Could we please also have a firmware version for Seeedunio XIAO RP2040 as well?
It is a little bit smaller than RP2040-zero(21x17.5 mm vs 23.5x18 mm).
Also all SMD components are on the front side of XIAO, making its back side pretty flat.
The firmware for ZERO can't be used for XIAO because:
1. the RGB LED is wired to GP16 on ZERO but GP12 on XIAO.
2. GP15 (CPU) is not wired on XIAO.
It is a little bit smaller than RP2040-zero(21x17.5 mm vs 23.5x18 mm).
Also all SMD components are on the front side of XIAO, making its back side pretty flat.
The firmware for ZERO can't be used for XIAO because:
1. the RGB LED is wired to GP16 on ZERO but GP12 on XIAO.
2. GP15 (CPU) is not wired on XIAO.
It has nothing to do with pikofly.
Now we still need to wait.
What you are talking about is for unpatched v1.
It has nothing to do with it at all.
what is the expected date to launch fw 2.6?
When its good and ready. The guy is working on it in his free time. Asking won't make it happen any faster
In case anyone is wondering V2 flex cable working fine in an oled. As it should since it lines up the same and uses same mosfets.
They are the same fets in the same capacitor positions, just uses different routing for the connector for different chip placement. But all mariko apu is the same with same caps so one could bulk order one type and use it for all.
- Joined
- Sep 2, 2020
- Messages
- 1,270
- Trophies
- 0
- Age
- 39
- Location
- TORONTO
- Website
- form.jotform.com
- XP
- 2,202
- Country
cause v2, lite, oled these 3 all use same Mariko
Echo
Post automatically merged:
Echo
For the noobs, oled, v2, lite flex ribbons should all work
Ok, added into plans for v2.6, but it will be a single fw compatible with both of them
Thank you for answering me. But should I install Atmo and Hekate together or are they different?. Current console firmware is 16.01 ( recently updated)
I managed to install it with a magnifying glass and used the microscope of my phone for checking the soldering (it needs to be really close, so I can't use it while I solder).
You need both of them, plus some additional files. There are alot of guides on how to do that (a couple of them in this thread aswell).
Just google "switch homebrew" and you will have all ypur answers because this precedure is the same whichever modchip you use.
Post automatically merged:
I Installed my first one with my camera phone and it was pain in the a**
If you plan on ever doing any smd solderin in the future get a microscope (it does not have to be high end)
Similar threads
-
-
-
-
-
-
-
@
Psionic Roshambo:
32GBs is the baseline for 4K video editing these days and lots of recommendations for 64GBs but for games 16,GBs is honestly plenty for a long time. -
-
-
-
-
-
-
-
-
-
@
Psionic Roshambo:
Some sort of police thing going on near me lol "Get out of the car with your hands up and walk backwards towards us" over a loud speaker thing
-
-
-
-
-
-
-
-
