Hacking Can't open any of my games after updating.

[Ihy]

I recently updated my Nintendo switch offline, everything is working but my games are no longer loading. What do I do?

 

[Zozueh]

pls more info, what´s your cfw? ofw version? whar error shows when you try to load the game?

 

[Ihy]

pls more info, what´s your cfw? ofw version? whar error shows when you try to load the game?

Cfw is 0.14.1 and the ofw is 10.1.0.
The error message is 'unable to start software. Return to HOME Menu and try again'

 

[Souperman9]

Cfw is 0.14.1 and the ofw is 10.1.0.
The error message is 'unable to start software. Return to HOME Menu and try again'

Upgrade your sigpatches

 

[Ihy]

Am a serious novice, could you give me a step by step guide on how to upgrade my patches? I would really appreciate it. Thanks

 

[Lacius]

Am a serious novice, could you give me a step by step guide on how to upgrade my patches? I would really appreciate it. Thanks

1. Make sure the SD card is FAT32.
2. Remove all CFW files/folders from your SD card (that would be folders like /sept/ and /atmosphere/)
3. Download the latest Atmosphere
4. Download the latest fusee-primary (next to Atmosphere)
5. Download these signature patches (for Atmosphere v0.14.1)
6. Put Atmosphere and the signature patches onto your SD card
7. Put the SD into your Switch
8. Enter RCM
9. Launch Atmosphere using fusee-primary

The above steps will be slightly different if you're using an emuMMC.

 

[Ihy]

1. Make sure the SD card is FAT32.
2. Remove all CFW files/folders from your SD card (that would be folders like /sept/ and /atmosphere/)
3. Download the latest
4. Download the latest fusee-primary (next to Atmosphere)
5. Download(for Atmosphere v0.14.1)
6. Put Atmosphere and the signature patches onto your SD card
7. Put the SD into your Switch
8. Enter RCM
9. Launch Atmosphere using fusee-primary

The above steps will be slightly different if you're using an emuMMC.

But I just downloaded Atmosphere 0.14.1, should I remove it and reload again, cause I still have it on my laptop or should I just download the signature patches? Secondly, where do I put the signature patches file? Is it in a particular folder in the SD card or just on the root of the SD card?

--------------------- MERGED ---------------------------

1. Make sure the SD card is FAT32.
2. Remove all CFW files/folders from your SD card (that would be folders like /sept/ and /atmosphere/)
3. Download the latest Atmosphere
4. Download the latest fusee-primary (next to Atmosphere)
5. Download these signature patches (for Atmosphere v0.14.1)
6. Put Atmosphere and the signature patches onto your SD card
7. Put the SD into your Switch
8. Enter RCM
9. Launch Atmosphere using fusee-primary

The above steps will be slightly different if you're using an emuMMC.

Furthermore, am actually using EMUMMC, Thats what I used to launch the switch after bringing it on with my payloader.

 

[Lacius]

But I just downloaded Atmosphere 0.14.1, should I remove it and reload again, cause I still have it on my laptop or should I just download the signature patches? Secondly, where do I put the signature patches file? Is it in a particular folder in the SD card or just on the root of the SD card?

I recommend following my instructions. Delete the CFW folders on your SD card and redownload Atmosphere 0.14.1.

Furthermore, am actually using EMUMMC, Thats what I used to launch the switch after bringing it on with my payloader.

Unless you are using online play with a clean sysMMC (or you have an ipatched Switch on 4.1), using an emuMMC is not recommended. If you are going to use an emuMMC anyway, follow these steps instead:

1. Make sure the SD card is FAT32.
2. Remove all CFW files/folders from your SD card (that would be folders like /sept/ and /atmosphere/)
3. Download the latest Atmosphere
4. Download the latest fusee-primary (next to Atmosphere)
5. Download these signature patches (for Atmosphere v0.14.1)
6. Put Atmosphere and the signature patches onto your SD card
7. Set "emummc!enabled = 1" in emummc/emummc.ini
8. (If not on 10.1.0) Download the 10.1.0 update and put the 10.1.0 folder onto the root of your SD card
9. Put the SD into your Switch
10. Enter RCM
11. Launch Atmosphere using fusee-primary
12. Check that you've booted into your emuMMC (in the system settings)
13. (If not on 10.1.0) If you're in your emuMMC, open the Homebrew Launcher, preferably using title override (R on a game instead of using the photo album)
14. (If not on 10.1.0) Boot Daybreak
15. (If not on 10.1.0) Select the 10.1.0 update. Choose the 10.1.0 exFAT option, even though you're using FAT32.

 

[Ihy]

I recommend following my instructions. Delete the CFW folders on your SD card and redownload Atmosphere 0.14.1.


Unless you are using online play with a clean sysMMC (or you have an ipatched Switch on 4.1), using an emuMMC is not recommended. If you are going to use an emuMMC anyway, follow these steps instead:

1. Make sure the SD card is FAT32.
2. Remove all CFW files/folders from your SD card (that would be folders like /sept/ and /atmosphere/)
3. Download the latest Atmosphere
4. Download the latest fusee-primary (next to Atmosphere)
5. Download these signature patches (for Atmosphere v0.14.1)
6. Put Atmosphere and the signature patches onto your SD card
7. Set "emummc!enabled = 1" in emummc/emummc.ini
8. (If not on 10.1.0) Download the 10.1.0 update and put the 10.1.0 folder onto the root of your SD card
9. Put the SD into your Switch
10. Enter RCM
11. Launch Atmosphere using fusee-primary
12. Check that you've booted into your emuMMC (in the system settings)
13. (If not on 10.1.0) If you're in your emuMMC, open the Homebrew Launcher, preferably using title override (R on a game instead of using the photo album)
14. (If not on 10.1.0) Boot Daybreak
15. (If not on 10.1.0) Select the 10.1.0 update. Choose the 10.1.0 exFAT option, even though you're using FAT32.

Thank you so much for your guidance. I will follow this.

 

[Ihy]

One

I recommend following my instructions. Delete the CFW folders on your SD card and redownload Atmosphere 0.14.1.


Unless you are using online play with a clean sysMMC (or you have an ipatched Switch on 4.1), using an emuMMC is not recommended. If you are going to use an emuMMC anyway, follow these steps instead:

1. Make sure the SD card is FAT32.
2. Remove all CFW files/folders from your SD card (that would be folders like /sept/ and /atmosphere/)
3. Download the latest Atmosphere
4. Download the latest fusee-primary (next to Atmosphere)
5. Download these signature patches (for Atmosphere v0.14.1)
6. Put Atmosphere and the signature patches onto your SD card
7. Set "emummc!enabled = 1" in emummc/emummc.ini
8. (If not on 10.1.0) Download the 10.1.0 update and put the 10.1.0 folder onto the root of your SD card
9. Put the SD into your Switch
10. Enter RCM
11. Launch Atmosphere using fusee-primary
12. Check that you've booted into your emuMMC (in the system settings)
13. (If not on 10.1.0) If you're in your emuMMC, open the Homebrew Launcher, preferably using title override (R on a game instead of using the photo album)
14. (If not on 10.1.0) Boot Daybreak
15. (If not on 10.1.0) Select the 10.1.0 update. Choose the 10.1.0 exFAT option, even though you're using FAT32.

One more thing please, what do i do with the latest fusee-primary? Should i put them on the SD card too?

 

[Lacius]

One

One more thing please, what do i do with the latest fusee-primary? Should i put them on the SD card too?

You use fusee-primary to boot into Atmosphere using whatever method you're using to push RCM payloads. For example, if you're using TegraRcmGUI, you select fusee-primary.

 

[Ihy]

You use fusee-primary to boot into Atmosphere using whatever method you're using to push RCM payloads. For example, if you're using TegraRcmGUI, you select fusee-primary.

Thank you very much

 

[lpoolm]

Hi, sorry to jump on the thread but saves staring a new one.
I have the same issue but using sxos?
What can I update to get my games going?
Thanks

 

[Lacius]

Hi, sorry to jump on the thread but saves staring a new one.
I have the same issue but using sxos?
What can I update to get my games going?
Thanks

Make sure you're using the latest version of SX OS.

 

[Ihy]

1. Make sure the SD card is FAT32.
2. Remove all CFW files/folders from your SD card (that would be folders like /sept/ and /atmosphere/)
3. Download the latest Atmosphere
4. Download the latest fusee-primary (next to Atmosphere)
5. Download these signature patches (for Atmosphere v0.14.1)
6. Put Atmosphere and the signature patches onto your SD card
7. Put the SD into your Switch
8. Enter RCM
9. Launch Atmosphere using fusee-primary

The above steps will be slightly different if you're using an emuMMC.

Hi lacius, I need your trusted guidance once more. I had to format my SD card so I lost everything on it now the switch isn't booting, Can u guide me on the steps to take to get it working?

 

[Lacius]

Hi lacius, I need your trusted guidance once more. I had to format my SD card so I lost everything on it now the switch isn't booting, Can u guide me on the steps to take to get it working?

1. Make sure the SD card is FAT32.
2. Remove all CFW files/folders from your SD card (that would be folders like /sept/ and /atmosphere/)
3. Download the latest Atmosphere
4. Download the latest fusee-primary (next to Atmosphere)
5. Download these signature patches (for Atmosphere v0.14.1)
6. Put Atmosphere and the signature patches onto your SD card
7. Put the SD into your Switch
8. Enter RCM
9. Launch Atmosphere using fusee-primary

 

[Ihy]

1. Make sure the SD card is FAT32.
2. Remove all CFW files/folders from your SD card (that would be folders like /sept/ and /atmosphere/)
3. Download the latest Atmosphere
4. Download the latest fusee-primary (next to Atmosphere)
5. Download these signature patches (for Atmosphere v0.14.1)
6. Put Atmosphere and the signature patches onto your SD card
7. Put the SD into your Switch
8. Enter RCM
9. Launch Atmosphere using fusee-primary

Please what does FAT32 mean? How do I check if the card is that?

 

[Lacius]

Please what does FAT32 mean? How do I check if the card is that?

On your computer, check the properties of the SD card. If you're unsure, reformat the SD card using guiformat.

 

[Ihy]

1. Make sure the SD card is FAT32.
2. Remove all CFW files/folders from your SD card (that would be folders like /sept/ and /atmosphere/)
3. Download the latest Atmosphere
4. Download the latest fusee-primary (next to Atmosphere)
5. Download these signature patches (for Atmosphere v0.14.1)
6. Put Atmosphere and the signature patches onto your SD card
7. Put the SD into your Switch
8. Enter RCM
9. Launch Atmosphere using fusee-primary

Should also put the fuse-primary into the SD card?

 

[Lacius]

Should also put the fuse-primary into the SD card?

You don't need to, no. You will use fusee-primary with whatever method you use to push RCM payloads.