 28AWG stranded wire for all of the points, turned it on and before you know it, the Pico fried. But not to worry, those things are cheap as chips.
That sounds more like it was wired wrong or there was a short, too long wires can affect the data signal and reduce available power, but it shouldn't be possible to fry the chip.
I've used the Cubeboot firmware, which allowed me to add a custom logo text and color. Apparently, somebody said that the diagram is the same as PicoBoot.
I load Cubeboot from the sd2sp2, since I didn't realize you could install it directly to the Pico (maybe this wasn't possible at the time)
That's the point, there was no video output
Kunai doesn't use wires
Xdqwerty
Psionic Roshambo
@
needystreameroverdose:
@
Psionic Roshambo:
@
Xdqwerty:
