Check the DSi Downgrading thread, it has pictures describing which points to solder.
https://gbatemp.net/threads/dsi-downgrading-the-complete-guide.393682/
Thanks for answering, but it seems that I'll need to already have an installed DSiWare title, which I don't have. My only option is hardmodding.Check the DSi Downgrading thread, it has pictures describing which points to solder.
https://gbatemp.net/threads/dsi-downgrading-the-complete-guide.393682/
More descriptive guides can easily be found for the 2ds/3ds, the process of dumping is nearly identical.
I found that the linked Anker reader did not work for me, you might try another listed in a 3ds guide or find this cheap generic reader that can be easily found on amazon or ebay.
https://gbatemp.net/threads/dsi-downgrading-the-complete-guide.393682/page-25#post-8459762
You need to get your eMMC id and console id to mod your nand. If you can copy any app to your sd card(even preinstalled) you can get your console id using SRL Extractor. If you have a Raspberry Pi or laptop with an SD reader that is not connected through usb you can get your eMMC id. If you have one, you can bruteforce the other with TWLbf. If you have an NVidia graphics card, you can bruteforce both with just the nand dump.
https://gbatemp.net/threads/twlbf-a-tool-to-brute-force-dsi-console-id-or-emmc-cid.481732/
From there you can inject a vulnerable DSiware and exploit or install Unlaunch directly.
Hmm... both mine and my friend's don't have it installed.I have to correct myself: flipnote studio was factory installed in the dsi sold in Europe. I checked on my DsiXL (bought NOS and still on firmware 1.0) and it is present so it should be installed also in your, unless someone did not cancelled it to recover a little bit of space.
Yes, you can swap the motherboard as long as they are both the same type.Thanks for answering, but it seems that I'll need to already have an installed DSiWare title, which I don't have. My only option is hardmodding.
I do actually have an already modded DSi, but the screen is broken. Would it be possible to switch the motherboard?
Yeah, all XL, not all small onesflipnote studio was factory installed in the dsi sold in Europe. I checked on my DsiXL
A DSiware copied to the SD is the fastest way to find the console ID - but it can be bruteforced given a nand backup and CID (which you can get with hardmod and an appropriate SD reader)it seems that I'll need to already have an installed DSiWare title