Hacking SWITCH NOOB PARADISE - Ask questions here

[FloridaMan79]

Thanks ! Nice to know updating root folders update both sysnand and EMUMMC. Before I start from scratch even though I still have the EMUMMC file type folder in the SD card there is no way to restore the EMUMMC with that folder still intact?
edit:

I made a 2nd EMUMMC but but it's not showing on Launch options . Heres what's on hekate_ipl.ini on my bootloader folder and emmummc.ini. Anyone want to take a stab on the missing code to add the path to emummc?

Hekate.ini
[config]
updater2p=1
{------ Atmosphere ------}
[Atmosphere FSS0 SYS]
fss0=atmosphere/package3
kip1=atmosphere/kips/*
emummc_force_disable=1
icon=bootloader/res/sys_cfw_boot.bmp
{}
{-------- Stock ---------}
[Stock SYS]
fss0=atmosphere/package3
stock=1
emummc_force_disable=1
icon=bootloader/res/stock_boot.bmp

xxxxxx

[emummc]
enabled=1
sector=0x0
path=emuMMC/SD00
id=0x0000
nintendo_path=emuMMC/SD00/Nintendo

Wow was able to recover my emummc found the missing code from the updated hekate_ipl.ini found in this NH Switch Guide.

{------ Atmosphere ------}
[Atmosphere FSS0 EmuMMC]
fss0=atmosphere/package3
kip1=atmosphere/kips/*
emummcforce=1
icon=bootloader/res/emu_boot.bmp
{}

 

[Gifted1]

Hello. I have a question. I recently ran across a video where they were talking about editing saves for the switch but the console had to be jailbroken. Now I have a SaveWizard for the PS4 that allows you to edit a save file and your PS4 doesnt have to be jailbroken. Is there a program like SaveWizard but for Switch? My Switch can't be jailbroken so I'm wondering if theres a way I can edit save files without jailbreaking. Thanks in advance.

 

[_9786_]

I lost my sd card so can I just set up a new one from scratch and it will work? If not, what can I do?

 

[Hayato213]

Hello. I have a question. I recently ran across a video where they were talking about editing saves for the switch but the console had to be jailbroken. Now I have a SaveWizard for the PS4 that allows you to edit a save file and your PS4 doesnt have to be jailbroken. Is there a program like SaveWizard but for Switch? My Switch can't be jailbroken so I'm wondering if theres a way I can edit save files without jailbreaking. Thanks in advance.

Not for the switch at the moment, you need CFW in order to decrypt your save.

--------------------- MERGED ---------------------------

I lost my sd card so can I just set up a new one from scratch and it will work? If not, what can I do?

Yes you could as long you use the necessary files require to get up and running. You can follow the link below to set up vanilla atmosphere.

https://gbatemp.net/threads/how-to-hekate-chainload-vanilla-atmos.563255/

https://github.com/Atmosphere-NX/Atmosphere/releases/tag/1.0.0
https://github.com/CTCaer/hekate/releases/tag/v5.6.0
https://github.com/ITotalJustice/patches/releases/tag/12.1.0-1.0.0

For hekate_ipl.ini, for any lines that use fusee-secondary.bin, you must change that from fss0=atmosphere/fusee-secondary.bin in hekate_ipl.ini must be changed to fss0=atmosphere/package3.

 

[Gifted1]

Not for the switch at the moment, you need CFW in order to decrypt your save.

Ok. thanks.

 

[Draxzelex]

Wouldn't that be, presumably, the single bin in the warmboot_mariko dir? That got dumped, as far as I can tell.

Is that in the /atmosphere folder?

Maybe I wasn't clear enough. Firstly, I started atmo without migrating emummc (I didn't do that in the menu, just launched atmo) and I'm wondering if it started on the sysnand and if the sysnand is "dirty" or flagged by N now or it started on the emunand somehow (I had emunand created for sxos) - I want to have clean sysnad. That error/information (which isn't mentioned in the guide) occurred when I switched off device with atmo and went into menu once again, to migrate emummc (which should I do before starting atmo).

Well if you booted Atmosphere before migrating emuMMC, then it couldn't have possibly booted emuMMC because it wasn't migrated yet; Atmosphere doesn't magically boot on its own or anything.

 

[NintenDoe]

Hey recently purchased a hackable switched and was wondering what guides I should follow for my criteria.

• Want to transfer my saves and purchased games from current switch [1] to (to be hacked) switch [2]
• Wanting to sell switch [1] and make switch [2] my primary switch.
• Able to play online purchased games on hacked switch [2] whilst being able to play offline downloaded games.

Thanks for any responses. New to switch modding and was just overwhelmed with the amount of resources available and not sure which one to follow, since most people say to have a separate modded and clean switch.

 

[such]

Is that in the /atmosphere folder?

No, it got created in root, and stayed there. That's interesting, though. If it should be somewhere else I'll try moving it and see what happens.

 

[Goku1992A]

How stable is the current CFW on 12.0.2 I think ? Do all the emulators work on it?

 

[Arakon]

12.1.0 is the latest firmware, and it's as stable as it gets.

 

[pepoy]

Hi i havent updated my firmware since before pandemic. havent been able to touch my switch since then however now i see sxos is closed. i will restore my official firmware. is there anything i should be cautious before updating to official firmware? planning to get atmosphere also.

 

[Hayato213]

Hi i havent updated my firmware since before pandemic. havent been able to touch my switch since then however now i see sxos is closed. i will restore my official firmware. is there anything i should be cautious before updating to official firmware? planning to get atmosphere also.

Depends on your goal, if you update sysnand firmware above 11.0.0, you can no longer boot up SX OS, so if you want to continue use SX OS while able to use Atmosphere you need to make an emunand. No need to restore original firmware unless you have a clean firmware that you plan to use to go online..

 

[Wookis]

Just hacked my switch yesterday, worked fine, but now it says “a fatal error has occurred. Press power to reboot the system.
Invalid GPT Signature
Did this ~5 times yesterday, worked fine. Can still boot into Hekate and stock.
Help?
EDIT: if it helps, one partition is 170gb FAT32 and other (for emunand) is 70gb unformatted. using emummc, sysmmc works perfect.

 

[Milad]

Do you have a partition basaed EmuMMC? If yes it is probably that partition it complains about. Check if you can see another partition with data

Thanks dude

 

[Goku1992A]

12.1.0 is the latest firmware, and it's as stable as it gets.

Does it work well with MyGba, Retroarch, PSNES, and PFBA

 

[Hayato213]

Does it work well with MyGba, Retroarch, PSNES, and PFBA

Think he misread your question in the first place, he probably talking stability of 12.1.0 CFW in general not on the topic of emulator.

 

[Goku1992A]

Think he misread your question in the first place, he probably talking stability of 12.1.0 CFW in general not on the topic of emulator.

Yeah Idk because I updated not to long ago to 11.0.1 firmware and everything works good. I do want to upgrade but I don't wanna mess up my setup because the last time I upgraded I had to delete all my stuff and it was a hassle.

Dont forget about the sig patches you gotta do that right also because it seems to change after each update

 

[such]

No, it got created in root, and stayed there. That's interesting, though. If it should be somewhere else I'll try moving it and see what happens.

Well, that didn't do me any good. Same errors. Could anyone share their correct path?

 

[CursaT]

I have a hopefully easy question:

I have 4 hacked switches (one for each family member, In case that's relevant). We have always played nsp files of the games, and I created emunands that didn't have Nintendo accounts linked to them to prevent bans as I never cared about going online.
Now I want to try my luck online with ACNH, but can't link my account to my emunand. I get errors every time.

So I physically bought a cartridge of ACNH to reduce the ban risk, but my question is how to go online with my emunand (and being able to edit my saves)?

Do I need to Create a new emunand on a spare SD card from my stock OS that (now) has a linked Nintendo account and only keep the bare min homebrew apps like JKSE, use the physical cartridge, And have no other nsp games?

Or can I:

A.) somehow link it to my current SD and cfw emunand that has tons of nsp and homebrew apps?
Or
B.) Link it to my cfw sysnand that I've never messed with since modding my switch? (I don't really understand the cfw sysnand purpose)


Thanks in advance!

 

[Hayato213]

I have a hopefully easy question:

I have 4 hacked switches (one for each family member, In case that's relevant). We have always played nsp files of the games, and I created emunands that didn't have Nintendo accounts linked to them to prevent bans as I never cared about going online.
Now I want to try my luck online with ACNH, but can't link my account to my emunand. I get errors every time.

So I physically bought a cartridge of ACNH to reduce the ban risk, but my question is how to go online with my emunand (and being able to edit my saves)?

Do I need to Create a new emunand on a spare SD card from my stock OS that (now) has a linked Nintendo account and only keep the bare min homebrew apps like JKSE, use the physical cartridge, And have no other nsp games?

Or can I:

A.) somehow link it to my current SD and cfw emunand that has tons of nsp and homebrew apps?
Or
B.) Link it to my cfw sysnand that I've never messed with since modding my switch? (I don't really understand the cfw sysnand purpose)


Thanks in advance!

You can't go online with a non clean NAND you just going to get ban, you would need a clean NAND to play online.