Hacking SWITCH NOOB PARADISE - Ask questions here

[miozet]

If other micro SD cards are also not working, it seems like the SD card slot is not working. You should return your switch then

I have tried only one 32gb microsd. It did not work.
Does 4.1.0 firmware supports 200gb? Or newer updates supports higher capacity carts?

 

[Baoh]

As I already said, it seems like you missed some step/s in the guide. Just follow it again and you will be fine.

Hi Aarti, nope I do 2 different guide it came an error says:

Unknown pkg1 version

what is mean?

 

[geeleonidas]

[deleted]

 

[Edward562]

I have a few questions before I finally install CFW to my switch when I get my RCMloader later this week:

1. Should I use exFAT or Fat32 when I reformat/partition my sd card? (I heard exFAT can lead to corruption but can handle bigger files)

2. I plan on using sysnand for online play and emunand for homebrew stuff, is there a way to transfer saves between the two? (I heard sysnand and emunand are basically treated as two different switches meaning seperate saves)

3. How hard it is to switch between sysnand and emunand? Is there a proper way to launch sysnand without risking a ban?

4. If I use 90dns or Incognito on my emunand, will this affect my sysnand's ability to play online?

Thanks in advance!

 

[aarti]

I have a few questions before I finally install CFW to my switch when I get my RCMloader later this week:

1. Should I use exFAT or Fat32 when I reformat/partition my sd card? (I heard exFAT can lead to corruption but can handle bigger files)

2. I plan on using sysnand for online play and emunand for homebrew stuff, is there a way to transfer saves between the two? (I heard sysnand and emunand are basically treated as two different switches meaning seperate saves)

3. How hard it is to switch between sysnand and emunand? Is there a proper way to launch sysnand without risking a ban?

4. If I use 90dns or Incognito on my emunand, will this affect my sysnand's ability to play online?

Thanks in advance!

1. You should use Fat32. Indeed exFat leads to corruption, and to use files on Fat32 bigger than 4GB, you can split them with splitNSP.

2. The saves from sysMMC will be copied to emuMMC when creating it. After that you can share saves only with Checkpoint, but that will make your sysMMC dirty.
Edit: Not true, as saves are stored in sysMMC and not sd card.

3. You will have to reboot your Switch everytime to switch between sysMMC and emuMMC.

4. No

 

[geeleonidas]

I have a few questions before I finally install CFW to my switch when I get my RCMloader later this week:

1. Should I use exFAT or Fat32 when I reformat/partition my sd card? (I heard exFAT can lead to corruption but can handle bigger files)

2. I plan on using sysnand for online play and emunand for homebrew stuff, is there a way to transfer saves between the two? (I heard sysnand and emunand are basically treated as two different switches meaning seperate saves)

3. How hard it is to switch between sysnand and emunand? Is there a proper way to launch sysnand without risking a ban?

4. If I use 90dns or Incognito on my emunand, will this affect my sysnand's ability to play online?

Thanks in advance!

1. I use FAT32 and I'm fine. There's Goldleaf v0.6.1 that is working flawlessly to install bigger nsps via USB. SD corruption is something that will certainly upset you (happened to me twice), so I recommend FAT32.

2. I don't recommend moving stuff from CFW to OFW (I don't know if saves are safe; I think they are, but you never know). Probably you can import your saves from OFW to CFW just copying the save folder, but I never tried it myself.

3. I assume you have a RCM exploitable switch. It isn't big of a deal tbh. It's very unlikely to get banned just by switching systems, I've never seen someone reporting this situation. So, if you don't mess up your sysnand in any way, you should be fine.

4. Consider that emuNAND and sysNAND are two different consoles (theoretically they are) that run on the same hardware. They don't bump into each other in any way (even if you erase emuNAND's serial number with incognito, sysNAND's continues existing).

 

[askara]

Is there any ways to use PS4/Xbox controller for Nswitch, wired or wirelessly?? or do you have to buy of those expensive adaptor?

 

[Baoh]

Guys I really don't understand why there si no way to enter in EmuMMC
Can i use the CFW SYS?
I remake 3 time the entire guide
https://nh-server.github.io/switch-guide/

But I have also the same result EmuMMC reload hakate only SYS CFW work, what can I do?

 

[AuroraBorealis]

While I do not personally use emuMMC, from what I understand, creating a second partition is much like creating the first one and the guide you are following is written by a competent user so I think you will be just fine.

Do you mind if I ask why dont you personally use emuMMC?

 

[boooluk]

hello all, is the new 8.1 cfw all good or should i stay at 6.2?

 

[Joeli53]

How people use emuMMC is they set one partition for loading CFW & homebrew, usually emuMMC, then play online in the other partition, usually sysMMC.

Unfortunately that guide does not have an emuMMC section yet but if you want a similar guide with an emuMMC guide, you can try this.

So, just wanted to confirm: if I created a emuNAND and did all of my CFW on that partition and then took my microSD card out, I'd be able to boot up the clean sysNAND with a separate microSD card that can go online without any risk? I didn't modify my sysNAND at all.

 

[Jinxthejiv]

does anyone know why when i install a forwarder NSP, it just stays a blank icon that cant be clicked and can only be deleted by going into the system settings to uninstall it

 

[pLaYeR^^]

hello all, is the new 8.1 cfw all good or should i stay at 6.2?

8.1.0 works fine.

So, just wanted to confirm: if I created a emuNAND and did all of my CFW on that partition and then took my microSD card out, I'd be able to boot up the clean sysNAND with a separate microSD card that can go online without any risk? I didn't modify my sysNAND at all.

You don‘t need to remove the micro sd card to boot to clean SysNAND.

 

[Jinxthejiv]

also another question, what would happen if you disable Emunand could you re enable it without any consequences

 

[boooluk]

thx for reply, does the new atmosphere have also the patches for the gamecard slot enabled by default?

 

[pLaYeR^^]

also another question, what would happen if you disable Emunand could you re enable it without any consequences

Yes, you can simply enable it again.

thx for reply, does the new atmosphere have also the patches for the gamecard slot enabled by default?

In the latest fusee-primary nogc is enabled by default. If you boot with hekate, it’s also enabled by default (never set autonogc to 0 if you care about gc slot in the ini hekate file).

 

[Jinxthejiv]

Yes, you can simply enable it again.

In the latest fusee-primary nogc is enabled by default. If you boot with hekate, it’s also enabled by default (never set autonogc to 0 if you care about gc slot in the ini hekate file).

alright thanks and do you by chance know why whenever i install a forwarder NSP through Tinfoil it just shows a blank icon that cant be clicked?

 

[pLaYeR^^]

alright thanks and do you by chance know why whenever i install a forwarder NSP through Tinfoil it just shows a blank icon that cant be clicked?

I have never used NSP forwarder. Maybe someone else can help you.

 

[Jinxthejiv]

I have never used NSP forwarder. Maybe someone else can help you.

alright thanks for your help

 

[boooluk]

i don`t see an ini file, just hope it is enabled, thx