Go into hekate and disable AutoRCMMy switch can only boot via hekate then sysnand cfw, but when I do the normal boot, no boot logo and no display...please help
I didn't activate the AutoRCM, it was always disabledGo into hekate and disable AutoRCM
Where I could find the Autoboot?Do you have "Autoboot" enabled in Hekate?
Nope I'm not using any game card, all my games are installed at my sd card. What I do is using power off option from hekate. then after that normal power on, but no boot logo appears...AutoRCM is disabledIf you have a game card inserted, try removing that. And to boot vanilla sysnand, don't use a boot option from the .ini, use the reboot option in nyx, and choose OFW from there (and what @Shadow#1 said, if that doesn't do it for you)
Noted, I'll check on this oneThe best way afaik....go into (Your SD Card)/bootloader and open Hekate_ipl.ini in editor....find Autoboot under [config].....if there's a "0" then Autoboot is not enabled...if ther's a "1" then turn it into "0".
https://github.com/CTCaer/hekate/blob/master/res/hekate_ipl_template.ini
try removing the sd card and powering on normally as stockMy switch can only boot via hekate then sysnand cfw, but when I do the normal boot, no boot logo and no display...please help
they are both the same 3.2.0, no games installed or themes, my card is on exfatAre your sysnand and emunand on different firmware versions? Do you have a theme installed on sysnand? Check the Nintendo titles folder for 0100000000001000 and 0100000000000811. Delete them if they exist. Hell, try booting without an SD card in at all, to see if it boots. If it does boot without a card... is your card formatted to exfat? Do you have a recent backup of the card that you can copy over?
already did that, but still no boot logotry removing the sd card and powering on normally as stock
Yes I already check it, Autoboot if off, RCM is offDid you check
{-------- Stock -------}
[Stock]
fss0=atmosphere/package3
stock=1
emummc_force_disable=1
# This disables kernel patching and CFW kips.
# Includes exosphere and warmboot, ONLY when >= 7.0.0 and Erista.
# Includes exosphere on Mariko.
# Exosphere/warmboot are not identifiable as it is now.
# This is the closest to OFW, especially when AutoRCM is needed.
doesn't matter. OP already tried booting without an SD card inserted. The problem now points to a corrupt Boot 0. Maybe. Watch this video:Did you check
Wait a minute. You are not providing the whole story here. If you can boot cfw SYSNAND, but not ofw sysnand, Your problem is that you have more fuses burned than SHOULD be burned for fw 3.2.0. That is the only answer. I want you to boot into nyx, tap "Console Info", then tap "HW & Fuses". Take a picture of that screen and post it here.My switch can only boot via hekate then sysnand cfw, but when I do the normal boot, no boot logo and no display...please help
Thanks for the responses, anyway I already fixed it, I restore it using a donor boot0 and boot1 and prod keysWait a minute. You are not providing the whole story here. If you can boot cfw SYSNAND, but not ofw sysnand, Your problem is that you have more fuses burned than SHOULD be burned for fw 3.2.0. That is the only answer. I want you to boot into nyx, tap "Console Info", then tap "HW & Fuses". Take a picture of that screen and post it here.