Toggle sidebar

Hacking SWITCH NOOB PARADISE - Ask questions here

  • Thread starter Thread starter APartOfMe
  • Start date Start date
  • Views Views 6,149,087
  • Replies Replies 47,992
  • Likes Likes 66
Hello

This is my first time on a forum so I'm sorry if this is in the wrong area but I have a switch with display but no back-light I have checked the back-light connector and I am getting a voltage of 0.12 3.85 0.12 0 and I have checked the back-light chip (TPS61163A) and the resistors are not shorting out so I'm wondering would it be a bad lcd or is their something else I should check.

Thanks in advance
 
Draxzelex said:
Don't use TegraRCMGUI. Just use TegraRCMSmash instead.

First, there is no such thing as "1st" or "2nd" generation Switch. There are Erista and Mariko units. Secondly, if by "2nd generation" you mean Mariko, then the only way to hack those is with the TX modchip. While the modchip will work regardless of firmware, SX OS does not support firmware 11.0.1. However Atmosphere does and the next official release will allow users with the modchip to boot into it.
Click to expand...

I copied the command from TegraRCMSmash and nothing happens in cmd/powershell still. Just says it's trying on USB device, and then nothing after that line. I'll try again, but I imagine I can't as it's too new, but it's annoying I can't get a message telling me I definitely can or can't. I probably have a Mariko unit in that case, how can I check? And which Atmosphere release will support TX modchip? 0.17.0?
 
LukeIMG19 said:
I copied the command from TegraRCMSmash and nothing happens in cmd/powershell still. Just says it's trying on USB device, and then nothing after that line. I'll try again, but I imagine I can't as it's too new, but it's annoying I can't get a message telling me I definitely can or can't. I probably have a Mariko unit in that case, how can I check? And which Atmosphere release will support TX modchip? 0.17.0?
Click to expand...
Mariko units are sold in the red boxes so if you bought it new like that, then there's your answer. The other way to check is with the serial number which you can find here. And yes, the 0.17 release of Atmosphere will allow booting on the TX modchip.
 
  • Like
Reactions: LukeIMG19
Hey everyone I have been out of the scene for a while but I wanted to get everything updated so I can play Hades on OFW while retaining my Emunand.

What are your recommendations to update my current setup:

OFW-10.0.4
Emunand-9.0.1
SXOS-2.9.3.

I read that atmosphere already has support for 11.0.1 on Emunand but I would rather not have to redo my whole setup if I don't have to and can stick with SXOS. Thanks guys.
 
Rizzo0 said:
Hey everyone I have been out of the scene for a while but I wanted to get everything updated so I can play Hades on OFW while retaining my Emunand.

What are your recommendations to update my current setup:

OFW-10.0.4
Emunand-9.0.1
SXOS-2.9.3.

I read that atmosphere already has support for 11.0.1 on Emunand but I would rather not have to redo my whole setup if I don't have to and can stick with SXOS. Thanks guys.
Click to expand...
If you're not using XCI files, then switching to Atmosphere is no big deal. TX's future is uncertain, and switching to Atmosphere might be recommended.

If you're using your sysMMC for online play, it needs to be updated to the latest version through the system settings.

Your emuMMC can be updated using Daybreak on Atmosphere (recommended method of updating). You should update to 11.0.0 of you plan on using SX OS, and you should update to 11.0.1 if you plan on ditching SX OS. Alternatively, you can use ChoiDujourNX on SX OS to update (not recommended).

Your CFW, whatever it is, should be updated to the latest version.
 
Draxzelex said:
Mariko units are sold in the red boxes so if you bought it new like that, then there's your answer. The other way to check is with the serial number which you can find here. And yes, the 0.17 release of Atmosphere will allow booting on the TX modchip.
Click to expand...

Yep, I'm XKJ which is 100% patched (and box is definitely red). Looks like a SX Core is (near) impossible to get hold of, so I'm out of luck for now. Thanks anyway!
 
so if this isnt allowed to ask then sorry....but is there a way to extract a dev build of a game and repack it for retail (like they did with the PKMN Sword Betas)? i have the Lets Go beta as NSP but its only usable on a Dev unit....is there any program to do it?
 
I am having some interesting behavior with Atmosphere 0.16.2. If I hold the power button and select turn off inside Atmosphere on my emunand, the screen goes black and it appears to turn off. However, if I press the power button to boot my ofw sysnand, my Switch will freeze on the "Nintendo Switch" logo. If I press the button again, it will boot into my sysnand correctly. If I reboot atmosphere to Hekkate and power off from there, I don't encounter this problem. My first thought was atmosphere was rebooting to RCM, but this doesn't appear to be the case. What's happening here? Thanks!
 
Last edited by Neville_Shorttop,
I havent touched my Switch in a couple years and I'm trying to get everything updated so I can play newer nsps. I dont remember much, but the system settings say Reinx 6.0, the Switch is in AutoRCM so I have to inject payload to boot whenever it dies, and I do have a backup of BOOT0, BOOT1, rawnand, and device.keys. Is it just a matter of clearing the SD card and adding the new files of Atmosphere etc from sdsetup? Do I need to update the system firmware or can I leave it on the older version?
 
Nugzy said:
I havent touched my Switch in a couple years and I'm trying to get everything updated so I can play newer nsps. I dont remember much, but the system settings say Reinx 6.0, the Switch is in AutoRCM so I have to inject payload to boot whenever it dies, and I do have a backup of BOOT0, BOOT1, rawnand, and device.keys. Is it just a matter of clearing the SD card and adding the new files of Atmosphere etc from sdsetup? Do I need to update the system firmware or can I leave it on the older version?
Click to expand...
Switch to the latest version of Atmosphere with the appropriate signature patches, and update to 11.0.1 using Daybreak.
 
Neville_Shorttop said:
I am having some interesting behavior with Atmosphere 0.16.2. If I hold the power button and select turn off inside Atmosphere on my emunand, the screen goes black and it appears to turn off. However, if I press the power button to boot my ofw sysnand, my Switch will freeze on the "Nintendo Switch" logo. If I press the button again, it will boot into my sysnand correctly. If I reboot atmosphere to Hekkate and power off from there, I don't encounter this problem. My first thought was atmosphere was rebooting to RCM, but this doesn't appear to be the case. What's happening here? Thanks!
Click to expand...
Are you using the latest version of both Hekate and Atmosphere?
 
Kanakops said:
Hi, what should I use for updating my emunand ? Daybreak or choixdujour?
The update can impact the sysnand / bricking it ? Because in this thread
https://gbatemp.net/threads/switch-...-while-updating-firmware-via-daybreak.572588/
I think he updated his emunand but still got a brick ?
Click to expand...
For starters, ChoiDujour only supports up to firmware 6.2 so that is already out of the question. Secondly, 99% of users mistake a black screen for a brick or something else stupid so majority of "bricks" are not actually bricks.
 
  • Like
Reactions: Kanakops
Hi
Can anyone help?

So in CFW mode my son dropped the switch and later the system told me to reinsert the sdcard, the switch got restarted

Later I tried to cfw'ed it again, but whenever I push the Reinx.bin payload via Hekate, it will not bootup to reinxsplash screen (the animegirl with sunglasses)
It only booted up to black splash screen and nothing

I'm using Hekate ctcaer 5.2.1.bin
in official firmware, the sd card is detected

Everything works well before

Any idea?
 

Site & Scene News

Go to forum More news

Popular threads in this forum

Dekopon - (Mostly) Fullspeed 3DS Emulation on Nintendo Switch

Emulation Emulator  Cemu - Wii U Emulator - Switch Port

Emulation Emulator  Dolphin - GC/Wii Emulator - Switch Port

Emulation Emulator  DrasticDS Emulator - Switch Port

Raikopon - a speedy, experimental 3DS emulator for Nintendo Switch (Dekopon Fork)

Emulation Gaming Homebrew Others Homebrew app Emulator  [Nintendo Switch] Raika Azahar - The 3DS Emulator aimed at base Nintendo Switch

Homebrew Homebrew game  Plants vs Zombies Fusion - Switch Port

Homebrew Homebrew game  Animal Crossing: Pocket Camp Complete - Switch Port