Homebrew Switch Hacking & Homebrew Discussion

Draxzelex

Well-Known Member
Member
Joined
Aug 6, 2017
Messages
19,012
Trophies
2
Age
29
Location
New York City
XP
13,392
Country
United States
Ok i was under the assumption that the stats on that thread was only gathered from when people posted in there. I did not realize you were proative in looking for people who posted in other threads as well. Thank you for your efforts then. I’ll stay monitored.
No you're good. In your defense, I don't specify where the information is collected from. Technically, I could gather data from all over the Internet but at the end of the day I'm only one person. I'd love to if I could but there's just too many places to check.
 

3DSDSXL

Well-Known Member
Member
Joined
Aug 20, 2012
Messages
186
Trophies
0
Location
UK
XP
599
Country
United Kingdom
Will we see a picodrive and mame4all emulators these are a must not talking about a core addon but a standalone emulators.
 

Draxzelex

Well-Known Member
Member
Joined
Aug 6, 2017
Messages
19,012
Trophies
2
Age
29
Location
New York City
XP
13,392
Country
United States
I'm on 3.0.2

Pros and cons of updating?
Firmwares 3.0.1-4.1 have an unreleased softmod that involves loading a webpage to boot Atmosphere/hacks in the future. If you do not want to have to use a jig and USB cable to load Atmosphere/hacks for a long time, stay on 3.0.2. You can also keep the console in sleep mode if you use the jig and USB cable once provided you make sure the Switch does not run out of battery.

If you want to update, follow this tutorial: https://gbatemp.net/threads/how-to-...nofficially-without-burning-any-fuses.507461/
You will be able to restore your 3.0.2 firmware at any time if you follow the guide properly. However, if you do update, your cartridges will no longer work on firmwares below 4.0 due to a patch that is applied in 4.0 which is so far irreversible and cannot be prevented.
 

NoSmokingBandit

Well-Known Member
Member
Joined
Jan 17, 2009
Messages
451
Trophies
0
XP
648
Country
United States
Firmwares 3.0.1-4.1 have an unreleased softmod that involves loading a webpage to boot Atmosphere/hacks in the future. If you do not want to have to use a jig and USB cable to load Atmosphere/hacks for a long time, stay on 3.0.2. You can also keep the console in sleep mode if you use the jig and USB cable once provided you make sure the Switch does not run out of battery.

If you want to update, follow this tutorial: https://gbatemp.net/threads/how-to-...nofficially-without-burning-any-fuses.507461/
You will be able to restore your 3.0.2 firmware at any time if you follow the guide properly. However, if you do update, your cartridges will no longer work on firmwares below 4.0 due to a patch that is applied in 4.0 which is so far irreversible and cannot be prevented.


Alright, so I'm going to be a pain. I'm not a noob to console modding, just new to the switch.

If the softmod was patched in 4.2 why haven't they released it? I'm just curious. Usually when things get patched they are released since it doesn't do any good to keep the secret.


If I go up to 5.1.0 do I just use the same method to go back to 3.0.2 later?
 

Draxzelex

Well-Known Member
Member
Joined
Aug 6, 2017
Messages
19,012
Trophies
2
Age
29
Location
New York City
XP
13,392
Country
United States
Alright, so I'm going to be a pain. I'm not a noob to console modding, just new to the switch.

If the softmod was patched in 4.2 why haven't they released it? I'm just curious. Usually when things get patched they are released since it doesn't do any good to keep the secret.


If I go up to 5.1.0 do I just use the same method to go back to 3.0.2 later?
Its fine, I don't mind answering questions.

Anyways, the reason it has not been released yet is because it has not been patched out yet. It works up to 4.1 because that is the farthest it has been tested. There are no more 4.X firmwares past 4.1. Firmware 5.0 is the next one after 4.1. That firmware also happens to include support for a new SoC that will patch out the current bootrom exploit that can be exploited on all current Switch revisions, regardless of firmware (because the bootrom is read-only). The new SoC is named Mariko and that exploit may be the only working one we have for those units once they are released (so far, no one has confirmed they are in the market).

Although the guide doesn't include a way to restore it, it can be used to return to 3.0.2. You would just have to replace the steps that involve putting in the new firmware files with ones from your old firmware.

Since you are new to the Switch scene, it might be worth reading my below post for a more detailed but concise post about the current Switch scene.
Let's start with what we do know. There are a number of untethered exploits. Some establish higher level access to the console. And depending on your firmware, there are certain homebrew you can utilize. For example, Pegaswitch is available for 3.0 and below but only has access to homebrew. The tethered coldboot works on all firmwares and grants you full access to the console at the cost of tethering. There are unreleased softmod warmboots that work all the way up to 4.1 but they have not been released yet. The softmod warmboot for 3.01-4.1 will not be released when the CFW is launched. This is speculation for the reasoning, but they have stated that they have not tested any exploits for 5.x as of yet. Since they have not released this exploit, Nintendo should not be aware of what to patch theoretically. So based on this logic, it holds that the 3.01-4.1 exploit may work on 5.x. There is a reason this is important.

I get the vibe that you are aware that Nintendo is planning on releasing a new Switch revision that takes care of the tethered coldboot, known as Mariko (based on the chip it uses). The current Switch revision, Erista, has a hole in its bootrom that cannot be patched out because it is read-only thus allowing all firmwares to be hacked. The reason we know Mariko is coming is because there was support added for it in firmware 5.0. Now because the tethered coldboot will no longer work on the Mariko Switches, we currently have no means of hacking them when they come out. This is where those unreleased exploits come into play as they may be the key for unlocking those consoles. The next part will help explain why you should buy sooner rather than later.

Now, the following is speculation after closely following the scene, but I think it will help to advise that you should buy an Erista Switch ASAP. We have no idea when the Mariko Switch will hit the market. Nintendo will most likely do a silent implementation of this revision. We have no idea how to even identify them, until they come out that is. So we can't warn users beforehand if they are buying a Mariko Switch or not. However, what we do know is why they are making it. And that is because of the unpatchable bootrom exploit. Originally, this exploit was planned to be released on June 15th by a team that alerted the manufacturers of the exploited chip of the problem. They notified them months in advance in hopes to give them enough time to implement a fix as the exploit had potential ramifications outside of the Switch. This same team is devoting all their current time towards developing the CFW, Atmosphere. Even though the CFW is still a WIP, they were still trying to finish it by the same time as they would disclose the exploit to the public, June 15th. The reason they have not tested any exploits for 5.x yet is because not only are they busy working on Atmosphere for the time being, but they may have a strong feeling that the Mariko Switches may be released sometime around that date. If Atmosphere can be finished by the time the Mariko Switches are out, it will give them the perfect opportunity to work on cracking the Mariko Switch with the unreleased softmod warmboot exploits for 3.01-4.1.

The long and the short of the last paragraph is that although we have no idea when the new Switch revision will hit the market, the longer you wait, the more risk you take that the Switch you purchase will be a Mariko unit. Of course, as long as it doesn't have 5.x then its guaranteed not to be a Mariko device. But this is why its strongly advised that now is the time to buy an exploitable Switch because at the current moment, there are no confirmed hacks that will work on Mariko.

My last point will be obtaining said sofmodded warmboot exploits. We have reason to believe that the untethered exploit for firmwares 3.0 and below may have been patched out because they indicated it will be released at the same time as the CFW. Whether it involves Pegaswitch or not is just speculation. The hard part is when they will release the one for 3.01-4.1. If it turns out that it does not work on 5.x, then similar to the one for 3.0 and below, they will release it as it has already been patched out so there's nothing holding them back on releasing it. But what if those exploits do work on 5.x? Now it becomes a guessing game as to when they'll release it, if at all since as you have noticed, exploits typically get released after they are fixed. For what its worth, I'm holding onto my 4.1 in the hopes of that untethered exploit because I don't like tethering either. But we will simply have to wait and see.

I cannot answer your questions on what hacking will be like in a year or two because a) I cannot see the future and b) anything is possible. However, I hope I answered all your questions with some history on how we got to our current point in Switch hacking. I would agree that the forums are a bit of a mess in terms of utilizing hacks and discerning right from wrong, but this should all be alleviated once the CFW comes out. As someone else once said, "We may not be as good as a LGQT support group, but we are getting there".
 

fenomeno0chris

Well-Known Member
Member
Joined
Oct 6, 2015
Messages
155
Trophies
0
Age
32
XP
1,348
Country
Germany
Hi Ive noticed there are some new methods to play eShop games.
Right now Im only using xci games. Is there a method to install additional DLCs to those xci games?
Or is the XCI format now obsolete and I have to use a different method to play games with DLCs included?
 

Znuf

Well-Known Member
Newcomer
Joined
Nov 10, 2017
Messages
57
Trophies
0
Age
37
XP
660
Country
Switzerland
Their is a way to extract savegame from a nand backup ?

I upgraded to 5.1 wituout burn fuse and i profit to clean my switch. Now, i lost some save game.
 

qaz015393

Well-Known Member
Member
Joined
Jan 28, 2009
Messages
826
Trophies
1
XP
851
Country
United States
What homebrew/s work on below 3.0fw?Imy Switch is on 2.0.0 and I'm not updating it abd waiting for an update for cfw whenever that comes.
 

HardMind

Well-Known Member
Newcomer
Joined
Jul 29, 2018
Messages
78
Trophies
0
Age
28
XP
536
Country
United Kingdom
dose anyone have a problem with Dragon Quest heroes 1&2 ? I tried to play it from os 14 and then gave me massage "the game card could not be read"
I hope this is a right place to ask.
 

dfsa3fdvc1

Well-Known Member
Member
Joined
Jan 3, 2015
Messages
226
Trophies
0
XP
214
Country
Albania
What is the best way for a noob to begin development?

On 3DS I used an lua interpreter and tested my programs via Citra 3DS emulator.
Now with switch I'm looking for something similar. A simple way to display Text, images, and play audio.

I do most of my work guess & check style. I can't imagine having to remove my SD and resend the payload every time I want to test a new version.
Are the Switch emulators good enough now they could be used to test homebrew?
 
Last edited by dfsa3fdvc1,

phaie

Member
Newcomer
Joined
Aug 3, 2018
Messages
17
Trophies
0
Age
35
XP
189
Country
Brazil
How can i extract dlc of game?i have got the base.nca and dlc.nca but hactool doesn't work and shows section0 error
 

bandar

Well-Known Member
Newcomer
Joined
Jan 27, 2017
Messages
85
Trophies
0
Age
29
XP
281
Country
Saudi Arabia
Now that my CDN is banned. Is there a way I could download game updates from the switch itself? I know there is an app which I'm not going to mention the name of it that downloads these things on pc but I want something that I could use on my switch.
 

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
    DinohScene @ DinohScene: ahh nothing beats a coffee disaronno at work