I don't have the skills and knowledge to fix it myself. And those in my city who know how to repair, want such money that it's easier to buy a new switch)
It's not a clone, but rather an... upgrade?Tempers, is this an Aliexpress error?:
View attachment 361623
a nstinct for oled (Hwfly clone) on only 39 USD?
hwfly also got issues with them, but not as much. They had longer time to develop their firmware after all.Is it really that Picofly has some problems with some Toshiba/ Samsung emmc,while it has not any problem the hwfly?
hey, I work on this in my free time, and this $3 shit (with mismatching 3.3v/1.8v voltage levels!!) already outperforms hardware fast FPGAs thx to algorithms.Is it really that Picofly has some problems with some Toshiba/ Samsung emmc,while it has not any problem the hwfly?
Legend! Thank you!hey, I work on this in my free time, and this $3 shit (with mismatching 3.3v/1.8v voltage levels!!) already outperforms hardware fast FPGAs thx to algorithms.
hwfly doesn't work with SanDisk at all, and with this fix, Toshiba should be fine
gimme some time, the todo list for 2.6 is
- fix HOS auto-off code
- software update support
- remove encryption
- faster PIO sniff
- rework OFW-related things
use .uf2 over USBBoots hekate but can't boot Atmos SYS CFW and Atmos EMMC, ran the unlock.bin file but still this error. Boots OFW fine
oh crap already removed the usb portuse .uf2 over USB
.bin was purposed for the unlock through the hekate payload tool, but it breaks OFW due to the bug =/
well, it should work through the toolbox (place unlock.bin on SD card, press 'HOS Unlock'), but this can break 'reboot to OFW', (can be repaired by restoring the proper BOOT0, so I recommend to perform backup before doing that)oh crap already removed the usb port
Lol I removed the port on mine too before verifying that it worked. Now I soldered a usb cord to the pin remainsoh crap already removed the usb port
well, it should work through the toolbox (place unlock.bin on SD card, press 'HOS Unlock'), but this can break 'reboot to OFW', (can be repaired by restoring the proper BOOT0, so I recommend to perform backup before doing that)
Lol I removed the port on mine too before verifying that it worked. Now I soldered a usb cord to the pin remains
Mine is the rp2040-one with the big usb a connector. Not sure how yours would wire up if its the usb c versionHave you got a pic of the install? Which wires are necessary
Sent from my iPhone using Tapatalk
ecommending the cable, rather than the mosfet for a reason /shrug
The resistance between the two sides of the Cap should be around 15-40Ohms. It can be a little lower or higher. Zero means the SOC has internal damage.I couldn't find damage on my own. But it looks like it's completely broken. Capacitors on CPU have zero resistance. Someone told me it means that processor is dead.
it's a problem with hwfly too.Is it really that Picofly has some problems with some Toshiba/ Samsung emmc,while it has not any problem the hwfly?
Nintendo switch Lite green but nothing on screen
Nintendo switch Lite green but nothing on screen
Post automatically merged:
Can i get some help pls