Hacking SWITCH NOOB PARADISE - Ask questions here

Yojimbo001

Member
Newcomer
Joined
May 28, 2010
Messages
15
Trophies
0
XP
170
Country
Hello guys!! I have a 2nd hand Switch with an exploitable serial no. coming from ebay but the seller has updated it to 8.1.0 before sale ,im going to do an auto-rcm atmosphere set up and im not too bothered with online play so im wondering will i set up a legit nnid and link it to the switch before i mod or would that be ill advised ??? secondly is it safe to have tinfoil/incognito and wifi on post mod if i block dns etc??? (this is my first mod since back in the days of bannerbomb so sorry for noob questions) thanks for your time.
 
Last edited by Yojimbo001,

Lacius

Well-Known Member
Member
Joined
May 11, 2008
Messages
18,099
Trophies
3
XP
18,338
Country
United States
Yes, I will move the dock to a more accessible place.

But what is happening if the Switch died down out of battery (because I know it WILL happens even if I warned her) ?

Thank you
If it dies in Horizon, it probably won't be much of a headache. You will plug it into your computer and push a payload to get back into CFW.

If it dies fully, usually because it was accidentally put into RCM and left that way (RCM drains battery), then you might have to let it trickle charge for 30 minutes or an hour before it will be charged enough to enter RCM and accept a payload.
 

Trebuchet

Well-Known Member
Member
Joined
Jun 4, 2008
Messages
181
Trophies
1
Age
47
XP
321
Country
Canada
If it's within a game and died off, but with autorcm on, it will be the second option right? Unless there is a brick risk, it don't bother me too much.
 

Lacius

Well-Known Member
Member
Joined
May 11, 2008
Messages
18,099
Trophies
3
XP
18,338
Country
United States
If it's within a game and died off, but with autorcm on, it will be the second option right? Unless there is a brick risk, it don't bother me too much.
If it dies while you're playing a game, it will probably be the first option.

There is no real brick risk either way. If it fully dies, it just might take awhile for it to charge enough to boot into RCM again.
 

miodrag75

Member
Newcomer
Joined
Jul 6, 2019
Messages
5
Trophies
0
Age
48
XP
44
Country
Serbia, Republic of
My SD card now after update and remove ReinX
 

Attachments

  • Screen Shot 2019-07-07 at 19.08.11.png
    Screen Shot 2019-07-07 at 19.08.11.png
    164.6 KB · Views: 182

reflash

Member
Newcomer
Joined
Oct 4, 2018
Messages
21
Trophies
0
Age
36
XP
485
Country
Germany
Hey guys,

i'm thinking of creating another partition for emunand purposes. However I made my nand-backup with Reinx in january and i keep reading that this kind of nand backup is not clean at all. Is there anything i can do about that? Or do i just have to deal with the risk of getting banned when playing online? Or is, fingers crossed, the reinx backup clean and safe to use?

Greetings
 

Trebuchet

Well-Known Member
Member
Joined
Jun 4, 2008
Messages
181
Trophies
1
Age
47
XP
321
Country
Canada
If it dies while you're playing a game, it will probably be the first option.

There is no real brick risk either way. If it fully dies, it just might take awhile for it to charge enough to boot into RCM again.
Thanks man, you should add a tip link, you are really helpful.
 
  • Like
Reactions: Lacius

Poshkapish

Member
Newcomer
Joined
Nov 21, 2015
Messages
7
Trophies
0
Age
104
XP
111
Country
United States
I have a "clean" sysNAND on 5.1. I recently got emuMMC and used Choidujoir to upgrade it to the current Switch version 8.1.0 w/o burning fuses (does fuse count even matter on emuNAND?). So my next question is, will I need to get prod keys off of my emuNAND at the higher firmware in order to run backups? And, if so, how do I do it since it looks like I can only run lockpick on RCM for higher versions (and running it from RCM only gets the prodkeys off my lower-version sysNAND, right?)? Or could I just use the prod.keys from my 5.1 backup I made before I even hacked my Switch?

I'm guessing I'll need to upgrade sysNAND to 8.1.0 (w/o burning fuses of course) to get the prodkeys off of that for my emuNAND. Then just restore my sysNAND back to its "clean" state. But I want to ascertain this is what I have to do before I do it since it'll take a bit more time. I'm not aware if there's an easier solution or not.
 

ssps

New Member
Newbie
Joined
Jan 10, 2014
Messages
1
Trophies
0
Age
44
XP
78
Country
India
I recently bought a hacked switch with sx os license activated. I am waiting for my jig to arrive. Meanwhile I booted normally to check if everything works. I downloaded few demo games to check controls etc and everything works fine.

There is no nand backup. Can I take the backup now ? Also I won't play online so is it necessary to have emunand ?

Sent from my SM-M305F using Tapatalk
 

Lacius

Well-Known Member
Member
Joined
May 11, 2008
Messages
18,099
Trophies
3
XP
18,338
Country
United States
I recently bought a hacked switch with sx os license activated. I am waiting for my jig to arrive. Meanwhile I booted normally to check if everything works. I downloaded few demo games to check controls etc and everything works fine.

There is no nand backup. Can I take the backup now ? Also I won't play online so is it necessary to have emunand ?

Sent from my SM-M305F using Tapatalk
You can make a backup now using Hekate. If you aren't going to play online, you do not need an emuNAND.
 
  • Like
Reactions: ssps

miodrag75

Member
Newcomer
Joined
Jul 6, 2019
Messages
5
Trophies
0
Age
48
XP
44
Country
Serbia, Republic of
What is mean next


Uploading payload (mezzo size: 92, user size: 78294, total size: 144510, total padded size: 147456)...
Switched to high buffer
Smashing the stack!
Smashed the stack with a 0x7000 byte SETUP request!
Payload successfully injected
Error while injecting payload (RC=-99)
 

xplicatt

Member
Newcomer
Joined
Feb 18, 2010
Messages
23
Trophies
0
XP
178
Country
Canada
question. I've been reading alot into emunand,incognito and what not and i still can't find a definitive answer. say i download like mario maker 2 and i want to play it online and use its online feautures with emunand is this possible or would i need a store bought verion. And if i don't need a store bought version could you explain how to do this pls
 

Lacius

Well-Known Member
Member
Joined
May 11, 2008
Messages
18,099
Trophies
3
XP
18,338
Country
United States
question. I've been reading alot into emunand,incognito and what not and i still can't find a definitive answer. say i download like mario maker 2 and i want to play it online and use its online feautures with emunand is this possible or would i need a store bought verion. And if i don't need a store bought version could you explain how to do this pls
You cannot play online with a pirated game, and if you try, you will be banned.
 
  • Like
Reactions: xplicatt

Jroid3

Member
Newcomer
Joined
Jul 6, 2019
Messages
17
Trophies
0
Age
26
XP
36
Country
United Kingdom
No the problem is stemming either from your computer or USB cable. The fact that the payload isn't reaching your Switch isn't indicative of it being patched or not.

You can a list of Joy-Con pins and their respective functions here

Tried using a different cable. same results. nothing on the switch.
Tried using a different computer too. again, same results. nothing on the switch.

im genuinely baffled at this point as to what the problem could be.
 

Draxzelex

Well-Known Member
Member
Joined
Aug 6, 2017
Messages
18,986
Trophies
2
Age
29
Location
New York City
XP
13,325
Country
United States
Hey Is there a way to have your emuNAND online and not get that pesky reminder to update whenever I access a game? (ive accidentally updated in the past and would like to never experience that again)

Also is there a guide on terms when it comes to switch hacking? I'm getting lost understanding the differences between stuff like emuNAND sysNAND emuMMC etc...
If you are using Atmosphere, you can boot the stock emuMMC via Hekate to have the emuMMC online as safely as possible. As for a guide, you can find one here

Hey, everyone. I have installed Atmosphere, Renix and SXOS but i keep running into the same problem. After the Sept splash screen the console will not boot into CFW. Would be most grateful if anyone can help. Thanks
You cannot boot Atmosphere and ReiNX on the same SD card if the console's firmware version is at least 7.0. That is because both Atmosphere and ReiNX have their own sept folders needed to boot their respective CFW meaning you can only boot between ReiNX or Atmosphere after firmware 7.0.

Hello guys!! I have a 2nd hand Switch with an exploitable serial no. coming from ebay but the seller has updated it to 8.1.0 before sale ,im going to do an auto-rcm atmosphere set up and im not too bothered with online play so im wondering will i set up a legit nnid and link it to the switch before i mod or would that be ill advised ??? secondly is it safe to have tinfoil/incognito and wifi on post mod if i block dns etc??? (this is my first mod since back in the days of bannerbomb so sorry for noob questions) thanks for your time.
I would highly recommend you link a Nintendo Account on the console as soon as possible since certain content requires a linked account such as the NES application, Super Mario Maker 2, Bloodstained, Mortal Kombat 11, Stardew Valley, etc. Also you do not need Incognito if you are using a DNS server to block Nintendo traffic. One or the other, or even Airplane Mode/removing Wi-Fi settings, is sufficient.

Hey guys,

i'm thinking of creating another partition for emunand purposes. However I made my nand-backup with Reinx in january and i keep reading that this kind of nand backup is not clean at all. Is there anything i can do about that? Or do i just have to deal with the risk of getting banned when playing online? Or is, fingers crossed, the reinx backup clean and safe to use?

Greetings

I have a "clean" sysNAND on 5.1. I recently got emuMMC and used Choidujoir to upgrade it to the current Switch version 8.1.0 w/o burning fuses (does fuse count even matter on emuNAND?). So my next question is, will I need to get prod keys off of my emuNAND at the higher firmware in order to run backups? And, if so, how do I do it since it looks like I can only run lockpick on RCM for higher versions (and running it from RCM only gets the prodkeys off my lower-version sysNAND, right?)? Or could I just use the prod.keys from my 5.1 backup I made before I even hacked my Switch?

I'm guessing I'll need to upgrade sysNAND to 8.1.0 (w/o burning fuses of course) to get the prodkeys off of that for my emuNAND. Then just restore my sysNAND back to its "clean" state. But I want to ascertain this is what I have to do before I do it since it'll take a bit more time. I'm not aware if there's an easier solution or not.
Unfortunately, the only thing I can recommend is temporarily updating your sysMMC to the latest firmware to get the latest keys via Lockpick_RCM. You can simply use the homebrew application ChoiDujourNX to update your sysMMC firmware without burning fuses so that you can restore your NAND backup without any issues. Although you typically do not need keys unless you are converting files on your computer or datamining games. You can even find the keys on Google if you know where to look.

What is mean next


Uploading payload (mezzo size: 92, user size: 78294, total size: 144510, total padded size: 147456)...
Switched to high buffer
Smashing the stack!
Smashed the stack with a 0x7000 byte SETUP request!
Payload successfully injected
Error while injecting payload (RC=-99)
It means there might be something wrong with your USB cable, computer, or both.

Tried using a different cable. same results. nothing on the switch.
Tried using a different computer too. again, same results. nothing on the switch.

im genuinely baffled at this point as to what the problem could be.
Do you have an Android or rooted iOS device that you can try sending a payload with?
 

Trebuchet

Well-Known Member
Member
Joined
Jun 4, 2008
Messages
181
Trophies
1
Age
47
XP
321
Country
Canada
Paperclip jig issue : I got the no N screen two times (in 20 tentatives) but when I plug the usb cable, it boots normally. I guess it never went in RCM right?
 

Draxzelex

Well-Known Member
Member
Joined
Aug 6, 2017
Messages
18,986
Trophies
2
Age
29
Location
New York City
XP
13,325
Country
United States
Paperclip jig issue : I got the no N screen two times (in 20 tentatives) but when I plug the usb cable, it boots normally. I guess it never went in RCM right?
You can try booting into RCM after plugging in the USB cable meaning use the paperclip while it is plugged into your computer. You can also try using aluminum foil (temporarily) for booting into RCM but do not use it for an extended period of time. Enable AutoRCM as soon as you boot into RCM.
 
  • Like
Reactions: Lacius

Switchit

New Member
Newbie
Joined
Jul 7, 2019
Messages
3
Trophies
0
Age
33
XP
43
Country
United Kingdom
You cannot boot Atmosphere and ReiNX on the same SD card if the console's firmware version is at least 7.0. That is because both Atmosphere and ReiNX have their own sept folders needed to boot their respective CFW meaning you can only boot between ReiNX or Atmosphere after firmware 7.0.

Thank you for your reply. I have modded the PS2 and WII in the past, but i am pretty terrible at this, so please bear with me. I've tried booting them individually. Tried Atmosphere as soon as the sept splash came up and the screen goes blank after that, then i formated the card and tried ReiNX but still the same result. My Swith is on 7.0. Using sandisk 64GB ExFAT. when booting the switch up the Switch prompts me to update in order to read the card. I dont wanna update it Incase of a ban occurring. Should i try Open partition wizard and format the SDcard to FAT32 so the Switch will boot Atmosphere after going into RCM? Once again sorry for the Noob questions
 

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
    K3Nv2 @ K3Nv2: Pump the chocolate into my veins