PS TV always asks to connect the controller to press the PS button after being turned on

[godreborn]

probably the hdd in the system. the ps3 can't make use of ssd without a trim feature, not sure if the ps4 even can.

 

[Windows_10_User]

probably the hdd in the system. the ps3 can't make use of ssd without a trim feature, not sure if the ps4 even can.

And what did I confuse, exactly?

 

[godreborn]

I thought you confused bits and bytes. bytes is what you normally see, so 1Gb is a little over 100MBs at optimal speed. I think the series x or ps5 might be able to achieve this, but definitely not the ps3.

 

[Anderxale]

8 bits = 1 byte

8,000kbps = 8mbps = 1MB/s

If you think that's confusing.... 1 bit = 4 nibbles
Not kidding
So one byte = 32 nibbles

 

[Windows_10_User]

I'd start by disabling all plugins that aren't absolutely essential and seeing if that works.

On the ur0:/tai/config.txt

Try putting a # in front of every plugin except the required plugins. The required are:

ur0:tai/yamt.suprx
ur0:tai/yamt_helper.skprx
ur0:tai/henkaku.suprx (there are multiple of this)

If the PSTV works fine, If start removing the # in front of the plugins a few at a time and restarting until the issue arises.

If you disable then all with the # and it still doesn't work, you probably need to format the PSTV. Sorry.

I did this and I still have the same issue.

 

[godreborn]

I did this and I still have the same issue.

Remove the microsd card or usb and try a system restore. It will format the system.

 

[Anderxale]

Remove the microsd card or usb and try a system restore. It will format the system.

I agree... unfortunately.

I just hope that your issue is resolved with a system wipe and that's it's not a hardware issue.

Do you have a Sony power adapter? Or from another company? It must be 5v 1.3A or higher if it's non Sony.

 

[Windows_10_User]

I agree... unfortunately.

I just hope that your issue is resolved with a system wipe and that's it's not a hardware issue.

Do you have a Sony power adapter? Or from another company? It must be 5v 1.3A or higher if it's non Sony.

For charging the controller?

 

[Anderxale]

For charging the controller?

The PSTV, what power adapter?

 

[Windows_10_User]

The PSTV, what power adapter?

I think it's the original. If I didn't have it, how could it be turn on?

 

[Anderxale]

I think it's the original. If I didn't have it how could I turn it on?

Well it's a common 5v barrel jack size.

By underpowering electronics got can get undesired results. It's the only reason I'm asking.

Probably the regular PSTV power adapter or a replacement meant for the PSTV... so it's probably ok. I just thought it also might be the reason.

 

[Windows_10_User]

I restored the system and inserted the USB flash drive and not only the problem continues but also the homebrew remains on LiveArea and when I click it I have an error message. What should be done now?

 

[Anderxale]

I restored the system but not only the problem continues but also h-encore, VitaDeploy, VitaShell and the remaining apps still show up on LiveArea and when I click them I have an error. What should I do now?

How did you do it?

Did you go to Settings > Format > Restore this system?

Or did you do it from recovery?

 

[Windows_10_User]

How did you do it?

Did you go to Settings > Format > Restore this system?

Or did you do it from recovery?

I went to "Settings", "Format" and "Restore This System". Why am I asked to disable my PSN account? I tried to but I had an error message.

 

[Anderxale]

I went to Settings, Format and Restore this system. Why am I asked to disable my PSN account? I tried to but I had an error.

Try from safe mode (recovery).

Choose Restore This System.
Then update.

 

[Windows_10_User]

Try from safe mode (recovery).

Choose Restore This System.
Then update.

It continues, even without the USB flash drive inserted, so it seems it's not related to it.

 

[Anderxale]

It continues, even without the USB drive so it looks like it isn't related to it.

You did a system restore from recovery and you updated too already?

 

[Windows_10_User]

You updated too already?

It said I already had the latest version installed, which I find it odd. What's the difference between formatting it on Settings and on Recovery Menu?

 

[Anderxale]

It said I already had the latest version installed, which is weird. What's the difference between formatting it on Settings and on the Recovery Menu?

If you still have Henkaku, turn off Enable Version Spoofing, then try?

 

[Anderxale]

It said I already had the latest version installed, which is weird. What's the difference between formatting it on Settings and on the Recovery Menu?

PSN, I think.

Not positive. I just always learned you have to do it from Safe Mode and then update.